Skip to main content
Have a personal or library account? Click to login
Cyclic oxidation of 304L and 316L stainless steel coated and uncoated with Cr3C2–NiCr at elevated temperatures Cover

Cyclic oxidation of 304L and 316L stainless steel coated and uncoated with Cr3C2–NiCr at elevated temperatures

Materials Science-Poland
Volume 43 (2025): Issue 1 (March 2025)
By: ,  ,  ,  ,  ,   and    
Open Access
|Mar 2025
References

References

  1. Kamal, S., Jayaganthan, R., Prakash, S., Kumar, S., Hot corrosion behavior of detonation gun sprayed Cr3C2–NiCr coatings on Ni and Fe-based superalloys in Na2SO4–60% V2O5 environment at 900°C, J. Alloy. Compd., 2008, 463(1–2): 358–372
    Search in Google ScholarBack to article
  2. Sahraoui, T., Guessasma, S., Fenineche, N.E., Montavon, G., Coddet, C., Friction and wear behaviour prediction of HVOF coatings and electroplated hard chromium using neural computation, Mater. Lett., 2004, 58: 654–660
    Search in Google ScholarBack to article
  3. Beczkowiak, L., Keller, H., Schwier, G., Carbide materials for HVOF applications – powder and coating properties, H.C. Starck GmbH and Co., Germany, 1999
    Search in Google ScholarBack to article
  4. Rajasekaran, B., Raman, S.G.S., Joshi, S.V., Sundararajan, G., Effect of detonation gun sprayed Cu–Ni–In coating on plain fatigue and fretting fatigue behaviour of Al–Mg–Si alloy, Surf. Coat. Technol., 2006, 201: 1–11
    Search in Google ScholarBack to article
  5. Kaur, M., Singh, H., Prakash, S., Surface engineering analysis of detonation-gun sprayed Cr3C2–NiCr coating under high-temperature oxidation and oxidation–erosion environments, Surf. Coat. Technol., 2011, 206(2–3): 530–541
    Search in Google ScholarBack to article
  6. Sahraoui, T., Fenineche, N.E., Montavon, G., Coddet, C., Structure and wear behaviour of HVOF sprayed Cr3C2–NiCr and WC–Co coatings, Mater. Des., 2003, 24: 309
    Search in Google ScholarBack to article
  7. [7] Kumar, N., Alam, M.S., Mishra, V., Vasudev, H., Yadav, P.C., Choubey, V.K., A comparative investigation of the effects of temperature on the oxidation resistance of high-velocity oxy-fuel coating on AISI316L, Phys. Scr., 2024, 99(5): 055031. 10.1088/1402-4896/ad3c7a
    Kumar N. Alam M.S. Mishra V. Vasudev H. Yadav P.C. Choubey V.K. A comparative investigation of the effects of temperature on the oxidation resistance of high-velocity oxy-fuel coating on AISI316L Phys. Scr. 2024 99 5 055031 10.1088/1402-4896/ad3c7a
    Open DOIBack to article
  8. Mudgal, D., Singh, S., Prakash, S., High temperature cyclic oxidation behavior of Ni and Co based superalloys, J. Miner. Mater. Charact. Eng., 2012, 11(3): 211–219
    Search in Google ScholarBack to article
  9. Sidhu, T.S., Agrawal, R.D., Prakash, S., Hot corrosion of some superalloys and role of high-velocity oxy-fuel spray coatings – a review, Surf. Coat. Technol., 2005, 198(1–3): 441–446
    Search in Google ScholarBack to article
  10. [10] Alam, M.S., Kumar, N., Das, A.K., Behaviour of thermally sprayed coating for hot corrosion applications: Review paper, J. Electrochem. Sci. Eng., 2024, 14(4): 459–472. 10.5599/jese.2324
    Alam M.S. Kumar N. Das A.K. Behaviour of thermally sprayed coating for hot corrosion applications: Review paper J. Electrochem. Sci. Eng. 2024 14 4 459 472 10.5599/jese.2324
    Open DOIBack to article
  11. [11] Kumar, N., Choubey, V.K., Comparative evaluation of oxidation resistance of detonation gun-sprayed Al2O3–40% TiO2 coating on nickel-based superalloys at 800°C and 900°C, High. Temp. Corros. Mater., 2023, 99(5–6): 359–373. 10.1007/s11085-023-10157-3
    Kumar N. Choubey V.K. Comparative evaluation of oxidation resistance of detonation gun-sprayed Al2O3–40% TiO2 coating on nickel-based superalloys at 800°C and 900°C High. Temp. Corros. Mater. 2023 99 5–6 359 373 10.1007/s11085-023-10157-3
    Open DOIBack to article
  12. Kaur, M., Singh, H., Prakash, S., High-temperature corrosion studies of HVOF sprayed Cr3C2–NiCr coating on SAE 347H boiler steel, J. Therm. Spray. Technol., 2008, 18(4): 619–631
    Search in Google ScholarBack to article
  13. Venkataraman, R., Ravikumar, B., Krishnamurthy, R., Das, D.K., A study on phase stability observed in as sprayed Alumina-13 wt% Titania coatings grown by detonation gun and plasma spraying on low alloy steel substrates, Surf. Coat. Technol., 2006, 201: 3087–3095
    Search in Google ScholarBack to article
  14. Bala, N., Singh, H., Prakash, S., An overview of characterizations and high temperature behaviour of thermal spray NiCr coatings, Int. J. Mater. Sci., 2007, 2(3): 201–218
    Search in Google ScholarBack to article
  15. Shukla, V.N., Jayaganthan, R., Tewari, V.K., Microstructural characterization and cyclic oxidation behavior of HVOF sprayed Cr3C2–NiCr coating on Boiler steel at elevated temperature, Mater. Sci. Forum, 2013, 736: 289–300
