References
- [1] Garber, E., Traino, A., Kozhevnikova, I. (2009). Novel mathematical models for cold-rolling process. In Flatrolled Steel Processes: Advanced Technologies. CRC Press, 179-191.
- [2] Bidulská, J., Kvačkaj, T., Bodák, V., Bidulský, R. (2007). The microgeometry parameters of uncoated and zinc-coated cold rolled steel strips. Journal of Metals, Materials and Minerals, 17 (2), 1-7.
- [3] Pittner, J., Simaan, A.M. (2011). Tandem Cold Metal Rolling Mill Control: Using Practical Advanced Methods. Springer.
- [4] Szarková, V., Valíček, J., Vlado, M., Harničárová, M., Rokosz, K., Lupták, M., Samardžić, I., Kozak, D., Hloch, S. (2013). Influence of longitudinal cold rolling on the surface topography of low carbon structural steel. Technical Gazette, 20 (4), 705-709.
- [5] Valíček, J., Müllerová, J., Szarková, V., Rokosz, K., Łukianowicz, C., Kozak, D., Koštial, P., Harničárová, M. (2013). A new procedure for the determination of the main technology parameters of rolling mills. In Design and Analysis of Materials and Engineering Structures. Springer, 15-25.
- [6] Valíček, J., Držík, M., Hryniewicz, T., Harničárová, M., Rokosz, K., Kušnerová, M., Barčová, K., Bražina, D. (2012). Non-contact method for surface roughness measurement after machining. Measurement Science Review, 12 (5), 184-188.
- [7] Whitehouse, J.D. (2003). Handbook of Surface and Nanometrology, 2nd Edition. CRC Press.
- [8] Oduguwa, V., Roy, R. (2006). A review of rolling system design optimisation. International Journal of Machine Tools and Manufacture, 46 (7-8), 912-928.
- [9] Kušnerová, M., Valíček, J., Harničárová, M., Hryniewicz, T., Rokosz, K., Palková, Z., Václavík, V., Řepka, M., Bendová, M. (2013). A proposal for simplifying the method of evaluation of uncertainties in measurement results. Measurement Science Review, 13 (1), 1-6.
- [10] Kvačkaj, T., Mamuzić, I. (2006). Development of bake hardening effect by plastic deformation and annealing conditions. Metalurgija, 45 (1), 51-55.
- [11] Spišák, E., Slota, J., Majerníková, J., Kaščák, Ľ., Malega, P. (2012). Inhomogeneous plastic deformation of tinplates under uniaxial stress state. Chemicke listy, 106 (Symposia), 537-540.
- [12] Vlado, M., Bidulský, R., Gulová, L., Machová, K., Bidulská, J., Valíček, J., Sas, J. (2011). The production of cracks evolution in continuously cast steel slab. High Temperature Materials and Processes, 30 (1-2), 105-111.
- [13] Lenard, G.J. (2007). Primer on Flat Rolling, 1st Edition. Elsevier.