References
- [1] Zhang, Y., Yu, H., Pan, X. (2015). Geometrical error identification and compensation for grinding machine by crankshaft roundness measuring. Chemical Engineering Transactions, 46, 1099-104. https://doi.org/10.3303/CET1546184
- [2] Chybowski, L., Nozdrzykowski, K., Grządziel, Z., Jakubowski, A., Przetakiewicz, W. (2020). Method to increase the accuracy of large crankshaft geometry measurements using counterweights to minimize elastic deformations. Applied Sciences, 10 (14), 4722. https://doi.org/10.3390/app10144722
- [3] Fang, J., Hu, C., Pang, C., Liu, Y., Wang, L. (2015). Development and application of precision coordinate measuring technology. Aeronautical Manufacturing Technology, 7, 38-41.
- [4] Bosch, J.A. (2011). Coordinate Measuring Machines and Systems. New York: Marcel Dekker, Inc.
- [5] Geng, H. (2006). Development of Fully Automatic Camshaft Flexible Measuring Instrument. Sichuan: Sichuan University.
- [6] Zhang, P. (2010). Research on Automatic Camshaft Measuring Instrument. Xi’an: Xi’an Shiyou University.
- [7] Zhang, W. (2015). Research on key Technology of Crankshaft and Camshaft Measuring Instrument. Shanghai: Shanghai University.
- [8] Deng, Y. (2017). Research on Key Technology of Automatic Comprehensive Measurement of Asymmetric Axis Parts. Shanghai: Shanghai University.
- [9] Guo, H. (2017). Design and Research of Vehicle Engine Crankshaft Automatic Detection System. Xi’an: Xi’an University of Technology.
- [10] Yousuf, L.S., Marghitu, D.B. (2016). Experimental and simulation of a cam and translated roller follower over a range of speeds. In International Mechanical Engineering Congress and Exposition. ASME. https://doi.org/10.1115/IMECE2016-65506
- [11] Xie, C., Yuan, D., Ren, D., Zhao, H., Tao, X., Zhu, X. (2018). Calibration and compensation of dynamic abbe errors of a coordinate measuring machine. Journal of Dynamic Systems, Measurement, and Control, 140 (5), 051001. https://doi.org/10.1115/1.4038171
- [12] Yu, J., Pei, X., Bi, S., Zong, G., Zhang, X. (2010). Research progress on design method of flexure hinge mechanism. Journal of Mechanical Engineering, 46 (13), 2-13.
- [13] Awtar, S., Mariappan, D.D. (2017). Experimental measurement of the bearing characteristics of straightline flexure mechanisms. Precision Engineering, 49, 1-14. https://doi.org/10.1016/j.precisioneng.2016.12.014
- [14] Zhao, Y., Liu, J., Han, L. (2007). Research on double compound parallel four-bar mechanism. Aviation Precision Manufacturing Technology, 4, 17-21.
- [15] Wang, H., Wang, Y., Bai, Z. (2012). Stiffness analysis and experimental test of planar flexure hinge steering mechanism. Journal of Xi ‘an Polytechnic University, 32 (8), 631-635.
- [16] Papananias, M., Fletcher, S., Longstaff, A.P., Forbes, A.B. (2017). Uncertainty evaluation associated with versatile automated gauging influenced by process variations through design of experiments approach. Precision Engineering, 49, 440-455. https://doi.org/10.1016/j.precisioneng.2017.04.007