Processing Accuracy of Instantaneous Values of a Stochastic Signal in an Inertial Measurement System

Adam Kowalczyk; Rafał Chorzępa

doi:10.2478/msr-2020-0019

.blurhash-client-img { display: none !important; }

Processing Accuracy of Instantaneous Values of a Stochastic Signal in an Inertial Measurement System

Measurement Science Review

Volume 20 (2020): Issue 4 (August 2020)

By: Adam Kowalczyk and Rafał Chorzępa

Open Access

|Aug 2020

Abstract

The article presents an analysis of the dynamic error occurring when processing a stochastic signal in an inertial measurement system. The problem was illustrated using both a calculation and a laboratory example. The technique of conditional averaging of signals was used in the experiment. The possibility to minimize the root mean square value of the error as well as the need for a time correction of measurement values in an inertial measurement system was demonstrated.

References

[1] Hagel, R., Zakrzewski, J. (1984). Miernictwo dynamiczne (Dynamic Measurement). Warsaw, Poland: WNT.
Search in Google Scholar Back to article
[2] Granovskij, V. A. (1984). Динамические измерения (Dynamic Measurements). Leningrad, Russia: Energoatomizdat.
Search in Google Scholar Back to article
[3] Woschni, E.G. (1972). Messdynamik (Dynamic Measurement). Leipzig, Germany: Hirzel Verlag.
Search in Google Scholar Back to article
[4] Vujicic, V. (2001). Generalized low-frequency stochastic true RMS instrument. IEEE Transactions on Instrumentation and Measurement, 50 (5), 1089-1092.10.1109/19.963164
Search in Google Scholar Back to article
[5] Sovilj, P.M., Milovancev, S.S., Vujicic, V. (2011). Digital stochastic measurement of a nonstationary signal with an example of EEG signal measurement. IEEE Transactions on Instrumentation and Measurement, 60 (9), 3230-3232.10.1109/TIM.2011.2128670
Search in Google Scholar Back to article
[6] Kamenský, M., Kováč, K. (2011). Correction of ADC errors by additive iterative method with dithering. Measurement Science Review, 11 (1), 15-18.10.2478/v10048-011-0004-3
Search in Google Scholar Back to article
[7] Pjevalica, V., Pjevalica, N., Kastelan, I., Petrovic, N. (2018). Acceleration of digital stochastic measurement simulation based on concurrent programming. Elektronika ir Elektrotechnika, 24 (6), 21-27.10.5755/j01.eie.24.6.22284
Search in Google Scholar Back to article
[8] Bendat, J.S., Piersol, A.G. (2000). Random Data – Analysis and Measurement Procedures. Wiley.
Search in Google Scholar Back to article
[9] Papoulis, A. (1972). Prawdopodobieństwo, zmienne losowe i procesy stochastyczne (Probability, Random Variables, and Stochastic Processes). Warsaw, Poland: WNT.
Search in Google Scholar Back to article
[10] Shanmugan, K.S., Breipohl, A.M. (1988). Random Signals Detection, Estimation and Data Analysis. Wiley.
Search in Google Scholar Back to article
[11] Kowalczyk, A., Szlachta, A., Hanus, R, Chorzepa, R. (2017). Estimation of conditional expected value for exponentially autocorrelated data. Metrology and Measurement Systems, 24 (1), 69-78.10.1515/mms-2017-0005
Search in Google Scholar Back to article
[12] Kowalczyk, A. (2015). Pomiarowe zastosowania warunkowego uśredniania sygnałów. Rzeszów, Poland: Politechnika Rzeszowska, ISBN 978-83-7934-011-8.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/msr-2020-0019 | Journal eISSN: 1335-8871

Journal RSS Feed

Language: English

Page range: 157 - 161

Submitted on: Mar 3, 2020

Accepted on: Aug 5, 2020

Published on: Aug 24, 2020

Published by: Slovak Academy of Sciences, Institute of Measurement Science

In partnership with: Paradigm Publishing Services

Publication frequency: Volume open

Keywords:

delay,

Related subjects:

Electrical engineering,

Control engineering, metrology and testing

© 2020 Adam Kowalczyk, Rafał Chorzępa, published by Slovak Academy of Sciences, Institute of Measurement Science
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 20 (2020): Issue 4 (August 2020)