A Model Parameter Extraction Method for Dielectric Barrier Discharge Ozone Chamber using Differential Evolution

Amjad, M.; Salam, Z.; Ishaque, K.

doi:10.2478/msr-2014-0011

Abstract

In order to design an efficient resonant power supply for ozone gas generator, it is necessary to accurately determine the parameters of the ozone chamber. In the conventional method, the information from Lissajous plot is used to estimate the values of these parameters. However, the experimental setup for this purpose can only predict the parameters at one operating frequency and there is no guarantee that it results in the highest ozone gas yield. This paper proposes a new approach to determine the parameters using a search and optimization technique known as Differential Evolution (DE). The desired objective function of DE is set at the resonance condition and the chamber parameter values can be searched regardless of experimental constraints. The chamber parameters obtained from the DE technique are validated by experiment.

References

[1] Guzel-Seydim, Z.B., Greene, A.K., Seydim, A.C. (2004). Use of ozone in the food industry. Lebensmittel-Wissenschaft und-Technologie, 37 (4), 453-460.10.1016/j.lwt.2003.10.014
Search in Google Scholar
[2] Kogelschatz, U. (2002). Filamentary, patterned, and diffuse barrier discharges. IEEE Transactions on Plasma Science, 30 (4), 1400-1408.10.1109/TPS.2002.804201
Search in Google Scholar
[3] Amjad, M., Salam, Z. (2014). Analysis, design, and implementation of multiple parallel ozone chambers for high flow rate. IEEE Transactions on Industrial Electronics, 61 (2), 753-765.10.1109/TIE.2013.2251733
Search in Google Scholar
[4] Facta, M., Salam, Z., Buntat, Z. (2009). The development of ozone generation with low power consumption. In Innovative Technologies in Intelligent Systems and Industrial Applications, 25-26 July 2009. IEEE, 440-445.10.1109/CITISIA.2009.5224168
Search in Google Scholar
[5] Koudriavtsev, O., Shengpei, W., Konishi, Y., Nakaoka, M.A. (2002). Novel pulse-density-modulated high-frequency inverter for silent-discharge-type ozonizer. IEEE Transactions on Industry Applications, 38 (2), 369-378.10.1109/28.993158
Search in Google Scholar
[6] Oleg, K., Sergey, M., Nakaoka, M. (2002). Frequency characteristics analysis and switching power supply designing for dielectric barrier discharge type load. In VIII IEEE International Power Electronics Congress, 20-24 October 2002. IEEE, 222-227.10.1109/CIEP.2002.1216663
Search in Google Scholar
[7] Alonso, J.M., Valdes, M., Calleja, A.J., Ribas, J., Losada, J. (2003). High frequency testing and modeling of silent discharge ozone generators. Ozone: Science & Engineering: The Journal of the International Ozone Association, 25 (5), 363-376.10.1080/01919510390481685
Search in Google Scholar
[8] Ponce, M., Aguilar, J., Fernandez, J., Beutelspacher, E., Calderon, J.M., Cortes, C. (2004). Linear and non linear models for ozone generators. In 9th IEEE International Power Electronics Congress, 17-22 October 2004. IEEE, 251-256.10.1109/CIEP.2004.1437593
Search in Google Scholar
[9] Ponce-Silva, M., Aguilar-Ramirez, J., Beutelspacher, E., Calderon, J.M., Cortes, C. (2007). Single-switch power supply based on the class E shunt amplifier for ozone generators. In Power Electronics Specialists Conference, 17-21 June 2007. IEEE, 1380-1385.10.1109/PESC.2007.4342196
Search in Google Scholar
[10] Haverkamp, R.G., Miller, B.B., Free, K.W. (2002). Ozone production in a high frequency dielectric barrier discharge generator. Ozone: Science & Engineering: The Journal of the International Ozone Association, 24 (5), 321-328.10.1080/01919510208901623
Search in Google Scholar
[11] Olivares, V.H., Ponce-Silva, M., Osorio, R., Juarez, M. (2007). DBD modeling as a function of waveforms slope. In Power Electronics Specialists Conference, 17-21 June 2007. IEEE, 1417-1422.10.1109/PESC.2007.4342202
Search in Google Scholar
[12] Guofeng, J., Wei, Z., Zhengwei, Y., Zhiyong, H., Yuanjia, S., Dongdong, W., Gan, T. (2012). Image segmentation of thermal waving inspection based on particle swarm optimization fuzzy clustering algorithm. Measurement Science Review, 6 (12), 296-301.10.2478/v10048-012-0041-6
Search in Google Scholar
[13] Meo, A., Profumo, L., Rossi, A., Lanzetta, M. (2013). Optimum dataset size and search space for minimum zone roundness evaluation by genetic algorithm. Measurement Science Review, 13 (3), 100-107.10.2478/msr-2013-0018
Search in Google Scholar
[14] Hasan, M., Reaz, M. (2012). Hardware prototyping of neural network based fetal electrocardiogram extraction. Measurement Science Review, 12 (2), 52-55.10.2478/v10048-012-0007-8
Search in Google Scholar
[15] Price, K.V., Storn, R.M., Lampinen, J.A. (2005). Differential Evolution : A Practical Approach to Global Optimization. Springer.
Search in Google Scholar
[16] Ishaque, K., Salam, Z., Taheri, H., Shamsudin, A. (2011). A critical evaluation of EA computational methods for Photovoltaic cell parameter extraction based on two diode model. Solar Energy, 85 (9), 1768-1779.10.1016/j.solener.2011.04.015
Search in Google Scholar
[17] Ordiz, C., Alonso, J.M.J., Costa, M.A.D., Ribas, J., Calleja, A.J. (2008). Development of a high-voltage closed-loop power supply for ozone generation. In Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition, 24-28 February 2008. IEEE, 1861-1867.10.1109/APEC.2008.4522980
Search in Google Scholar
[18] Gamperle, R., Muller, S.D., Koumoutsakos, P. (2002). A parameter study for differential evolution. In WSEAS International Conference on Advances in Intelligent Systems, Fuzzy Systems, Evolutionary Computation. WSEAS, 293-298.
Search in Google Scholar
[19] Kinnares, V., Hothongkham, P. (2010). Circuit analysis and modeling of a phase-shifted pulsewidth modulation full-bridge-inverter-fed ozone generator with constant applied electrode voltage. IEEE Transactions on Power Electronics, 25 (7), 1739- 1752.10.1109/TPEL.2010.2042075
Search in Google Scholar
[20] Mclyman, C.W.T. (1988). Transformer and Inductor Design Handbook. Third Edition. Marcel Dekker Publishing.
Search in Google Scholar
[21] Amjad, M., Salam, Z., Facta, M., Ishaque, K. (2012). A simple and effective method to estimate the model parameters of dielectric barrier discharge ozone chamber. IEEE Transactions on Instrumentation and Measurement, 61 (6), 1676-1683.10.1109/TIM.2012.2188351
Search in Google Scholar
[22] Hothongkham, P., Kinnares, V. (2010). Measurement of an ozone generator using a phase-shifted PWM full bridge inverter. In International Power Electronics Conference, 21-24 June 2010. IEEE, 1552-1559.10.1109/IPEC.2010.5544533
Search in Google Scholar

A Model Parameter Extraction Method for Dielectric Barrier Discharge Ozone Chamber using Differential Evolution

Abstract

Paradigm

My account