References
- [1] Liu, C.Z., Yin, X.S., Liao, Y.H., Yi, Y.Y., Qin D.T. (2020). Hybrid dynamic modeling and analysis of the electric vehicle planetary gear system. Mechanism and Machine Theory, 150, 103860. https://doi.org/10.1016/j.mechmachtheory.2020.10386010.1016/j.mechmachtheory.2020.103860
- [2] Smith, J.D. (2003). Gear Noise and Vibration. New York: Marcel Dekker.10.1201/9781482276275
- [3] Smith, R.E. (1986). Identification of gear noise with single flank composite measurement. Gear Technology, May/Jun, 17-29.
- [4] Smith, R.E. (1988). The relationship of measured gear noise to measured gear transmission errors. Gear Technology, Jan/Feb, 38-47.
- [5] Palermo, A., Britte, L., Janssens, K., Mundo, D., Desmet, W. (2018). The measurement of Gear Transmission Error as an NVH indicator: Theoretical discussion and industrial application via low-cost digital encoders to an all-electric vehicle gearbox. Mechanical Systems and Signal Processing, 110, 368-389. https://10.1016/j.ymssp.2018.03.00510.1016/j.ymssp.2018.03.005
- [6] Munro, R.G. (1969). Effect of geometrical errors on the transmission of motion between gears. Institution of Mechanical Engineers, 184 (15), 79-84. https://doi.org/10.1243/PIME_CONF_1969_184_445_0210.1243/PIME_CONF_1969_184_445_02
- [7] Shi, Z.Y., Kang, Y., Lin, J.C. (2010). Comprehensive dynamics model and dynamic response analysis of a spur gear pair based on gear pair integrated error. Journal of Mechanical Engineering, 46 (17), 55-61. https://10.3901/JME.2010.17.05510.3901/JME.2010.17.055
- [8] Munro, R.G. (1979). Review of the single flank method for testing gears. Annals of CIRP, 28 (1), 325-329.
- [9] Smith, R.E. (2003). Single-flank testing of gears. Gear Technology, Mar/Apr, 18-21.
- [10] Shi, Z.Y., Ren, X.L., Yu, B., Li, H.Z., Zhang, L.T., Ye, Y., Li, P. (2019). Development of transmission error dynamic testing machine for plastic gear. Journal of Mechanical Transmission, 43 (9), 144-147. https://10.16578/j.issn.1004.2539.2019.09.025
- [11] Shi, Z.Y., Zhang, W.N., Qu, H.F. (2011). Development of measuring machine based on single-flank testing for fine-pitch gears. Chinese Journal of Scientific Instrument, 32 (4), 913-919. https://10.19650/j.cnki.cjsi.2011.04.030
- [12] Zhang, Z.L., Huang, T.N., Huang, S.L., Kang, D.Y., Wang, H., Duan, R.G., Xu, L. (1997). A new kind of gear measurement technique. Measurement Science & Technology, 8 (7), 715-720. https://doi.org/10.1088/0957-0233/8/7/00410.1088/0957-0233/8/7/004
- [13] Shi, Z.Y., Wang, X.Y., Shu, Z.H. (2016). Theoretical method for calculating the unit curve of gear integrated error. Journal of Mechanical Design, 138 (3), 033301. https://doi.org/10.1115/1.403240010.1115/1.4032400
- [14] Shi, Z.Y., Shu, Z.H., Yu, B., Wang, T., Wang X.Y. (2017). Gear reverse-order meshing—phenomenon, analysis, and application. Journal of Mechanical Design, 139 (12), 124502. https://doi.org/10.1115/1.403779910.1115/1.4037799
- [15] Huang, T.N. (1973). Gear dynamic composite error and its measurement method. Science in China, 17 (4), 434-453.
- [16] Litvin, F.L., Lu, J., Townsend, D.P., Howkins, M. (1999). Computerized simulation of meshing of conventional helical involute gears and modification of geometry. Mechanism and Machine Theory, 34 (1), 123-147. https://doi.org/10.1016/S0094-114X(98)00013-510.1016/S0094-114X(98)00013-5
- [17] Litvin, F.L., Fuentes, A., Gonzalez-Perez, I., Carvenali, L., Kawasaki, K., Handschuh, R.F. (2003). Modified involute helical gears: Computerized design, simulation of meshing and stress analysis. Computer Methods in Applied Mechanics and Engineering, 192 (33-34), 3619-3655. https://doi.org/10.1016/S0045-7825(03)00367-010.1016/S0045-7825(03)00367-0
- [18] Goch, G. (2003). Gear metrology. CIRP Annals - Manufacturing Technology, 52 (2), 659-695. https://doi.org/10.1016/S0007-8506(07)60209-110.1016/S0007-8506(07)60209-1
- [19] Shi, Z.Y., Lin, H., Lin, J.C., Zhang B. (2013). Current status and trends of large gears metrology. Journal of Mechanical Engineering, 49 (10), 35-44. https://10.3901/JME.2013.10.03510.3901/JME.2013.10.035
- [20] Li, H.N., Chen, S.Y., Tang, J.Y., Chen, W.T., Ouyang, H.W. (2019). A novel approach for calculating no-load static transmission error based on measured discrete tooth surfaces. Mechanism and Machine Theory, 138, 112-123. https://doi.org/10.1016/j.mechmachtheory.2019.03.04410.1016/j.mechmachtheory.2019.03.044
- [21] Yu, B., Shi, Z.Y., Lin, J.C. (2017). Topology modification method based on external tooth-skipped gear honing. The International Journal of Advanced Manufacturing Technology, 92 (9), 4561-4570. https://doi.org/10.1007/s00170-017-0463-210.1007/s00170-017-0463-2
- [22] International Organization for Standardization (ISO). (2013). Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth. ISO 1328-1:2013.