    Search in Google ScholarBack to article
  16. Birks, N., Meier, G.H., Pettit, F.S., Introduction to a high temperature oxidation of metals, Cambridge University Press, New York, 2006, p. 69
    Search in Google ScholarBack to article
  17. [17] Kumar, N., Choubey, V.K., Effect of WC-Co and 86WC-10Co-4Cr coatings on type-II hot corrosion behaviour & microstructure characteristics at 650 degree celsius, Surf. Coat. Technol., 2023, 469: 129812. 10.1016/j.surfcoat.2023.129812
    Kumar N. Choubey V.K. Effect of WC-Co and 86WC-10Co-4Cr coatings on type-II hot corrosion behaviour & microstructure characteristics at 650 degree celsius Surf. Coat. Technol. 2023 469 129812 10.1016/j.surfcoat.2023.129812
    Open DOIBack to article
  18. Kamal, S., Jayaganthan, R., Prakash, S., Evaluation of cyclic hot corrosion behaviour of detonation gun sprayed Cr3C2–25%NiCr coatings on nickel- and iron-based superalloys, Surf. Coat. Technol., 2009, 203: 1004–1013
    Search in Google ScholarBack to article
  19. Alam, M.S., Das, A.K., Advancement in cermet based coating on steel substrate: A review, Mater. Today: Proc., 2022, 56: 805–810
    Search in Google ScholarBack to article
  20. Kuruba, M., Gaikwad, G., Natarajan, J., Koppad P.G., Effect of carbon nanotubes on microhardness and adhesion strength of high-velocity oxy-fuel sprayed NiCr–Cr3C2 coatings, Proc. Inst. Mech. Eng., Part. L: J. Mater.: Des. Appl., 2022, 236: 86–96
    Search in Google ScholarBack to article
  21. Reddy, N.C., Koppad, P.G., Reddappa, H.N., Ramesh, M.R., Babu, E.R., Varol, T.E., Hot corrosion behaviour of HVOF sprayed Ni 3 Ti and Ni 3 Ti + (Cr 3 C 2 + 20NiCr) coatings in presence of Na2SO4-40% V2O5 at 650°C, Surf. Topogr., 2019, 7: 025019
    Search in Google ScholarBack to article
  22. Shivalingaiah, K., Sridhar, K.S., Sethuram, D., Murthy, K.S., Koppad, P.G., Ramesh, C.S., HVOF sprayed Inconel 718/cubic boron nitride composite coatings: microstructure, microhardness and slurry erosive behaviour, Mater. Res. Express, 2020, 6: 1265i8
    Search in Google ScholarBack to article
  23. Reddy, N.C., Kumar, B.A., Reddappa, H.N., Ramesh, M.R., Koppad, P.G., Kord, S., HVOF sprayed Ni3Ti and Ni3Ti + (Cr3C2 + 20NiCr) coatings: Microstructure, microhardness and oxidation behaviour, J. Alloy. Compd., 2018, 736: 236–245
    Search in Google ScholarBack to article
  24. Yang, M.L., Xu, J.L., Huang, J., Zhang, L.W., Luo, J.M., Wear resistance of N-doped CoCrFeNiMn high entropy alloy coating on the Ti-6Al-4V alloy, J. Therm. Spray. Technol., 2024, 33: 1–11
    Search in Google ScholarBack to article
  25. Bai, M., Liu, T., Liu, B., Li, Y., Yu, H., Zhao, Y., et al., Preparation and properties of polyurethane cold galvanizing coatings with phosphoric acid modified zinc powder, Surf. Coat. Technol., 2024, 489: 131128
    Search in Google ScholarBack to article
  26. Wang, H., Qian, D., Wang, F., Dong, Z., Chen, J., Predictive mechanical property and fracture behavior in high-carbon steel containing high-density carbides via artificial RVE modeling, Mater. Des., 2024, 247, 113383
    Search in Google ScholarBack to article
  27. Kamal, S., Jayaganthan, R., Prakash, S., High temperature oxidation studies of detonation-gunsprayed Cr3C2–NiCr coating on Fe- and Ni-based superalloys in air under cyclic condition at 900°C, J. Alloy. Compd., 2009, 472: 378–389
    Search in Google ScholarBack to article
  28. Alam, M.S., Das, A.K., Study on microstructure and cyclic oxidation behaviour of WC–CoCr cermet-based plasma-sprayed coatings developed on the austenite steel, High. Temp. Corros. Mater., 2023, 99(1): 151–161
    Search in Google ScholarBack to article
  29. Alam, M.S., Das, A.K., Hot corrosion behavior of plasma-sprayed WC-CoCr coatings on AISI 316L steel substrate in Na2SO4-25% NaCl salt environment, High. Temp. Corros. Mater., 2023, 99(5): 415–430
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/msp-2025-0010 | Journal eISSN: 2083-134X | Journal ISSN: 2083-1331
Journal RSS Feed
Language: English
Page range: 103 - 114
Submitted on: Jan 15, 2025
Accepted on: Apr 16, 2025
Published on: Mar 31, 2025
Published by: Wroclaw University of Science and Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Detonation gun,
Oxidation,
Cr3C2–NiCr,
SS,
Coating
Related subjects:
Materials sciences,
Materials sciences, other,
Nanomaterials,
Functional and smart materials,
Materials characterization and properties

© 2025 Naveen Kumar, Md Sarfaraz Alam, Nagendra Kumar Mishra, Sujeet Kumar, Jayant Giri, Ayman A. Aly, Gaurav Kumar Gupta, published by Wroclaw University of Science and Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 43 (2025): Issue 1 (March 2025)
Previous article
Next article