Development and characterization of graphene-reinforced Inconel 825 composite alloy for high temperature applications
References
- Ozgun, O., Aslantas, K., Ercetin, A., Powder metallurgy Mg-Sn alloys: Production and characterization, Sci. Iran., 2020, 27(3): 1255–1265. 10.24200/sci.2019.50212.1578
- Akkoyun, F., Cevik, Z.A., Ozsoy, K., Ercetin, A., Arpaci, I., Image processing approach to investigate the correlation between machining parameters and burr formation in micro-milling processes of selective-laser-melted AISI 316L, Micromachines, 2023, 14(7): 1376. 10.3390/mi14071376
- El-Eskandarany, M.S., Al-Hazza, A., Al-Hajji, L.A., Mechanically assisted Solid-State mixing and Spark plasma sintering for fabrication of bulk nanocomposite (WC/7(10Co/4cr))-Based ZrO2 systems, J. Mater. Eng. Perform., 2018, 26(4): 1540–1550. 10.1007/s11665-017-2580-3
- Munir, Z.A., Quach, D.V., Ohyanagi, M., Electric current activation of sintering: a review of the pulsed electric current sintering process, J. Am. Ceram. Soc., 2011, 94(1): 1–19
- Acchar, W., Camara, C.R.F.D., Cairo, C.A.A., Filgueira, M., Mechanical performance of alumina reinforced with NbC, TiC and WC, Mater. Res., 2012, 15: 821–824
- Ercetin, A., Özgün, Ö., Aslantaş, K., Der, O., Yalçın, B., Şimşir, E., et al., Microstructural and mechanical behavior investigations of NB-Reinforced MG–SN–AL–ZN–MN matrix magnesium composites, Metals, 2023, 13(6): 1097. 10.3390/met13061097
- Ogunbiyi, O., Jamiru, T., Sadiku, R., Adesina, O., Olajide, J.L., Beneke, L., Optimization of spark plasma sintering parameters of inconel 738LC alloy using response surface methodology (RSM), Int. J. Lightweight Mater. Manuf., 2020, 3(2): 177–188. 10.1016/j.ijlmm.2019.10.002
- Pakseresht, A., Javadi, A., Bahrami, M., Khodabakhshi, F., Simchi, A., Spark plasma sintering of a multilayer thermal barrier coating on Inconel 738 superalloy: Microstructural development and hot corrosion behavior, Ceram. Int., 2016, 42(2): 2770–2779. 10.1016/j.ceramint.2015.11.008
- Yan, S., Wang, Y., Wang, Q., Zhang, C., Chen, D., Cui, G., Enhancing mechanical properties of the Spark plasma sintered Inconel 718 alloy by controlling the Nano-Scale precipitations, Materials, 2019, 12(20): 3336. 10.3390/ma12203336
- Rutkowski, P., Huebner, J., Graboś, A., Kata, D., Pasiut, K., Handke, B., et al., Thermal properties of spark plasma sintered Inconel 625 modified by titanium zirconium mixed carbide, J. Therm. Anal. Calorim., 2023, 148(15): 7633–7652. 10.1007/s10973-023-12259-1
- Zhou, S., Xu, T., Hu, C., Wu, H., Liu, H., Ma, X., A comparative study of tungsten carbide and carbon nanotubes reinforced Inconel 625 composite coatings fabricated by laser cladding, Opt. Laser Technol., 2021, 140: 106967. 10.1016/j.optlastec.2021.106967
- Graboś, A., Huebner, J., Rutkowski, P., Zhang, S., Kuo, Y., Kata, D., et al., Microstructure and hardness of spark plasma sintered inconel 625-NBC composites for High-Temperature applications, Materials, 2021, 14(16): 4606. 10.3390/ma14164606
- Murakami, T., Korenaga, A., Ohana, T., Microstructure, mechanical properties, oxidation behaviors, and cutting performance of TiC0·5N0.5-X (X: W, Mo) cermet specimens prepared by spark plasma sintering, Ceram. Int., 2021, 47(2): 1986–1999. 10.1016/j.ceramint.2020.09.030
- Zhang, Z., Han, B., Huang, J., Han, Y., Zhou, Y., Kakegawa, K., et al., Mechanical behavior of cryomilledni superalloy by spark plasma sintering, Metall. Mater. Trans. A, 2009, 40(9): 2023–2029. 10.1007/s11661-009-9914-1
- Oglezneva, S.A., Kachenyuk, M.N., Smetkin, A.A., Savich, V.V., Functional gradient heat-resistant materials manufactured by spark plasma sintering, Mater. Sci. Forum, 2021, 1037: 464–472. 10.4028/www.scientific.net/msf.1037.464
- Diouf, S., Molinari, A., Densification mechanisms in spark plasma sintering: Effect of particle size and pressure, Powder Technol., 2012, 221: 220–227. 10.1016/j.powtec.2012.01.005
- Sharma, D., Kumar, V., Singh, S., Parametric study of the spark plasma sintering process on the mechanical properties of multi-layer graphene reinforced Ti6Al4V nanocomposites, Trans. Indian Inst. Met., 2023, 76(4): 1015–1025. 10.1007/s12666-022-02811-2
