Have a personal or library account? Click to login
Recovery of Metals from Printed Circuit Boards By Means of Electrostatic Separation Cover

Recovery of Metals from Printed Circuit Boards By Means of Electrostatic Separation

Management Systems in Production Engineering
Volume 28 (2020): Issue 4 (December 2020)
By: Dawid Franke,  Tomasz Suponik,  Paweł M. Nuckowski,  Klaudiusz Gołombek and  Kamila Hyra  
Open Access
|Aug 2020

References

  1. [1] A. Cieśla, W. Kraszewski, M. Skowron, A. Surowiak, P. Syrek. “Wykorzystanie bębnowego separatora elektrodynamicznego do separacji odpadów elektronicznych.” Mineral resources management, vol. 32(1), pp. 155-174, 2016.10.1515/gospo-2016-0007
    Search in Google ScholarBack to article
  2. [2] A. Kumar, M. E. Holuszko, T. Janke. “Characterization of the non-metal fraction of the processed waste printed circuit boards.” Waste Management, vol. 75, pp. 94-102, 2018.10.1016/j.wasman.2018.02.01029449113
    Search in Google ScholarBack to article
  3. [3] A. Tuncuk, V. Stazi, A. Akcil, E.Y. Yazici, H. Deveci. “Aqueous metal recovery techniques from e-scrap: Hydrometallurgy in recycling.” Minerals Engineering, vol. 25, pp. 28-37, 2012.10.1016/j.mineng.2011.09.019
    Search in Google ScholarBack to article
  4. [4] B. Niu, Z. Chen, Z. Xu. “Recovery of Valuable Materials from Waste Tantalum Capacitors by Vacuum Pyrolysis Combined with Mechanical-Physical Separation.” ACS Sustainable Chemistry & Engineering, vo. 5(3), pp. 2639-2647, 2017.
    Search in Google ScholarBack to article
  5. [5] C.P. Baldé, V. Forti, V. Gray, R. Kuehr, P. Stegmann, 2017. “The Global E-waste Monitor–2017” United Nations University (UNU), International Telecommunication Union (ITU) & International Solid Waste Association (ISWA), Bonn/Geneva/Vienna.
    Search in Google ScholarBack to article
  6. [6] D. Franke, T. Suponik. “Metals recovery from e-scrap using gravity, electrostatic and magnetic separations.” IOP Conf. Series: Materials Science and Engineering 545(012016), 2019.10.1088/1757-899X/545/1/012016
    Search in Google ScholarBack to article
  7. [7] D. Shangguan (Ed.). “Lead-Free Solder Interconnect Reliability.” ASM International, Ohio, 2005.
    Search in Google ScholarBack to article
  8. [8] F. Burat, M. Özer. “Physical separation route for printed circuit boards.” Physicochemical Problems of Mineral Processing, vol. 54(2), pp. 554-566, 2018.
    Search in Google ScholarBack to article
  9. [9] J. Drzymała. “Mineral processing.” Ofic. Wyd. PWr, Wrocław, 2007.
    Search in Google ScholarBack to article
  10. [10] J. Guo, J. Guo, Z. Xu. “Recycling of non-metallic fractions from waste printed circuit boards: A review.” Journal of Hazardous materials, vol. 168(2-3), pp. 567-590, 2009.10.1016/j.jhazmat.2009.02.10419303702
    Search in Google ScholarBack to article
  11. [11] J. Kozłowski, W. Mikłasz, D. Lewandowski and H. Czyżyk, “Research on hazardous waste - management part I”, Archives of Waste Management and Environmental Protection, vol. 15, no. 2, pp. 69-76, 2013.
    Search in Google ScholarBack to article
  12. [12] J. LaDou. “Printed circuit board industry” International Journal of Hygiene and Environmental Health, vol.209 (3), pp. 211-219, 2006.10.1016/j.ijheh.2006.02.00116580876
    Search in Google ScholarBack to article
  13. [13] J. Li, Q. Zhou, Z. Xu, “Real-time monitoring system for improving corona electrostatic separation in the process of recovering waste printed circuit boards”, Waste Manag Res, vol. 32, no. 12, pp. 1227-1234, 2014.
    Search in Google ScholarBack to article
  14. [14] J. Li, Z. Xu, and Y. Zhou, “Application of corona discharge and electrostatic force to separate metals and nonmetals from crushed particles of waste printed circuit boards”, Journal of Electrostatics, vol. 65, no. 4, pp. 233-238, 2007.10.1016/j.elstat.2006.08.004
    Search in Google ScholarBack to article
  15. [15] J. Sohaili, S.K. Muniyandi, S.S. Mohamad. “A review on printed circuit board recycling technology.” Journal of Emerging Trends in Engineering and Applied Sciences, vol. 3(1), pp. 12-18, 2012.
    Search in Google ScholarBack to article
  16. [16] J. Wu, J. Li, and Z. Xu, “Electrostatic Separation for Recovering Metals and Nonmetals from Waste Printed Circuit Board: Problems and Improvements”, Environ. Sci. Technol., vol. 42, no. 14, pp. 5272-5276, 2008.
    Search in Google ScholarBack to article
  17. [17] J. Wu, J. Li, Z. Xu. “Electrostatic separation for multi-size granule of crushed printed circuit board waste using two-roll separator.” Journal of hazardous materials, vol. 159(2-3), pp. 230-23, 2008.10.1016/j.jhazmat.2008.02.01318346846
