References
- Shariat, M., Shariati, M., Madadi, A., Wakil, K., Computational Lagrangian Multiplier Method by using for optimization and sensitivity analysis of rectangular reinforced concrete beams, Steel Compos. Struct., 2018, 29: 243–256
- Reynolds, C.E., Steedman, J.C., Threlfall, A.J., Reinforced concrete designer’s handbook, CRC Press, USA, 2007
- ACI 318M-14, Building code requirements for structural concrete (ACI 318M-14): an ACI Standard: Commentary on building code requirements for structural concrete (ACI 318M-14), American Concrete Institute, USA, 2015
- Saini, B., Sehgal, V.K., Gambhir, M.L., Genetically optimized artificial neural network based optimum design of singly and doubly reinforced concrete beams, Asian J. Civ. Eng., 2006, 7(6): 603–619
- Jabbar, A.M., Hasan, Q.A., Abdul-Husain, Z.A., A theoretical study to predict the flexural strength of singly and doubly reinforced ultra-high performance concrete beams, J. Eng. Sci. Technol. Rev., 2022, 15: 91–101
- Bhalchandra, S.A., Adsul, P.K., Cost optimization of doubly reinforced rectangular beam section, Int. J. Mod. Eng. Res., 2012, 2: 3939–3942
- Manjunath, H.R., Kavya, K.R., Rao, K., Prakash, M.R., Prabhakara, R., Analysis of flexural behaviour of singly and doubly reinforced high strength concrete beams using ANSYS, In Proceedings of International Conference on Advances in Architecture and Civil Engineering (AARCV 2012), 2012, p. 179
- Galeb, A.C., Optimum design of doubly reinforced concrete beams using simulated annealing, Int. J. Civ. Eng. Technol. (IJCIET), 2018, 9: 61–70
- Wight, J.K., Reinforced concrete: Mechanics and design, 8th ed., Prentice Hall, Upper Saddle River, NJ, 2022
- Tahwia, A.M., Noshi, A., Abdellatief, M., Matthana, M.H., Experimental investigation of rubberized concrete slab-on-grade containing tire-recycled steel fibers, Innovative Infrastruct. Solut., 2024, 9: 46
- Handousa, A.M., Abdellatief, M., Salem, F.A., Mahmoud, N., Ghannam, M., Experimental and analytical study on axial behaviour of square corrugated concrete filled single and double skin tube stub columns, Sci. Rep., 2025, 15: 2167
- Eurocode 2: Design of concrete structures–part 1, Eurocode 2: Design of concrete structures-part 1–1: General rules and rules for buildings, Eur. Comm. Standard. Bruss., 2004, 668: 668
- CSA, Design of concrete structures, A23.3-04, Canadian Standards Association, Canada, 2004
- SBC, The Saudi Building Code for concrete structures and commentary, The Saudi Building Code National Committee (SBCNC), Riyadh, KSA, 2018
- ECP (Egyptian Code of Practice), The Egyptian Code for the Design and Construction of Concrete Structures, Housing and Building National Research Center, Giza, Egypt, 2020
- Hassoun, M.N., Al-Manaseer, A., Structural concrete: theory and design, John Wiley & Sons, USA, 2020
- Darwin, D., Dolan, C.W., Nilson, A.H., Design of concrete structures, McGraw-Hill Education, New York, NY, USA, 2016
- Ghoneim, M., EI-Mihilmy, M., Design of reinforced concrete structures, 2nd ed., Cairo University, Giza, Egypt, 2008
- Bhatt, P., MacGinley, T., Choo, B., Reinforced concrete design to Eurocodes, CRC Press, USA, 2014
- Toniolo, G., Di Prisco, M., Reinforced concrete design to eurocode 2, Springer, Switzerland, 2017
- Issa, M.S., El-Abbasy, A.A., Examples oriented reinforced concrete text book according to ACI318, Dar Elmaarefa, Cairo, Egypt, 2019
- Al Hazmi, H.S.J., El-Abbasy, A.A., Abou Elmal, H.S., Applying Saudi Building Code (SBC 304) in teaching reinforced concrete courses in Jazan University, International Conference on Engineering Education (ICEE), Madinah, Kingdom of Saudi Arabia, 2011
- Nirusha, D.S., Prasad, R., Prediction of percentage of steel for singly and doubly reinforced beam sections using artificial neural network, Glob. J. Eng. Appl. Sci., 2011, 1: 127–129
- Yousif, S.T., ALsaffar, I.S., Ahmed, S.M., Optimum design of singly and doubly reinforced concrete rectangular beam sections: Artificial neural networks application, Iraqi J. Civ. Eng., 2010, 6: 1–19
-
[25]
Panjehpour, P., Sorooshian, S., Deepak, T.J., The threshold for under-reinforced concrete sections proposed by ACI 318, EC 2 and BS 8110, Civ. Eng. Archit., 2021, 9: 1754–1758. 10.13189/cea.2021.090609
Panjehpour P. Sorooshian S. Deepak T.J. The threshold for under-reinforced concrete sections proposed by ACI 318, EC 2 and BS 8110 Civ. Eng. Archit. 2021 9 1754 1758 10.13189/cea.2021.090609
- El-Abbasy, A.A., Integrated interaction diagrams for sections subjected to axial force and bending moment according to the American Concrete Institute and the Saudi Building Code, Arab. J. Sci. Eng., 2021, 46: 4577–4592
-
[27]
ASTM C39, Test method for compressive strength of cylindrical concrete specimens, ASTM International, USA, 2017. 10.1520/C0039_C0039M-17B
ASTM C39 Test method for compressive strength of cylindrical concrete specimens ASTM International, USA 2017 10.1520/C0039_C0039M-17B
- S.-E. CEN, Cement-Part 1: Composition, specifications and conformity criteria for common cements, European Commitee for Standarization, Brussels, 2011
- S.E. CEN, Methods of testing cement – Part 1: Determination of strength, Vol. 169, European Commitee for Standarization, Brussels, 2005, p. 36
-
[30]
ASTM A572, Specification for high-strength low-alloy Columbium-Vanadium structural steel, ASTM International, USA, 2015. 10.1520/A0572_A0572M-15
ASTM A572, Specification for high-strength low-alloy Columbium-Vanadium structural steel, ASTM International, USA 2015 10.1520/A0572_A0572M-15
-
[31]
ASTM C31, Practice for making and curing concrete test specimens in the field, ASTM International, USA, 2017. 10.1520/C0031_C0031M-17
ASTM C31, Practice for making and curing concrete test specimens in the field, ASTM International, USA, 2017 10.1520/C0031_C0031M-17
- ACI 308R-01 R08, Guide to curing concrete, American Concrete Institute, Farmington Hills, MI, USA, 2008
- Pauw, A., Static modulus of elasticity of concrete as affected by density, ACI J. Proc., 1960, 57(6): 679–683
- American Concrete Institute, Report on high-strength concrete (ACI 363R-10), ACI Committee 363, Farmington Hills, Michigan, USA, 2010
- Kaar, P.H., Hanson, N.W., Capell, H.T., Stress–strain characteristics of high-strength concrete, Spec. Publ., 1978, 55: 161–186
- Hognestad, E., Hanson, N.W., McHenry, D., Concrete stress distribution in ultimate strength design, In Journal Proceedings, 1955, pp. 455–480
- Popovics, S., A review of stress–strain relationships for concrete, In Journal Proceedings, 1970, pp. 243–248