References
- Hawryluk, M., Selected methods of analysing and increasing the durability of forging tools in die forging processes at elevated temperatures, monograph, in polish, Scientific Publisher of the Institute of Sustainable Technologies-SRI, Radom, 2016
- Czarnecki, M., Filip, B., Szala, M., Analiza numeryczna procesu kucia matrycowego elementu typu dźwignia, Lublin, Poland, 2015
- Samołyk, G., Pater, Z., Rowek na wypływkę, Lubelskie Towarzystwo Naukowe, Lublin, 2005
- Dudkiewicz, Ł., Strategianiszyrynkowychnaprzy kładziefirmy SchranerPolska Sp. z o.o., Warszawa, Warsaw, Poland, 2017
- Website: www.researchandmarkets.com/research/kxm9db/global_forging (25.04.2023)
- Presentation: EURFORGE spring forum, Hain T., Słowenia, 2023
-
[7]
Jabłońska, M.B., Jasiak, K., Kowalczyk, K., Bednarczyk, I., Skwarski, M., Tkocz, M., et al., Deformation behaviour of high-manganese steel with addition of niobium under quasi-static tensile loading, Mater. Sci.-Poland, 2022, 40(3): 1–11. 10.2478/msp-2022-0029
Jabłońska M.B. Jasiak K. Kowalczyk K. Bednarczyk I. Skwarski M. Tkocz M. Deformation behaviour of high-manganese steel with addition of niobium under quasi-static tensile loading Mater. Sci.-Poland 2022 40 3 1 11 10.2478/msp-2022-0029
- Brucelle, O., Bernhart, G., Methodology for service life increase of hot forging tools, J. Mater. Process. Technol., 1999, 87(1–3): 237–246
- Wendland, J., Małdziński, L., Borowski, J., Ostrowska, K., Jurczak, H., Trwałość matryc azotowanych metodą ZeroFlow, Obróbka Plastyczna Metali, 2014, 25(3): 185–199
- Gronostajski, Z., Kaszuba, M., Hawryluk, M., Zwierzchowski, M., A review of the degradation mechanisms of the hot forging tools, Arch. Civ. Mech. Eng., 2014, 14(4): 528–539
- Duchek, M., Koukolikova, M., Kotous, J., Majer, M., Increasing of the lifetime of large forging dies by repairwelding, IOP Conf. Ser.: Mater. Sci. Eng., 2018, 307: 012011
- Buchmayr, B., Damage, lifetime, and repair of forging dies, BHM Berg-und Hüttenmännische Monatshefte, 2017, 162(3): 88–93
-
[13]
Jabłońska, M.B., Jasiak, K., Kowalczyk, K., Skwarski, M., Rodak, K., Gronostajski, Z., The influence of the heat generation during deformation on the mechanical properties and microstructure of the selected TWIP steels, Int. J. Mater. Form., 2023, 16: 30. 10.1007/s12289-023-01753-4
Jabłońska M.B. Jasiak K. Kowalczyk K. Skwarski M. Rodak K. Gronostajski Z. The influence of the heat generation during deformation on the mechanical properties and microstructure of the selected TWIP steels Int. J. Mater. Form. 2023 16 30 10.1007/s12289-023-01753-4
-
[14]
Yang, Z., Li, W., Liu, S., Gao, Q., Study on overlap rate and machinability of selected laser melting of maraging steel, Mater. Sci.-Poland, 2023, 41(2): 368–382. 10.2478/msp-2023-0028
Yang Z. Li W. Liu S. Gao Q. Study on overlap rate and machinability of selected laser melting of maraging steel Mater. Sci.-Poland 2023 41 2 368 382 10.2478/msp-2023-0028
- Ebara, R., Kubota, K. Failure analysis of hot forging dies for automotive components, Eng. Fail. Anal., 2008, 15: 881–893
-
[16]
Hawryluk, M., Dudkiewicz, Ł., Jabłońska, M., Polak, S., Marzec, J. Analysis of the destruction of a die insert used in the industrial process of hot die forging to produce a yoke forging, Eng. Fail. Anal., 2024, 164: 108661. 10.1016/j.engfailanal.2024.108661
Hawryluk M. Dudkiewicz Ł. Jabłońska M. Polak S. Marzec J. Analysis of the destruction of a die insert used in the industrial process of hot die forging to produce a yoke forging Eng. Fail. Anal. 2024 164 108661 10.1016/j.engfailanal.2024.108661
