References
- Abbas, A., Seo, J., & Kim, M. (2020). Impact of mobile augmented reality system on cognitive behavior and performance during rebar inspection tasks. Journal of Computing in Civil Engineering, 34(6). Article 04020050. doi: 10.1061/(ASCE)CP.1943-5487.0000931
- ACI Committee 318. (2019). Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary. American Concrete Institute: Farmington Hills, MI 48331. doi: 10.14359/51716937.
- Aldabagh, S., Abed, F., & Yehia, S. (2018). Effect of types of concrete on flexural behavior of beams reinforced with high-strength steel bars. ACI Structural Journal, 115, pp. 351-364. doi: 10.14359/51701105
- Aldabagh, S., & Alam, M. S. (2020). High-Strength Steel Reinforcement (ASTM A1035/A1035M Grade 690): State-of-the-art review. Journal of Structural Engineering, 146(8), p. 03120003. doi: 10.1061/(ASCE)ST.1943-541X.0002720
- Arabshahi, M., Wang, D., Sun, J., Rahnamayiezekavat, P., Tang, W., Wang, Y., et al. (2021). Review on sensing technology adoption in the construction industry. Sensors, 21(24), p. 8307. doi: 10.3390/s21248307
- Aryan, A., Bosché, F., & Tang, P. (2021). Planning for terrestrial laser scanning in construction: A review. Automation in Construction, 125(W2), p. 103551. doi: 10.1016/j.autcon.2021.103551
- Aslam, M., Gao, Z., & Smith, G. (2020). Framework for selection of lean construction tools based on lean objectives and functionalities. International Journal of Construction Management, 22(3), pp. 1-12. doi: 10.1080/15623599.2020.1729933
- Bang, S., Kim, H., & Kim, H. (2017). UAV-based automatic generation of high-resolution panorama at a construction site with a focus on preprocessing for image stitching. Automation in Construction, 84, pp. 70-80. doi: 10.1016/j.autcon.2017.08.031
- Barcley, L., & Kowalsky, M. (2020). Seismic performance of circular concrete columns reinforced with high-strength steel. Journal of Structural Engineering, 146(2), p. 04019198. doi: 10.1061/(ASCE)ST.1943-541X.0002452
- Cheng, J. C., Chen, K., & Chen, W. (2020). State-of-the-art review on mixed reality applications in the AECO industry. Journal of Construction Engineering and Management, 146(2). Article 03119009. doi: 10.1061/(ASCE)CO.1943-7862.0001749
- Choi, W., Na, S., & Heo, S. (2024). Integrating drone imagery and AI for improved construction site management through building information modeling. Buildings, 14(4), p. 1106. doi: 10.3390/buildings14041106
- Dan, Y., Shen, Z., Xiao, J., Zhu, Y., Huang, L., & Zhou, J. (2021). HoloDesigner: A mixed reality tool for on-site design. Automation in Construction, 129. Article ID 103808. doi: 10.1016/j.autcon.2021.103808
- Dinis, F. M., Sanhudo, L., Martins, J. P., & Ramos, N. M. (2020). Improving project communication in the architecture, engineering, and construction industry: Coupling virtual reality and laser scanning. Journal of Building Engineering, 30(1), p. 101287. doi: 10.1016/j.jobe.2020.101287
- Du, S., Teng, F., Zhuang, Z., Dong, Z., Li, M., Li, H., et al. (2024). A BIM-enabled robot control system for automated integration between rebar reinforcement and 3D concrete printing. Virtual and Physical Prototyping, 19(1). Article e2332423. doi: 10.1080/17452759.2024.2332423
- Ejidike, C., Mewomo, M., Olawumi, T., & Esangbedo, O. (2024). A Review of the Benefits of Automation and Robotic Application in Building Construction, Computing in Civil Engineering: Data. Sensing, and Analytics. American Society of Civil Engineers (ASCE): Reston, VA, USA. pp. 796–803. doi: 10.1061/9780784485224.096
- Freimuth, H., & König, M. (2018). Planning and executing construction inspections with unmanned aerial vehicles. Automation in Construction, 96, pp. 540-553. doi: 10.1016/j.autcon.2018.10.016
- Garcés, G., & Peña, C. (2023). A review on lean construction for construction project management. Revista ingeniería de construcción, 38(1), pp. 43-60. doi: 10.7764/ric.00051.21
- Gunarathne, A. S., Zainudeen, N., Perera, C. S. R., & Perera, B. A. K. (2020). A framework of an integrated sustainability and value engineering concepts for construction projects. International Journal of Construction Management, 22(3), p. 510–522. doi: 10.1080/15623599.2020.1768624
- Hamledari, H., Sajedi, S., McCabe, B., & Fischer, M. (2021). Automation of inspection mission planning using 4D BIMs and in support of unmanned aerial vehicle–based data collection. Journal of Construction Engineering and Management, 147(3). Article 04021001. doi: 10.1061/(ASCE)CO.1943-7862.0001995
- Hammad, A. W. A., da Costa, B. B. F., Soares, C. A. P., & Haddad, A. N. (2021). The use of unmanned aerial vehicles for dynamic site layout planning in large-scale construction projects. Buildings, 11(12), p. 602. doi: 10.3390/buildings11120602
- Han, K. K., & Golparvar-Fard, M. (2017). Potential of big visual data and building information modeling for construction performance analytics: An exploratory study. Automation in Construction, 73(11), p. 184–198. doi: 10.1016/j.autcon.2016.11.004
- Ikuabe, M., Aghimien, D., Aigbavboa, C., & Oke, A. (2020). Exploring the adoption of digital technology at the different phases of construction projects in South Africa. Proceedings of the International Conference on Industrial Engineering and Operations Management. IEOM Society International: Dubai, UAE, pp. 10-12. https://index.ieomsociety.org/index.cfm/item/41996.