    Search in Google ScholarBack to article
  18. [18] L. Dascalescu, A. Tilmatine, F. Aman, M. Mihailescu. “Optimization of electrostatic separation Processes using response surface modeling.” IEEE Transactions on Industry Applications, vol. 40 (1), pp. 53-59, 2004.10.1109/TIA.2003.821812
    Search in Google ScholarBack to article
  19. [19] L. Hongzhou, L. Jia, G. Jie, X. Zhemning. “Movement behavior in electrostatic separation: Recycling of metal materials from waste printed circuit board.” Journal of Materials Processing Technology, vol. 197 (1-3), pp. 101-108, 2008.10.1016/j.jmatprotec.2007.06.004
    Search in Google ScholarBack to article
  20. [20] M. Tatariants, S. Yousef, R. Sidaraviciute, G. Denafas, R. Bendikiene. “Characterization of waste printed circuit boards recycled using a dissolution approach and ultrasonic treatment at low temperatures.” RSC Adv. 7, pp. 37729-37738, 2017.
    Search in Google ScholarBack to article
  21. [21] N. P. Cheremisinoff, P. N. Cheremisinoff. “Fiberglass Reinforced Plastics.” Noyes Publications, USA, 1995.10.1016/B978-081551389-6.50007-6
    Search in Google ScholarBack to article
  22. [22] R. G. Charles, P. Douglas, I. L. Hallin, I. Matthews, G. Liver-sage. “An investigation of trends in precious metal and copper content of RAM modules in WEEE: Implications for long term recycling potential.” Waste Management vol. 60, pp. 505-520, 2017.10.1016/j.wasman.2016.11.01827890594
    Search in Google ScholarBack to article
  23. [23] A. Elbakian, B. Sentyakov, P. Bozek, I. Kuric, K. Sentyakov. Automated separation of basalt fiber and other earth resources by the means of acoustic vibrations. Acta Montanistica Slovaca. Vol. 23, no. 3, pp. 271-281, 2018.
    Search in Google ScholarBack to article
  24. [24] S. Zhang, Y. Ding, B. Liu, D.A. Pan, C.C. Chang, A.A. Volinsky. “Challenges in legislation, recycling system and technical system of waste electrical and electronic equipment in China.” Waste management, vol. 45, pp. 361-373, 2015.10.1016/j.wasman.2015.05.01526059074
    Search in Google ScholarBack to article
  25. [25] V. Goodship, A. Stevels, J. Huisman, J. “Waste electrical and electronic equipment (WEEE) handbook”, Woodhead Publishing, 2019.
    Search in Google ScholarBack to article
  26. [26] V. Kumar, J. C. Lee, J. Jeong, M. K. Jha, B.S. Kim, R. Singh. “Recycling of printed circuit boards (PCB) to generate enriched rare metal concentrate.” Journal of Industrial and Engineering Chemistry, vol. 21, pp. 805-813, 2015.10.1016/j.jiec.2014.04.016
    Search in Google ScholarBack to article
  27. [27] W. Bizzo, R. Figueiredo, V. de Andrade. “Characterization of printed circuit boards for metal and energy recovery after milling and mechanical separation.” Materials, vol. 7(6), pp. 4555-4566, 2014.
    Search in Google ScholarBack to article
  28. [28] W. M. Haynes (Ed.). “CRC Handbook of Chemistry and Phisics”, CRC Press, 2017.10.1201/9781315380476
    Search in Google ScholarBack to article
  29. [29] P. Bozek, Y. Nikitin, P. Bezak, G. Fedorko, M. Fabian. Increasing the production system productivity using inertial navigation. Manufacturing technology. Vol. 15, no. 3, online, pp. 274-278. 2015.10.21062/ujep/x.2015/a/1213-2489/MT/15/3/274
    Search in Google ScholarBack to article
  30. [30] R. Qiu et al., “Recovering full metallic resources from waste printed circuit boards: A refined review”, Journal of Cleaner Production, vol. 244, p. 118690, 2020.
    Search in Google ScholarBack to article
  31. [31] Y. Chen, G. Zhu, Y. Zhou, M. Wang, X. Jia, X. Zhu. “Reflow soldering method with gradient energy band generated by optical system.” Optics express, vol. 26(22), pp. 29103-29215, 2018.
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/mspe-2020-0031 | Journal eISSN: 2450-5781 | Journal ISSN: 2299-0461
Journal RSS Feed
Language: English
Page range: 213 - 219
Submitted on: Mar 1, 2020
Accepted on: Jul 1, 2020
Published on: Aug 17, 2020
Published by: STE Group sp. z.o.o.
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
electrostatic separation,
metals recovery,
PCB,
SEM,
XRD
Related subjects:
Business and economics,
Business management,
Management accounting, financial controlling, cost calculation, investment,
Engineering,
Mechanical engineering,
Production technology,
Tools and methods,
Process engineering and industrial engineering

© 2020 Dawid Franke, Tomasz Suponik, Paweł M. Nuckowski, Klaudiusz Gołombek, Kamila Hyra, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution 4.0 License.

Volume 28 (2020): Issue 4 (December 2020)Next article