Positioner and the Procedure for Measuring Spatial Characteristics

Rudolf Drga; Dagmar Janáčová; Rudolf Palenčár; Stanislav Ďuriš

doi:10.2478/msr-2019-0002

.blurhash-client-img { display: none !important; }

Positioner and the Procedure for Measuring Spatial Characteristics

Measurement Science Review

Volume 19 (2019): Issue 1 (February 2019)

By: Rudolf Drga, Dagmar Janáčová, Rudolf Palenčár and Stanislav Ďuriš

Open Access

|Feb 2019

Abstract

The present work focuses on the solution of management of measuring spatial characteristics of security detectors using a positioner, a precision manipulator. It deals with program management software in LabView. Graphical programming with subroutines, which are described as virtual instruments, is used. There are published results of measurements of the spatial characteristics of the PIR detector, where it is preferably used as the measuring station.

References

[1] Vincent, J.D. (1990). Fundamentals of Infrared Detector Operation and TestingFundamentals of Infrared Detector Operation and Testing. Wiley-Interscience.
Search in Google Scholar Back to article
[2] Knoll, G.F. (2000). Radiation Detection and Measurement. Wiley.
Search in Google Scholar Back to article
[3] Saleh, B.E.A., Teich, M.C. (2007). Fundamentals of Photonics. Wiley-Interscience.
Search in Google Scholar Back to article
[4] Czech Office for Standards, Metrology and Testing. (2011). Alarm systems - CCTV surveillance systems for use in security applications Part 7: Application guidelines. CSN EN 50132.
Search in Google Scholar Back to article
[5] Czech Office for Standards, Metrology and Testing. (2002). Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors. CSN EN 54-10.
Search in Google Scholar Back to article
[6] Tyco Fire & Security. (2008). Flame detector S300, datasheet.
Search in Google Scholar Back to article
[7] Tyco Fire & Security. (2008). Flame detector S200, datasheet.
Search in Google Scholar Back to article
[8] Jha, A.R. (2000). Infrared Technology. Wiley-Interscience.
Search in Google Scholar Back to article
[9] Czech Office for Standards, Metrology and Testing. (2008). Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors. CSN 50131-2-2.
Search in Google Scholar Back to article
[10] Hotz, C. (1979). Přenos tepla zářením. Prague, Czech Republic: SNTL. (in Czech)
Search in Google Scholar Back to article
[11] Kolomazník, K. (1990). Modelování zpracovatelských procesů. Brno, Czech Republic: University of Technology in Brno. (in Czech)
Search in Google Scholar Back to article
[12] Feriančik, M., Líška, O., More, M. (2013). Navigation of industrial manipulator based on computer vision. Transfer inovácií, 28, 140-142.
Search in Google Scholar Back to article
[13] Drga, R., Janáčová, D. (2012). PIR detector measurement using thermal cameras. Strojárstvo extra, 2012, 281-286.
Search in Google Scholar Back to article
[14] Makovník, R., Líška, O. (2007). Contribution to experimental identification and simulation problems of dynamic systems. Ovidius University Annual Scientific Journal, 9 (1).
Search in Google Scholar Back to article
[15] Kastek, M., Madura, H., Morawski, M., Piatkowski, T., Powiada, E., Polakowski, H. (2007). Test bed for measurement of angular parameters of passive infrared sensors. Infrared Physics and Technology, 49 (3), 198-201.10.1016/j.infrared.2006.06.003
Search in Google Scholar Back to article
[16] Rafique, F., Siddiqui, N. (2013). Passive IR field gradient detection of thermal objects in active Fresnel zones. Infrared Physics and Technology, 60, 145-154.10.1016/j.infrared.2013.04.007
Search in Google Scholar Back to article
[17] Úředníček, Z., Drga, R. (2016). Measuring robot kinematics description and its workspace. MATEC Web of Conferences, 76, 02027.10.1051/matecconf/20167602027
Search in Google Scholar Back to article
[18] Drga, R. (2012). Nepřesnosti při měření teploty zdroje IR záření termovizní kamerou. In Automatizácia a riadenie v teórii a praxi. Košice, Slovak Republic: Technical University of Košice, 19.1-19.8. (in Czech)
Search in Google Scholar Back to article
[19] Hart, J., Hartová, V., Bradna, J. (2016). Intrusion and hold-up alarm systems and their reliability glass break detection. In Proceeding of 6th International Conference on Trends in Agricultural Engineering 2016. Prague, Czech Republic: Czech University of Life Sciences, 171-174.
Search in Google Scholar Back to article
[20] Miyazaki, T., Shinohara, F., Horiuchi, T., Ohira, Y., Yamamoto, H., Nishi, M. (2016). Health checking system using wearable health devise and PIR sensors. In Proceedings of the 2nd International Conference on Sensors and Electronic Instrumentation Advances. IFSA Publishing, 85-86.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/msr-2019-0002 | Journal eISSN: 1335-8871

Journal RSS Feed

Language: English

Page range: 9 - 13

Submitted on: May 25, 2018

Accepted on: Dec 20, 2018

Published on: Feb 23, 2019

Published by: Slovak Academy of Sciences, Institute of Measurement Science

In partnership with: Paradigm Publishing Services

Publication frequency: Volume open

Keywords:

Magnetic measurement,

imaging,

magnetic susceptibility,

calculation,

microwave frequencies

Related subjects:

Engineering,

Electrical engineering,

Control engineering, metrology and testing

© 2019 Rudolf Drga, Dagmar Janáčová, Rudolf Palenčár, Stanislav Ďuriš, published by Slovak Academy of Sciences, Institute of Measurement Science
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 19 (2019): Issue 1 (February 2019)