References
- Abbas, H., Alanazi, M.A., Elsanadedy, H., Almusallam, T., Abadel, A., Al-Salloum, Y., Effect of tie spacing and GFRP rebar diameter on compression behavior of concrete columns, J. Build. Eng., 2023, 72: 106740
- Auman, H., Stratford, C., Palermo, A., An overview of research and applications of FRP in New Zealand reinforced concrete structures, Struct. Eng. Int., 2020, 30(2): 201–208
- Elsanadedy, H.M., Abbas, H., Al-Salloum, Y.A., Almusallam, T.H., Prediction of intermediate crack debonding strain of externally bonded FRP laminates in RC beams and one-way slabs, J. Compos. Constr., 2014, 18(5): 04014008
- Li, T., Liu, T., Jin, C., Huang, J., Application of phenolic-based BFRP rebars adapted to high temperature in beam strengthened by NSM technique, Struct. Eng. Int., 2025, 35(2): 276–285
- Rizkalla, S., Hassan, T., Effectiveness of FRP for strengthening concrete bridges, Struct. Eng. Int., 2002, 12(2): 89–95
- Parvizi, M., Investigation of bond behaviour between GFRP reinforcing bars and concrete containing seawater (Doctoral dissertation, Université d’Ottawa/University of Ottawa); 2019
- Henin, E., Tawadrous, R., Morcous, G., Effect of surface condition on the bond of basalt fiber-reinforcement polymer bars in concrete, Constr. Build. Mater., 2019, 226: 449–458
- ACI Committee 440, Guide for the design and construction of structural concrete reinforced with fiber-reinforced polymer bars (ACI 440.1R-15R), American Concrete Institute; 2015
- ACI Committee 440, Specification for carbon and glass fiber-reinforced polymer bar materials for concrete reinforcement (ACI 440.6M-08M), ACI: Farmington Hills, Michigan, USA; 2018
- CSA (Canadian Standards Association), Design and construction of buildings components with fiber-reinforced polymers. CSA S806-12, Toronto, ON, Canada; 2012
- CSA (Canadian Standards Association), Canadian highway bridge design code. CSA-S6-S19, Rexdale, ON, Canada; 2014
- CSA (Canadian Standards Association), Annex E – Specification for fibre-reinforced polymers. S807:19. Toronto, ON, Canada; 2019
- Adhikari, S., Mechanical properties and flexural applications of basalt fiber reinforced polymer (BFRP) bars (Doctoral dissertation, University of Akron); 2009
- Wu, Z., Wang, X., Wu, G., Advancement of structural safety and sustainability with basalt fiber reinforced polymers, In Proceedings of the 6th International Conference on FRP Composites in Civil Engineering (CICE2012), Rome, Italy; 2012, June
- Vincent, P., Ahmed, E., Benmokrane, B., Characterization of basalt fiber-reinforced polymer (BFRP) reinforcing bars for concrete structures, In Proceedings of the 3rd Specialty Conference on Material Engineering & Applied Mechanics, Canadian Society of Civil Engineers, Montreal, Canada. May, Vol. 29; 2013, January
- Altalmas, A., El Refai, A., Abed, F., Bond degradation of basalt fiber-reinforced polymer (BFRP) bars exposed to accelerated aging conditions, Constr. Build. Mater., 2015, 81: 162–171
- Benmokrane, B., Elgabbas, F., Ahmed, E.A., Cousin, P., Characterization and comparative durability study of glass/vinylester, basalt/vinylester, and basalt/epoxy FRP bars, J. Compos. Constr., 2015, 19(6): 04015008
- Wang, H., Sun, X., Peng, G., Luo, Y., Ying, Q., Experimental study on bond behaviour between BFRP bar and engineered cementitious composite, Constr. Build. Mater., 2015, 95: 448–456
- Hassan, M., Benmokrane, B., ElSafty, A., Fam, A., Bond durability of basalt-fiber-reinforced-polymer (BFRP) bars embedded in concrete in aggressive environments, Composites, Part B, 2016, 106: 262–272
