Enhancement of high-performance concrete properties with crushed dune sand addition: A sustainable approach for desert regions
References
- Mechtcherine, V., Schröfl, C., Reichardt, M., Klemm, A.J., Khayat, K.H., Recommendations of RILEM TC 260-RSC for using superabsorbent polymers (SAP) for improving freeze–thaw resistance of cement-based materials, Mater. Struct., 2019, 52: 75. 10.1617/s11527-019-1375-4
- Surendran, H., Akhas, P.K., Properties of high-performance concrete incorporating toughened glass waste coarse aggregate: An experimental study, Structures, 2024, 60: 105897. 10.1016/j.istruc.2024.105897
- Al Saffar, D.M., Al Saad, A.J.K., Tayeh, B.A., Effect of internal curing on behavior of high performance concrete: An overview, Case Stud. Constr. Mater., 2019, 10: e00229. 10.1016/j.cscm.2019.e00229
- Silva, M.L., Prado, L.P., Félix, E.F., Sousa, A.M., Aquino, D.P., The influence of materials on the mechanical properties of ultra-high-performance concrete (UHPC): a literature review, Materials, 2024, 17: 1801. 10.3390/ma17081801
- Wu, H., Chen, G., Liu, C., Gao, J., Understanding the micro-macro properties of sustainable ultra-high performance concrete incorporating high-volume recycled brick powder as cement and silica fume replacement, Constr. Build. Mater., 2024, 448: 138170. 10.1016/j.conbuildmat.2024.138170
- Zhang, Y., Chang, J., Zhao, Q., Lam, W.L., Shen, P., Sun, Y., et al., Effect of dosage of silica fume on the macro-performance and micro/nanostructure of seawater Portland cement pastes prepared with an ultra-low water-to-binder ratio, Cem. Concr. Compos., 2022, 133: 104700. 10.1016/j.cemconcomp.2022.104700
- Wang, T., Fan, X., Gao, C., Strength, pore characteristics, and characterization of fly ash-slag-based geopolymer mortar modified with silica fume, Structures, 2024, 69: 107525. 10.1016/j.istruc.2024.107525
- Amin, M.N., Ahmad, A., Shahzada, K., Khan, K., Jalal, F.E., Qadir, M.G., Mechanical and microstructural performance of concrete containing high-volume of bagasse ash and silica fume, Sci. Rep., 2022, 12: 5719. 10.1038/s41598-022-08749-1
- Aivazyan, A.P., Monteiro, P.J., Kirchheim, A.P., Prinz, S., Mkrtchyan, V.P., Harutyunyan, V.S., Residual stress on ettringite crystals in mature Type K shrinkage-compensating cement pastes, Constr. Build. Mater., 2023, 401: 132892. 10.1016/j.conbuildmat.2023.132892
- Zhang, M., Zhu, X., Shi, J., Liu, B., He, Z., Liang, C., Utilization of desert sand in the production of sustainable cement-based materials: A critical review, Constr. Build. Mater., 2022, 327: 127014. 10.1016/j.conbuildmat.2022.127014
- Liu, H., Li, Q., Preparation of artificial aggregates from concrete slurry waste and waste brick masonry powder: CO2 uptake and performance evaluation, Constr. Build. Mater., 2023, 382: 131356. 10.1016/j.conbuildmat.2023.131356
- Reddy, Y.R., Nassar, A.H., Kangda, M.Z., Yashwanth, H.J., Khan, M.A., Asiri, A.N.M., et al., Symbiotic impact of carbon quantum dots on microstructural development and mechanical behaviour of cement mortars, Case Stud. Constr. Mater., 2024, 20: e03042. 10.1016/j.cscm.2024.e03042
- Vinothkumar, S., Pannem, R.M.R., The effect of temperature and sulphate attack on ternary blended self-compacting concrete, Mater. Today: Proc., 2023, 1: S2214785323030195. 10.1016/j.matpr.2023.05.387
