References
- [1] Rabinovich, Ph.N. (2004). Composites Based on Dispersed Reinforced Concrete. Questions of Theory and Design, Technology, Constructions. Moscow, Russia: ASV. (in Russian)
- [2] Morgun, V.N., Morgun, L.V., Visnap, A.V. (2015). The usage of reinforcement in fiber reinforced foam concrete products. Construction Materials, 7, 52-54. (in Russian)
- [3] Yu, L., Liu, Z. (2016). Mechanical properties optimization of fiber reinforced foam concrete. MATEC Web of Conferences, 67, 03022. DOI: 10.1051/matecconf/2016703022.10.1051/matecconf/2016703022
- [4] Noor Md. Sadiqul Hasan, Habibur Rahman Sobuz, Md. Shiblee Sayed, Md. Saiful Islam. (2012). The use of coconut fibre in the production of structural lightweight concrete. Journal of Applied Sciences, 12, 831-839. DOI: 10.3923/jas.2012.831.839.10.3923/jas.2012.831.839
- [5] Domnina, K.L., Sotnikova, M.V. (2018). On the issue of the compressive strength of fine-grained fiber-reinforced concrete. Science of Udmurtia, 2 (84), 29-33. (in Russian)
- [6] Černecký, J., Pivarčiová, E. (2007). Possibilities and Prospects of Holography. Izhevsk, Russia: Izhevsk State Technical University. ISBN 978-5-7526-0303-7.
- [7] Mayinger, F., Panknin, W. (1974). Holography in heat and mass transfer. In Proceedings of the 5th International Heat Transfer Conference. Tokyo, Japan: Society of Heat Transfer of Japan, 28-43.
- [8] Tauscher, R. (1999). Holographic interferometry in heat and mass transfer. http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.602.7223.
- [9] Binu, P.T., Rajendran, K.V., Pillai, S.A. (2006). Wholefield NDT of porous materials using digital holography. In National Seminar on Non-Destructive Evaluation. Indian Society for Non-Destructive Testing, 229-234.
- [10] Pavelek, M., Janotková, E., Štětina, J. (2007). Visualisation and Optical Measuremet Methods. Brno, Czech Republic: University of Technolgy in Brno. (in Czech)
- [11] Herman, C. (2011). Quantitative visualization of heat transfer in oscillatory and pulsatile flows. In Heat Transfer : Theoretical Analysis, Experimental Investigations and Industrial Systems. IntechOpen, 353-378. DOI: 10.5772/14460.10.5772/14460
- [12] Lédl, V., Vít, T., Psota, P., Doleček, R. (2011). Holografic interferometry used for measurement of temperature field in fluid. International Journal of Physical and Mathematical Sciences, 5 (11), 1746-1749. DOI: 10.5281/zenodo.1061908.10.5281/zenodo.1061908
- [13] Haridas, D., Sobhan, C.B. (2013). Measurement of convective heat transfer from a vertical flat plate using Mach-Zehnder interferometer with wedge fringe setting. International Journal of Mechanical and Mechatronics Engineering, 7 (12), 2385-2390. DOI: 10.5281/zenodo.1089066.10.5281/zenodo.1089066
- [14] Dančová, P., Vít, T., Lédl, V., Trávníček, Z., Doleček, R. (2013). Holographic interferometry as a tool for visualization of temperature fields in air. Engineering Mechanics, 20 (3/4), 205-212.
- [15] Dhote, Y., Thombre, S.B. (2013). A review on natural convection heat transfer through inclined parallel plates. International Journal of Advanced Research in Engineering and Technology, 4 (7), 170-175.
- [16] Cernecky, J., Koniar, J., Brodnianska, Z. (2014). The effect of heat transfer area roughness on heat transfer enhancement by forced convection. Journal of Heat Transfer, 136 (4), 041901. DOI: 10.1115/1.4025920.
- [17] Verma, S., Joshi, Y.M., Muralidhar, K. (2015). Optical interferometers: Principles and applications in transport phenomena. https://nptel.ac.in/courses/112104039/sup_4/article4.pdf.
- [18] Zhu, J.R., Cheng, X.M., Dai, J.M., Li, Y.Y. (2015). Temperature measurement of an inclined cylinder using optical interferometry. In International Conference on Artificial Intelligence and Industrial Engineering. Phuket, Thailand, 82-84. DOI: 10.2991/aiie-15.2015.23.10.2991/aiie-15.2015.23
- [19] Anooplal, B., Binoy, B. (2017). Investigation on heat transfer properties of Nano-fluids using Michelson interferometry. International Advanced Research Journal in Science, Engineering and Technology, 4 (6), 18-22. DOI: 10.17148/IARJSET.
- [20] Černecký, J., Koniar, J., Brodnianská, Z. (2011). Optimisation of Heat Exchangers by Using Experimental Methods and Physical Modeling. Zvolen, Slovakia. (in Slovak)
- [21] Harťanský, R., Smieško, V., Rafaj, M. (2017). Modifying and accelerating the method of moment’s calculation. Computing and Informatics, 36 (3), 664-682. DOI: 10.4149/cai_2017_3_664.10.4149/cai_2017_3_664
- [22] Stejskal, T., Kelemenová, T., Dovica, M., Demeč, P., Štofa, M. (2016). Information contents of a signal at repeated positioning measurements of the coordinate measuring machine (CMM) by laser interferometer. Measurement Science Review, 16 (5), 273-279. DOI: 10.1515/msr-2016-0034.10.1515/msr-2016-0034
- [23] Sysoev, E., Kosolobov, S., Kulikov, R., Latyshev, A., Sitnikov, S., Vykhristyuk, I. (2017). Interferometric surface relief measurements with subnano/picometer height resolution. Measurement Science Review, 17 (5), 213-218. DOI: 10.1515/msr-2017-0025.10.1515/msr-2017-0025