- Li, C., Gao, D., Wang, Y., Tang, J., Effect of high temperature on the bond performance between basalt fibre reinforced polymer (BFRP) bars and concrete, Constr. Build. Mater., 2017, 141: 44–51
- ISIS Canada, Reinforcing concrete structures with fibre reinforced polymers. Design manual no. 3. Sept. 2007, ISIS Canada Research Network; 2007
- Liu, H., Yang, J., Wang, X., Bond behavior between BFRP bar and recycled aggregate concrete reinforced with basalt fiber, Constr. Build. Mater., 2017, 135: 477–483
- Yi, Y., Wang, X., Liu, J., Liu, X., Yi, X., Chen, Z., et al., Effect of elevated temperature on tensile properties of thermoplastic FRP bars and thermoplastic FRP-concrete bond behavior, J. Build. Eng., 2025, 102: 112032
- Liang, K., Chen, L., Su, R.K.L., Bond behavior of basalt fiber-reinforced polymer bars (BFRP) embedded in ultra-high-performance concrete after elevated temperature exposure, Constr. Build. Mater., 2025, 481: 141531
- Prakash, R.S., Parthasarathi, N., Experimental and numerical study on FRP-rehabilitated RC beam-column joints at high temperature with artificial neural network, Sci. Rep., 2025, 15(1): 30016
- ACI 408 Committee, Bond and development of straight reinforcing bars in tension (ACI 408R-03), American Concrete Institute: Detroit, Michigan, US, 2003, p. 49
- ASTM A944, Standard test method for comparing bond strength of steel reinforcing bars to concrete using beam-end specimens, Annual book of ASTM standards; 2015
- ASTM C39/C39M-18, Standard test method for compressive strength of cylindrical concrete specimens, ASTM International: West Conshohocken, PA; 2018
- ASTM C496-17, Standard test method for splitting tensile strength of cylindrical concrete specimens, ASTM International: West Conshohocken, PA; 2017
- Taha, A., Alnahhal, W., Bond durability and service life prediction of BFRP bars to steel FRC under aggressive environmental conditions, Compos. Struct., 2021, 269: 114034
- Liu, Z., Liu, H., Xu, W., Liu, B., Zhong, Y., Geng, J., et al., Investigation of the bond properties between hybrid fiber-reinforced concrete and BFRP bars after exposure to high temperature, Mater. Constr., 2024, 74(353): e334–e334
- Heshmat, M., El-Shafie, H., Elgabbas, F., Investigate the bond performance of basalt FRP bars under the effect of severe conditions, Sci. Rep., 2025, 15(1): 20142
- Cosenza, E., Manfredi, G., Realfonzo, R., Behavior and modeling of bond of FRP rebars to concrete, J. Compos. Constr., 1997, 1(2): 40–51
- Comité Euro-International du Béton, CEB-FIP model code 1990: Design code, Thomas Telford Publishing; 1993
- fédération internationale du béton/International Federation for Structural Concrete (fib), fib model code for concrete structures 2010, Ernst & Sohn Publishing; 2013
- Huang, Z., Modelling the bond between concrete and reinforcing steel in a fire, Eng. Struct., 2010, 32(11): 3660–3669
- Lublóy, É., György, B.L., Temperature effects on bond between concrete and reinforcing steel, Zbornik radova Građevinskog fakulteta, Subotica, 2014, 30(26): 27–35
- Japan Society of Civil Engineers (JSCE), Recommendation for design and construction of concrete structures using continuous fibre reinforcing materials, Research Committee on Continuous Fiber Reinforcing Materials, Tokyo, Japan; 1997
- El-Gamal, S., Bond strength of glass fiber-reinforced polymer bars in concrete after exposure to elevated temperatures, J. Reinf. Plast. Compos., 2014, 33(23): 2151–2163
- Özkal, F.M., Polat, M., Yağan, M., Öztürk, M.O., Mechanical properties and bond strength degradation of GFRP and steel rebars at elevated temperatures, Constr. Build. Mater., 2018, 184: 45–57