Setup for Triggering Force Testing of Touch Probes for CNC Machine Tools and CMMs

A. Wozniak; M. Byszewski; M. Jankowski

doi:10.2478/msr-2013-0004

.blurhash-client-img { display: none !important; }

Setup for Triggering Force Testing of Touch Probes for CNC Machine Tools and CMMs

Measurement Science Review

Volume 13 (2013): Issue 1 (February 2013)

By: A. Wozniak, M. Byszewski and M. Jankowski

Open Access

|Feb 2013

Abstract

Touch-trigger probes are commonly used both in coordinate measuring machines (CMM) and in computer numerical control (CNC) machine tools. In both cases accuracy of measurement of the overall system and probing unit are closely interrelated. Key parameters of the probes are repeatability and pre-travel variation dependent on adjustable stylus force. To enable testing of the triggering force of the probes, the new setup was developed. The principle of the method and set-up is presented and its validity is experimentally confirmed.

References

[1] Cauchick-Miguel, P., King, T., Abackerli, A. (1998). A review on methods for probe performance verification. Measurement, 23 (1), 15-33.
Search in Google Scholar
[2] Chan, F.M.M., Davis, E.J., King, T.G., Stout, K.J. (1997). Some performance characteristics of a multiaxis touch trigger probe. Measurement Science andTechnology, 8 (8), 837-848.10.1088/0957-0233/8/8/002
Search in Google Scholar
[3] Cauchick-Miguel, P.A., King, T., Abackerli, A.J. (2003). CMM touch trigger performance verification using a probe test apparatus. Journal of the BrazilianSociety of Mechanical Sciences and Engineering, 25 (2).
Search in Google Scholar
[4] Cauchick-Miguel, P.A., King, T.G. (1998). Factors which influence CMM touch trigger probe performance. International Journal of Machine Tools& Manufacture, 38 (4), 363-374.10.1016/S0890-6955(97)00054-0
Search in Google Scholar
[5] Dobosz, M., Woźniak, A. (2005). CMM touch trigger probes testing using a reference axis. PrecisionEngineering, 29 (3), 281-289.10.1016/j.precisioneng.2004.11.008
Search in Google Scholar
[6] Salah, H.R.A. (2010). Probing system characteristics in coordinate metrology. Measurement ScienceReview, 10 (4), 120-129.
Search in Google Scholar
[7] Cho, M.W., Seo, T.I. (2002). Machining error compensation using radial basis function network based on CAD/CAM/CAI integration concept. International Journal of Production Research, 40 (9), 2159-2174.10.1080/00207540210124057
Search in Google Scholar
[8] Cho, M.W., Seo, T.I. (2002). Inspection planning strategy for the on-machine measurement process based on CAD/CAM/CAI integration. InternationalJournal of Advanced Manufacturing Technology, 19 (8), 607-617.10.1007/s001700200066
Search in Google Scholar
[9] Cho, M.W., Seo, T.I., Kwon, H.D. (2003). Integrated error compensation method using OMM system for profile milling operation. Journal of MaterialsProcessing Technology, 136 (1-3), 88-99.10.1016/S0924-0136(02)00943-3
Search in Google Scholar
[10] Choi, J.P., Min, B.K., Lee, S.J. (2004). Reduction of machining errors of a three-axis machine tool by on machine measurement and error compensation system. Journal of Materials Processing Technology, 155-156 (1-3), 2056-2064.10.1016/j.jmatprotec.2004.04.402
Search in Google Scholar
[11] Zeleny, J., Janda, M. (2009). Automatic on-machine measurement of complex parts. Modern MachineryScience Journal, 2 (1), 92-95.10.17973/MMSJ.2009_03_20090307
Search in Google Scholar
[12] Estler, W.T., Phillips, S.D., Borchardt, B., Hopp, T., Witzgall, C., Levenson, M., Eberhardt, K., McClain, M., Shen, Y., Zhang, X. (1996). Error compensation for CMM touch trigger probes. Precision Engineering, 19 (2-3), 84-96.10.1016/S0141-6359(96)00040-2