- Ikuabe, M., Aghimien, D., Aigbavboa, C., & Oke, A. (2025). Wellington Didibhuku Thwala laser scanning technology for construction project delivery in developing economies: A confirmatory factor analysis of hindering factors. Journal of Science and Technology Policy Management, 16(10), pp. 79-97. doi: 10.1108/JSTPM-09-2022-0148
- Katiyar, A., & Kumar, P. (2021). A review of Internet of Things (IoT) in construction industry: Building a better future. International Journal of Advanced Science Computing and Engineering, 3(2), pp. 65-72. doi: 10.30630/ijasce.3.2.53
- Keyvanfar, A., Shafaghat, A., & Rosley, M. S. (2022). Performance comparison analysis of 3D reconstruction modeling software in construction site visualization and mapping. International Journal of Architectural Computing, 20(3), pp. 453-475. doi: 10.1177/14780771211066876
- Kim, D., Liu, M., Lee, S., & Kamat, V. R. (2019). Remote proximity monitoring between mobile construction resources using camera-mounted UAVs. Automation in Construction, 99(12), pp. 168-182. doi: 10.1016/j.autcon.2018.12.014
- Kissi, E., Boateng, E. B., Adjei-Kumi, T., & Badu, E. (2016). Principal component analysis of challenges facing the implementation of value engineering in public projects in developing countries. International Journal of Construction Management, 17, pp. 142-150. doi: 10.1080/15623599.2016.1233088
- Kopsida, M., & Brilaki, I. (2023). Real-time volume-to-plane comparison for mixed reality-based progress monitoring. Journal of Computing in Civil Engineering, 34(4). Article 04020023. doi: 10.1061/(ASCE)CP.1943-5487.0000896
- Leite, F., Cho, Y., Behzadan, A., Lee, S., Choe, S., Fang, Y., et al. (2016). Visualization, information modeling, and simulation: Grand challenges in the construction industry. Journal of Computing in Civil Engineering, 30(6), p. 4016035. doi: 10.1061/(ASCE)CP.1943-5487.0000604
- Liu, L., Xin, Y., Liu, B., Pang, Y., & Kong, W. (2025). The panel threshold analysis of digitalization on manufacturing industry’s green total factor productivity. Scientific Reports, 15:4336. doi: 10.1038/s41598-025-86643-2
- Li, X., Yi, W., Chi, H. L., & Wang, X. (2018). A critical review of virtual and augmented reality (VR/AR) applications in construction safety. Automation in Construction, 86, pp. 150-162. doi: 10.1016/j.autcon.2017.11.003
- Maleek, R., Litchi, D., & Ruwanpura, J. (2018). Robust segmentation of planar and linear features of terrestrial laser scanner point clouds acquired from construction sites. Sensors, 18(3), p. 819. doi: 10.3390/s18030819
- Moselhi, O., Bardareh, H., & Zhu, Z. (2020). Automated data acquisition in construction with remote sensing technologies. Applied Sciences, 10(8), p. 2846. doi: 10.3390/app10082846
- Motawa, I., & Kardakou, A. (2018). Unmanned aerial vehicles (UAVs) for inspection in construction and building industry. Proceedings of the 16th International Operation and Maintenance Conference. Cairo, Egypt, pp. 18-20.