- Kazmi, S.M.S., Munir, M.J., Wu, Y.F., Development of sustainable high-performance desert sand concrete: Engineering and environmental impacts of compression casting, Resources, Conserv. Recycling, 2025, 212: 108002. 10.1016/j.resconrec.2024.108002
- Hosseinnezhad, H., Sürmelioğlu, S., Çakır, Ö.A., Ramyar, K., A novel method for characterization of recycled concrete aggregates: Computerized microtomography, J. Build. Eng., 2023, 76: 107321. 10.1016/j.jobe.2023.107321
- Tayeh, B.A., Akeed, M.H., Qaidi, S., Bakar, B.H.A., Influence of sand grain size distribution and supplementary cementitious materials on the compressive strength of ultrahigh-performance concrete, Case Stud. Constr. Mater., 2022, 17: e01495. 10.1016/j.cscm.2022.e01495
- Yu, D., Ni, H., Wang, L., Wu, M., Yang, X., Nanoscale-confined precursor of CuFe2O4 mediated by hyperbranched polyamide as an unusual heterogeneous Fenton catalyst for efficient dye degradation, J. Clean. Prod., 2018, 186: 146–154. 10.1016/j.jclepro.2018.03.134
- Ahmed, S., Abed, F., Mannan, M.A., Compressive strength development of dune sand reactive powder concrete (RPC) under different curing conditions, IOP Conf. Ser.: Earth Environ. Sci., 2022, 1026: 012017. 10.1088/1755-1315/1026/1/012017
- Tiwari, Y., Nandi, S., Manivannan, R., Chatterjee, D., Mukherjee, M., Rajinikanth, V., Investigating the influence of various tool path trajectories on the anisotropic behaviour of bulk NiCrMo-3 alloy fabrication by WADED process, Mater. Charact., 2024, 209: 113742. 10.1016/j.matchar.2024.113742
- Caselles, L.D., Coumes, C.C.D, Antonucci, P., Rousselet, A., Mesbah, A., Montouillout, V., Chemical degradation of magnesium potassium phosphate cement pastes during leaching by demineralized water: Experimental investigation and modeling, Cem. Concr. Res., 2024, 178: 107456. 10.1016/j.cemconres.2024.107456
- Farahzadi, L., Bozorgmehr Nia, S., Shafei, B., Kioumarsi, M., Sustainability assessment of ultra-high performance concrete made with various supplementary cementitious materials, Clean. Mater., 2025, 15: 100301. 10.1016/j.clema.2025.100301
- Zandifaez, P., Shen, Z., Sorgenfrei, R., Li, Y., Dias-da-Costa, D., Zhou, H., Pathways to formulate lightweight and ultra-lightweight 3D printable cementitious composites, Constr. Build. Mater., 2024, 424: 135874. 10.1016/j.conbuildmat.2024.135874
- Sindhurashmi, B.M., Nayak, G., Adesh, N.D., Rao, V., Dubey, S.P., Incorporating sea sand into self-compacting concrete: a systematic review, Discov. Appl. Sci., 2024, 6: 194. 10.1007/s42452-024-05826-0
- Hamada, H.M., Abed, F., Al-Sadoon, Z.A., Elnassar, Z., Hassan, A., The use of treated desert sand in sustainable concrete: A mechanical and microstructure study, J. Build. Eng., 2023, 79: 107843. 10.1016/j.jobe.2023.107843
- Alhozaimy, A., Al-Negheimish, A., Alawad, O.A., Jaafar, M.S., Noorzaei, J., Binary and ternary effects of ground dune sand and blast furnace slag on the compressive strength of mortar, Cem. Concr. Compos., 2012, 34: 734–738. 10.1016/j.cemconcomp.2012.03.002
- Anisur Rahman, M., Use of silica fume in stabilizing cement-dune sand for highway materials, AJCE, 2017, 5: 41. 10.11648/j.ajce.20170501.16