-
[17]
Zyguła, K., Cichocki, K., Kowalczyk, K., Puławski, M., Korpała, G., Wojtaszek, M., et al. Microstructure prediction of 80MnSi8-6 steel after hot deformation based on dynamic recrystallization kinetics and FEM simulation, JOM, 2024, 76: 5193–5209. 10.1007/s11837-024-06648-6
Zyguła K. Cichocki K. Kowalczyk K. Puławski M. Korpała G. Wojtaszek M. Microstructure prediction of 80MnSi8-6 steel after hot deformation based on dynamic recrystallization kinetics and FEM simulation JOM 2024 76 5193 5209 10.1007/s11837-024-06648-6
-
[18]
Moussaoui, M., Bendriss, A., Tahiri, A., Kellai, A., Zergod, S., Djeloud, H., et al., Numerical and experimental analysis of the notch effect on fatigue behavior of polymethylmethacrylate metal based on strain energy density method and the extended finite element method, Mater. Sci.-Poland, 2023, 41(2): 401–413. 10.2478/msp-2023-0027
Moussaoui M. Bendriss A. Tahiri A. Kellai A. Zergod S. Djeloud H. Numerical and experimental analysis of the notch effect on fatigue behavior of polymethylmethacrylate metal based on strain energy density method and the extended finite element method Mater. Sci.-Poland 2023 41 2 401 413 10.2478/msp-2023-0027
-
[19]
Wojtaszek, M., Lisiecki, Ł., Łukaszek-Sołek, A., Korpała, G., Zyguła, K., Śleboda, T., et al., Application of processing maps and numerical modelling for identification of parameters and limitations of hot forging process of 80MnSi8-6 steel, Arch. Civ. Mech. Eng., 2023, 23: 240. 10.1007/s43452-023-00783-8
Wojtaszek M. Lisiecki Ł. Łukaszek-Sołek A. Korpała G. Zyguła K. Śleboda T. Application of processing maps and numerical modelling for identification of parameters and limitations of hot forging process of 80MnSi8-6 steel Arch. Civ. Mech. Eng. 2023 23 240 10.1007/s43452-023-00783-8
- Forsberg, P., Hollman, P., Jacobson, S., Wear mechanism study of exhaust valve system in modern heavy-duty combustion engines, Wear, 2001, 271: 2477–2484
- Hawryluk, M., Gronostajski, Z., Wear mechanisms analysis of dies used in the process of hot forging a valve made of high nickel steel, Arch. Metall. Mater., 2018, 63: 1963–1974
-
[22]
Hawryluk, M., Marzec, J., Lachowicz, M., Makuła, P., Nowak, K., Evaluation of the possibility of improving the durability of tools made of X153CrMoV12 steel used in the extrusion of a clay band in ceramic roof tile production, Mater. Sci.-Poland, 2023, 41(1): 94–109. 10.2478/msp-2023-0011
Hawryluk M. Marzec J. Lachowicz M. Makuła P. Nowak K. Evaluation of the possibility of improving the durability of tools made of X153CrMoV12 steel used in the extrusion of a clay band in ceramic roof tile production Mater. Sci.-Poland 2023 41 1 94 109 10.2478/msp-2023-0011
- Kima, D.H., Leeb, H.C., Kimc, B.M., Kimd, K.H., Estimation of die service life against plastic deformation and wear during hot forging processes, J. Mater. Process. Technol., 2012, 212: 1742–1752
- Saiki, H., Marumo, Y., Minami, A., Sanoi, T., Effect of the surface structure on the resistance to plastic deformation of a hot forging tool, J. Mater. Process. Technol., 2001, 113: 22–27
- Chanin, T., Yingyot, A., Evaluation of forging die defect by considering plastic deformation and abrasive wear in a hot forged axle shaft, Appl. Sci. Eng. Progr., 2021, 14(1): 60–71
- Groseclose, A., Changhyok, C., Gonzalez-Mendez, J., Yelich, T., Altan, T., Estimation of die stresses and wear in warm forging of steel pinion shafts. J. Technol. Exploit. Mech. Eng., 2015, 1(1–2), 150–165.