- Naji, K. K., Gunduz, M., Alhenzab, F., & Al-Hababi, H. (2024). A systematic review of the digital transformation of the building construction industry. IEEE Access, 12, pp. 31461-31487. doi: 10.1109/ACCESS.2024.3365934
- Nguyen, T., Nguyen, P., & Do, S. (2020). Application of BIM and 3D laser scanning for quantity management in construction projects. Advances in Civil Engineering, pp. 01-10. Article: 8839923. doi: 10.1155/2020/8839923
- Noruwa, B. I., Arewa, A. O., & Merschbrock, C. (2022). Effects of emerging technologies in minimising variations in construction projects in the UK. International Journal of Construction Management, 22(11), pp. 2199-2206. doi: 10.1080/15623599.2020.1772530
- Ogunseiju, O., Akanmu, A., & Bairaktarova, D. (2021). Mixed reality-based environment for learning sensing technology applications in construction. Journal of Information Technology in Construction, 26, pp. 863-885. doi: 10.36680/j.itcon.2021.046
- Oke, A. E., Kineber, A. F., Albukhari, I., Othman, I., & Kingsley, C. (2021). Assessment of cloud computing success factors for sustainable construction industry: The case of Nigeria. Buildings, 11(2), p. 36. doi: 10.3390/buildings11020036
- Park, J., Kim, K., & Cho, Y. K. (2016). Framework of automated construction-safety monitoring using cloud-enabled BIM and BLE mobile tracking sensors. Journal of Construction Engineering and Management, 143(2), p. 05016019. doi: 10.1061/(ASCE)CO.1943-7862.0001223
- Ruiz, R. D. B., Lordsleem, Jr., A. C., Rocha, J. H. A., & Irizarry, J. (2021). Unmanned Aerial Vehicles (UAV) as a tool for visual inspection of building facades in AEC+FM industry. Construction Innovation, 22, pp. 1155-1170. doi: 10.1108/CI-07-2021-0129
- Shanbari, H., Blinn, N., & Issa, R. (2016). Laser scanning technology and BIM in construction management education. Special issue 9th AiC BIM Academic Symposium & Job Task Analysis Review Conference, p. 204-217. https://www.itcon.org/2016/14.
- Siebert, S., & Teizer, J. (2014). Mobile 3D mapping for surveying earthwork projects using an Unmanned Aerial Vehicle (UAV) system. Automation in Construction, 41, pp. 1-14. doi: 10.1016/j.autcon.2014.01.004
- Skrzypczak, I., Oleniacz, G., Leśniak, A., Zima, K., Mrówczyńska, M., & Kazak, J. K. (2022). Scan-to-BIM method in construction: Assessment of the 3D building model accuracy in terms inventory measurements. Building Research and Information, 50(8), pp. 859-880. doi: 10.1080/09613218.2021.2011703
- Štefanič, M., & Stankovski, V. (2018). A review of technologies and applications for smart construction. ICE Proceedings Civil Engineering, 172(2), pp. 1-23. doi: 10.1680/jcien.17.00050
- Tang, X., Wang, M., Wang, Q., Guo, J., & Zhang, J. (2022). Benefits of terrestrial laser scanning for construction QA/QC: A time and cost analysis. Journal of Management in Engineering, 38(2), p. 05022001. doi: 10.1061/(ASCE)ME.1943-5479.0001012
- Tkac, M., Mesaros, P., & Mandicak, T. (2018). Terrestrial laser scanning – effective technology for creating building information models. Pollack Periodica, 13(3), pp. 61-72. doi: 10.1556/606.2018.13.3.7
- Uotila, U., Saari, A., & Junnonen, J. (2021). Investigating the barriers to laser scanning implementation in building refurbishment. Journal of Information Technology in Construction, 26, pp. 249-262. doi: 10.36680/j.itcon.2021.014
- Willkens, D. S., Liu, J., & Alathamneh, S. (2024). A case study of integrating Terrestrial Laser Scanning (TLS) and Building Information Modeling (BIM) in heritage bridge documentation: The Edmund Pettus bridge. Buildings, 14(7), p. 1940. doi: 10.3390/buildings14071940
- Wu, C., Wu, P., Wang, J., Jiang, R., Chen, M., & Wang, X. (2020). Critical review of data-driven decision-making in bridge operation and maintenance. Structure and Infrastructure Engineering, 18(1), pp. 47-70. doi: 10.1080/15732479.2020.1833946
- Wu, C., Yuan, Y., Tang, Y., & Tian, B. (2021). Application of terrestrial laser scanning (TLS) in the architecture, engineering and construction (AEC) industry. Sensors, 22(1), p. 265. doi: 10.3390/s22010265
- Wu, S., Hou, L., Zhang, G., & Chen, H. (2022). Real-time mixed reality-based visual warning for construction workforce safety. Automation in Construction, 139(2). Article 104252. doi: 10.1016/j.autcon.2022.104252
- Zelenyuk, V. (2023). Productivity analysis: Roots, foundations, trends and perspectives. Journal of Productivity Analysis, 60(3), pp. 1-19. doi: 10.1007/s11123-023-00692-1
- Zhang, C., Wang, F., Zou, Y., Dimyadi, J., Guo, B. H., & Hou, L. (2023). Automated UAV image-to-BIM registration for building façade inspection using improved generalised Hough transform. Automation in Construction, 153(6), p. 104957. doi: 10.1016/j.autcon.2023.104957
- Zhang, X., Mao, X., & AbouRizk, S. M. (2008). Developing a knowledge management system for improved value engineering practices in the construction industry. Automation in Construction, 18(6), pp. 777-789. doi: 10.1016/j.autcon.2009.03.004