- Xi, W., Li, Z., Zhou, Y., Li, G., Ji, F., Experimental study on mechanical properties of desert sand concrete under freeze–thaw cycles, Materials, 2025, 18: 1546. 10.3390/ma18071546
- Bawab, J., El-Hassan, H., El-Dieb, A., Khatib, J., Effect of Mix design parameters on the properties of cementitious composites incorporating volcanic ash and dune sand, Dev. Built Environ., 2023, 16: 100258. 10.1016/j.dibe.2023.100258
- Cheng, X., Hu, H., Li, Y., Long, G., Ma, K., Preparation and composite strengthening of desert sand artificial aggregates and their influence on concrete mechanical properties, J. Railw. Sci. Technol., 2025, S3050814225000093. 10.1016/j.jrst.2025.08.002
- Kog, Y.C., High-performance concrete made with dune sand, Mag. Concr. Res., 2020, 72: 1036–1046. 10.1680/jmacr.18.00073
- Pearlmutter, D., Freidin, C., Huberman, N., Alternative materials for desert buildings: a comparative life cycle energy analysis, Build. Res. & Inf., 2007, 35: 144–155. 10.1080/09613210600980309
- Campagiorni, L., Tonelli, M., Ridi, F., Synergistic effect of limestone and supplementary cementitious materials in ternary blended cements, Curr. Opin. Colloid Interface Sci., 2025, 75: 101885. 10.1016/j.cocis.2024.101885
- Puhan, S.B., A review of durability qualities for silica fume use in concrete, IRJMETS, 2025, 6: 3314. 10.56726/IRJMETS65582
- Nasr, M.S., Hasan, Z.A., Abed, M.K., Dhahir, M.K., Najim, W.N., Shubbar, A.A.F., et al., Utilization of high volume fraction of binary combinations of supplementary cementitious materials in the production of reactive powder concrete, Period. Polytech. Civ. Eng., 2020. 10.3311/PPci.16242
- Gomaa, A.M., Samy, K., Karam, M.O., Abd Elsatar, Y.A., Mohamed, M.Z., Elnemr, M.S., et al., Improving High-Performance Concrete (HPC) by integrating nano metakaolin and silica fume, Adv. Sci. Technol. J., 2025, 2: 1–3. 10.21608/astj.2025.397863.1081
- Arroudj, K., Zenati, A., Oudjit, M.N., Bali, A., Tagnit-Hamou, A., Reactivity of fine quartz in presence of silica fume and slag, Engineering, 2011, 3: 569–576. 10.4236/eng.2011.36067
- Allout, N., Douara, T.H., Guettala, S., Quéneudec, M., Combined effect of powdered dune sand and steam-curing using solar energy on concrete characteristics, Constr. Build. Mater., 2022, 322: 126474. 10.1016/j.conbuildmat.2022.126474
- Rabehi, R., Rabehi, M., Omrane, M., Physical-mechanical and fresh state properties of self-compacting concrete based on different types of gravel reinforced with steel fibers: Experimental study and modeling, Constr. Build. Mater., 2023, 390: 131758. 10.1016/j.conbuildmat.2023.131758
- Guettala, S., Mezghiche, B., Compressive strength and hydration with age of cement pastes containing dune sand powder, Constr. Build. Mater., 2011, 25: 1263–1269. 10.1016/j.conbuildmat.2010.09.026
DOI: https://doi.org/10.2478/msp-2025-0036 | Journal eISSN: 2083-134X (formerly 2083-124X) | Journal ISSN: 2083-1331
Language: English
Page range: 173 - 188
Submitted on: Jun 16, 2025
Accepted on: Oct 12, 2025
Published on: Nov 19, 2025
Published by: Wroclaw University of Science and Technology
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2025 Fatima Zahra Rennani, Said Zaouai, Abdelkadir Makani, Mohamed Rabehi, Rachid Rabehi, Amel Ali Alhussan, El-Sayed M. El-kenawy, published by Wroclaw University of Science and Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.