Portable Light Pen 3D Vision Coordinate Measuring System- Probe Tip Center Calibration
Open Access
|Aug 2013References
- [1] Bosch, J.A. (1995).. New York: Marcel Dekker Inc., 15-42.
- [2] Estler, W.T., Edmundson, K.L., Peggs, G.N., Parker, D.H. (2002). Large-scale metrology - an update., 51 (2), 587-609.
- [3] Milroy, M.J., Weir, D.J., Bradley, C., Vickers, G.W. (1996). Reverse engineering employing a 3D laser scanner: A case study., 12 (2), 111-121.
- [4] Chen, J., Wu, X.J., Wang, M.Y., Li, X.F. (2012). 3D shape modeling using a self-developed hand-held 3D laser scanner and an efficient HT-ICP point cloud registration algorithm., 46, 414-423.
- [5] Vincze, M., Prenninger, J.P., Gander, H. (1994). A laser tracking system to measure position and orientation of robot end effectors under motion., 13 (4), 305-314.
- [6] Mayer, J.R.R., Parker, G.A. (1994). A portable instrument for 3-D dynamic robot measurements using triangulation and laser tracking., 10 (4), 504-516.
- [7] Valíček, J. et al. (2012). Non-contact method for surface roughness measurement after machining., 12 (5), 184-188.
- [8] Łukianowicz, C., Karpiński, T. (2001). Optical system for measurement of surface form and roughness., 1 (1), 151-154.
- [9] Xie, Z.X., Zhang, Z.W., Jin, M. (2006). Development of a multi-view laser scanning sensor for reverse engineering., 17 (8), 2319-2327.
- [10] Pettersen, A.D., Rotvold, O., Rotvold, Y. (2000).U.S. Patent No. 6,166,809. Washington, D.C.: U.S. Patent and Trademark Office.
- [11] Liu, S.G., Huang, F.S., Peng, K. (2005). The modeling of portable 3D vision coordinate measuring system. In, 835-842.
- [12] Huang, F.S., Qian, H.F. (2009). The model and its solution’s uniqueness of a portable 3D vision coordinate measuring system. In, 2-6 November 2009. IEEE, 1-6.
- [13] Li, J.J., Zhao, H., Jiang, T., Zhou, X. (2008). Development of a 3D high-precise positioning system based on a planar target and two CCD cameras. InSpringer, 475-484.
- [14] Zhang, P.W., Zhang, Z.Q., Zhang, Y.F. (2008). The research for a system of binocular stereo vision based on the near-infrared imaging characteristics of blackand- white CCD. In, 68351G-1-10.
- [15] Mochida, D., Daisaku, M. (2012).U.S. Patent No. 8,120,844. Washington, D.C.: U.S. Patent and Trademark Office.
- [16] Tsai, R.Y. (1987). A versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV camera and lenses., 3 (4), 323-344.
- [17] Zhang, Z.Y. (2000). A Flexible new technique for camera calibration., 22 (11), 1330-1334.
- [18] Liu, S.G., Li, P., Na, Y.L. (2002). Evaluation of the form error of ellipse based on least square method., 23 (4), 245-247.
- [19] Faugeras, O. (1993).. The MIT Press, 34-51.
- [20] Yuan J.S.-C. (1989). A general photogrammetric method for determining object position and orientation., 5 (2), 129-142.
DOI: https://doi.org/10.2478/msr-2013-0030 | Journal eISSN: 1335-8871
Language: English
Page range: 194 - 199
Published on: Aug 24, 2013
Published by: Slovak Academy of Sciences, Institute of Measurement Science
In partnership with: Paradigm Publishing Services
Publication frequency: Volume open
Keywords:
Related subjects:
© 2013 Shugui Liu, Hongling Zhang, Yinghua Dong, Shaliang Tang, Zhenzhu Jiang, published by Slovak Academy of Sciences, Institute of Measurement Science
This work is licensed under the Creative Commons License.