Search in Google Scholar
[13] Mayer, J.R.R., Ghazzar, A., Rossy, O. (1996). 3D characterisation, modelling and compensation of the pre-travel of a kinematic touch trigger probe. Measurement, 19 (2), 83-94.
Search in Google Scholar
[14] Aston, R.A.E., Davis, J., Stout, K.J. (1997). Forced touch-down: A customer's further examination of a touch trigger probe. International Journal of MachineTools & Manufacture, 37 (10), 1383-1392.10.1016/S0890-6955(97)00012-6
Search in Google Scholar
[15] Estler, W.T., Phillips, S.D., Borchardt, B., Hopp, T., Levenson, M., Eberhardt, K., McClain, M., Shen, Y., Zhang, X. (1997). Practical aspects of touch-trigger probe error compensation. Precision Engineering, 21 (1), 1-17.10.1016/S0141-6359(97)00062-7
Search in Google Scholar
[16] Shen, Y.-L., Zhang, X. (1997). Modelling of pretravel for touch trigger probes on indexable probe heads on coordinate measuring machines. International Journalof Advanced Manufacturing Technology, 13 (3), 206-213.10.1007/BF01305872
Search in Google Scholar
[17] Woźniak, A., Dobosz, M. (2003). Metrological feasibilities of CMM touch trigger probes. Part I: 3D theoretical model of probe pretravel. Measurement, 34 (4), 273-286.
Search in Google Scholar
[18] Woźniak, A. (2006). Simple method of 3D error compensation of triggering probes on coordinate measuring machine. Metrology and MeasurementSystems, 13 (3), 289-302.
Search in Google Scholar
[19] Woody, S.C., Smith, S.T. (2003). Resonance-based vector touch sensors. Precision Engineering, 27 (3), 221-233.10.1016/S0141-6359(02)00186-1
Search in Google Scholar
[20] Park, J.J., Kwon, K., Cho, N. (2006). Development of a coordinate measuring machine (CMM) touch probe using a multi-axis force sensor. Measurement Scienceand Technology, 17 (9), 2380-2386.10.1088/0957-0233/17/9/002
Search in Google Scholar
[21] Schwenke, H., Knapp, W., Haitjema, H., Weckenmann, A., Schmitt, R., Delbressine, F. (2008). Geometric error measurement and compensation of machines-An update. CIRP Annals - ManufacturingTechnology, 57 (2), 660-675.10.1016/j.cirp.2008.09.008
Search in Google Scholar
[22] Farooqui, S.A., Morse, E.P. (2007). Methods and artifacts for comparison of scanning CMM performance. Journal of Computing and InformationScience in Engineering, 7 (1), 72-80.10.1115/1.2709928
Search in Google Scholar
[23] Kosarevsky, S., Latypov V. (2010). Inertia compensation while scanning screw threads on coordinate measuring machines. Measurement ScienceReview, 10 (2), 68-71.10.2478/v10048-010-0007-5
Search in Google Scholar
[24] Hessling, J.P. (2008). Dynamic metrology-an approach to dynamic evaluation of linear timeinvariant measurement systems. Measurement Scienceand Technology, 19 (8), 084008.
Search in Google Scholar

Articles in this issue

DOI: https://doi.org/10.2478/msr-2013-0004 | Journal eISSN: 1335-8871

Journal RSS Feed

Language: English

Page range: 29 - 33

Published on: Feb 9, 2013

Published by: Slovak Academy of Sciences, Institute of Measurement Science

In partnership with: Paradigm Publishing Services

Publication frequency: Volume open

Keywords:

Triggering force,

touch-trigger probe,

coordinate measuring machines,

on-machine measurement

Related subjects:

Engineering,

Electrical engineering,

Control engineering, metrology and testing

© 2013 A. Wozniak, M. Byszewski, M. Jankowski, published by Slovak Academy of Sciences, Institute of Measurement Science
This work is licensed under the Creative Commons License.

Volume 13 (2013): Issue 1 (February 2013)