- Shongwe, M.B., Diouf, S., Durowoju, M.O., Olubambi, P.A., Effect of sintering temperature on the microstructure and mechanical properties of Fe–30% Ni alloys produced by spark plasma sintering, J. Alloy. Compd., 2015, 649: 824–832. 10.1016/j.jallcom.2015.07.223
- Li, X., Yang, C., Chen, W., Qu, S., Li, Y., Microstructure and mechanical properties of SPSed (Spark Plasma Sintered) Ti66Nb13Cu8Ni6.8Al6.2 bulk alloys with and without WC addition, Mater. Trans., 2009, 50(7): 1720–1724. 10.2320/matertrans.mf200924
- Sunil, B.R., Ganapathy, C., Kumar, T.S., Chakkingal, U., Processing and mechanical behavior of lamellar structured degradable magnesium–hydroxyapatite implants, J. Mech. Behav. Biomed. Mater., 2014, 40: 178–189. 10.1016/j.jmbbm.2014.08.016
- Yuan, X., Qiu, H., Zeng, F., Luo, W., Li, H., Wang, X., et al., Microstructural evolution and mechanical properties of Inconel 625 superalloy fabricated by pulsed microplasma rapid additive manufacturing, J. Manuf. Process., 2022, 77: 63–74. 10.1016/j.jmapro.2022.03.008
- Ogunbiyi, O., Jamiru, T., Sadiku, R., Adesina, O., Adesina, O.S., Obadele, B.A., Spark plasma sintering of graphene-reinforced Inconel 738LC alloy: wear and corrosion performance, Met. Mater. Int., 2022, 28(3): 695–709. 10.1007/s12540-020-00871-x
- Bhattacharya, R., Annasamy, M., Cizek, P., Kamaraj, M., Muralikrishna, G.M., Hodgson, P., et al., Evolution of phase constitution with mechanical alloying and spark plasma sintering of nanocrystalline AlxCoCrFeNi (x = 0, 0.3, 0.6, 1 mol) high-entropy alloys, J. Mater. Res., 2022, 37: 959–975. 10.1557/s43578-021-00483-0
- Narayana, P., Kim, S., Hong, J., Reddy, N., Yeom, J., Tensile properties of a newly developed high-temperature titanium alloy at room temperature and 650°C, Mater. Sci. Eng. A, 2018, 718: 287–291. 10.1016/j.msea.2018.01.113
- Tingaud, D., Jenei, P., Krawczynska, A., Mompiou, F., Gubicza, J., Dirras, G., Investigation of deformation micro-mechanisms in nickel consolidated from a bimodal powder by spark plasma sintering, Mater. Charact., 2015, 99: 118–127. 10.1016/j.matchar.2014.11.025
- Oketola, A., Jamiru, T., Adegbola, A.T., Ogunbiyi, O., Rominiyi, A.L., Smith, S., Spark plasma sintering of ceramic-reinforced binary/ternary nickel and titanium metal matrix composites: Mechanical properties, microstructure, and densification – A review, J. Alloy. Metall. Syst., 2023, 3: 100031. 10.1016/j.jalmes.2023.100031
- Chan, K.S., A grain boundary fracture model for predicting dynamic embrittlement and oxidation-induced cracking in superalloys, Metall. Mater. Trans. A, 2015, 46: 2491–2505
- Rajkumar, V., Vishnukumar, M., Sowrirajan, M., Kannan, A.R., Microstructure, mechanical properties and corrosion behaviour of Incoloy 825 manufactured using wire arc additive manufacturing, Vacuum, 2022, 203: 111324. 10.1016/j.vacuum.2022.111324
- Al-Saadi, M., Sandberg, F., Jönsson, P.G., Hulme-Smith, C.N., Modelling of strengthening mechanisms in wrought Nickel-Based 825 alloy subjected to solution annealing, Metals, 2021, 11(5): 771. 10.3390/met11050771
- Lu, H., Yang, C., Li, X., Cheng, Q., Ma, H., Wang, Z., et al., Microstructure evolution and superelasticity of Ti-24Nb-xZr alloys fabricated by spark plasma sintering, J. Alloy. Compd., 2020, 823: 153875. 10.1016/j.jallcom.2020.153875
- Rominiyi, A.L., Shongwe, M.B., Ogunmuyiwa, E.N., Babalola, B.J., Lepele, P.F., Olubambi, P.A., Effect of nickel addition on densification, microstructure and wear behaviour of spark plasma sintered CP-titanium, Mater. Chem. Phys., 2020, 240: 122130. 10.1016/j.matchemphys.2019.122130
DOI: https://doi.org/10.2478/msp-2025-0019 | Journal eISSN: 2083-134X (formerly 2083-124X) | Journal ISSN: 2083-1331
Language: English
Page range: 63 - 77
Submitted on: Dec 5, 2024
Accepted on: Jun 12, 2025
Published on: Jun 30, 2025
Published by: Wroclaw University of Science and Technology
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2025 Sivakumar Ponmalai, Dhavamani Chinnathambi, published by Wroclaw University of Science and Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.