-
[27]
Hawryluk, M., Review of selected methods of increasing the life of forging tools in hot die forging processes, Arch. Civ. Mech. Eng., 2016, 16: 845–866. 10.1016/j.acme.2016.06.00
Hawryluk , M. Review of selected methods of increasing the life of forging tools in hot die forging processes Arch. Civ. Mech. Eng. 2016 16 845 866 10.1016/j.acme.2016.06.00
- Čamek, L., Jelen, L., Increasing material durability for drop hot forging, In: METAL 2009 – 18th International Conference on Metallurgy and Materials, Conference Proceedings, 2009
- Wang, S., Wang, F., Chen, K.M., Cui, X., A newly-developed high wear resistant cast hot-forging die steel. ISIJ Int., 2007, 47(9): 1335–1340
- Xianghong, C., Shuqi, W., Qichuan, J., Kangmin, C., Research on thermal wear of cast hot forging die steel modified by rare earths, J. Rare Earths, 2007, 25(1): 88–92
- Guo, Y., Liu, W., Sun, M., Xu, B., Li, D., A method based on semi-solid forming for eliminating coarse dendrites and shrinkage porosity of H13 tool steel, Metals (Basel), 2018, 8(4): 277
- Wollmann, J., Dolny, A., Kaszuba, M., Gronostajski, Z., Gude, M., Methods for determination of low-cycle properties from monotonic tensile tests of 1.2344 steel applied for hot forging dies, Int. J. Adv. Manuf. Technol., 2019, 102: 3357–3367; Marashi, J., Yakushina, E., Xirouchakis, P., Zante, R., Foster, J., An evaluation of H13 tool steel deformation in hot forging conditions, J. Mater. Process Technol., 2017, 246: 276–284
- Kashani, H., Amadeh, A., Vatanara, M.R., Improvement of wear resistance of hot working tool steel by hardfacing Part 2 – Case study, Mater. Sci. Technol., 2008, 24(3): 356–360
- Ahn, D.G., Lee, H.J., Cho, J.R., Guk, D.S., Improvement of the wear resistance of hot forging dies using a locally selective deposition technology with transition layers, CIRP Ann. – Manuf. Technol., 2016, 65(1): 257–260
- Kim, D.I., Jang, Y.H., Lee, H.J., Ahn, D.G., Song, H., Seok, C.S., Design of overlay coated region with hardfacing, transition and damage diminution layers for the reduction of damages of hot forging tools, J. Mech. Sci. Technol., 2017, 31: 5639–5647
- Mane, J.B., Prasad, R.C., Radhakrishnan, B., The influence of nitrocarburizing on wear behaviour of forging dies, In: ASM Heat Treating Society – 26th Conference and Exposition: Gearing Up for Success, 2011
- Reddy, C.A.K., Venkatesh, B., Mayurnath, D., Narendra, T.V.S., Ajay, K., Jhala, G., Effect of the nitride layer on mechanical properties of bearing steel, Mater. Today Proc., 2024
- Lo, K.H., Shek, C.H., Lai, J.K.L., Recent developments in stainless steels, Mater. Sci. Eng. R. Rep., 2009, 65: 39–104
- Calmunger, M., Chai, G., Eriksson, R., Johansson, S., Moverare, J.J., Characterization of austenitic stainless steels deformed at elevated temperature, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2017, 48: 4525–4538
- Gronostajski, Z., Widomski, P., Kaszuba, M., Zwierzchowski, M., Polak, S., Piechowicz, Ł., et al., Influence of the phase structure of nitrides and properties of nitrided layers on the durability of tools applied in hot forging processes, J. Manuf. Process., 2020, 52, 247–262