References
- Yang, J., Zhang, P., Wang, J., Wei, S.H., Theoretical investigation of halide perovskites for solar cell and optoelectronic applications, Chin. Phys. B, 2020, 29: 108401
- Shariq, M., Alzahrani, A., Almutib, E., Alharbi, A.F., Algarni, S.A., Almashnowi, M.Y.A., et al., Harnessing the potential of NiMn2O4 nanoparticle: A next-generation supercapacitor electrode material, Phys. Scr., 2024, 99: 0035941
- Arivazhagan, V., Hang, P., Parvathi, M.M., Tang, Z., Khan, A., Yang, D., et al., All-vacuum deposited and thermally stable perovskite solar cells with F4-TCNQ/CuPc hole transport layer, Nanotechnology, 2019, 31(6): 065401
- Dai, P., Lu, J., Tan, M., Wang, Q., Wu, Y., Ji, L., et al., Transparent conducting indium-tin-oxide (ITO) film as full front electrode in III–V compound solar cell, Chin. Phys. B, 2017, 26: 037305
- Ansari, Z.A., Singh, T.J., Islam, S.M., Singh, S., Mahala, P., Khan, A., et al., Photovoltaic solar cells based on graphene/gallium arsenide Schottky junction, Optik, 2019, 182: 500–506
- Alasmari, A., Shariq, M., Alhazmi, N.E., Alzahrani, H.S., Bouzgarrou, S.M., Alkhayri, F., et al., Enhancing perovskite solar cells with graphene-based nanocomposites for sustainable energy: A comprehensive review, Diam. Relat. Mater., 2024, 148: 111517
- Khan, A., Kumar, R.R., Cong, J., Imran, M., Yang, D., Yu, X., CVD Graphene on textured silicon: An emerging technologically versatile heterostructure for energy and detection applications, Adv. Mater. Interfaces, 2022, 9(1): 2100977
- Farji, M., Development of photovoltaic cells: A materials prospect and next-generation futuristic overview, Braz. J. Phys., 2021, 51: 1916–1928
- Kumar, M., Rani, S., Vashishtha, P., Gupta, G., Wang, X., Singh, V.N., Exploring the optoelectronic properties of SnSe: A new insight, J. Mater. Chem. C., 2022, 10(44): 16714–16722
-
[10]
Singh, Y., Rani, S., Shashi, Parmar, R., Kumari, R., Kumar, M., et al., Sb2Se3 heterostructure solar cells: Techniques to improve efficiency, Sol. Energy, 2023, 249(September 2022): 174–182. 10.1016/j.solener.2022.11.033
Singh Y. Rani S. Shashi Parmar R. Kumari R. Kumar M. Sb2Se3 heterostructure solar cells: Techniques to improve efficiency Sol. Energy 2023 249 September 2022 174 182 10.1016/j.solener.2022.11.033
- Kumar, M., Rani, S., Pandey, A., Gour, K.S., Husale, S., Singh, P., et al., Highly responsive, low-bias operated SnSe2 nanostructured thin film for trap-assisted NIR photodetector, J. Alloy. Compd., 2020, 838: 155384
- Priezzhev, A.V., Tuchin, V.V., Lugovtsov, A.E., Kirillin, M.Y., Structural, optical and photoluminescence investigations of nanocrystalline CuO thin films at different microwave powers, Opt. Quant. Electron., 2022, 52: 1–16
- Lindwall, G., Shang, S., Kelly, N.R., Anderson, T., Liu, Z.K., Thermodynamics of the S–Sn system: Implication for synthesis of earth abundant photovoltaic absorber materials, Sol. Energy, 2016, 125: 314–323
- Vidal, J., Lany, S., d’Avezac, M., Zunger, A., Zakutayev, A., Francis, J., et al., Band-structure, optical properties, and defect physics of the photovoltaic semiconductor SnS, Appl. Phys. Lett., 2012, 100(3): 032104
- Javed, A., Khan, N., Bashir, S., Ahmad, M., Bashir, M., Thickness dependent structural, electrical and optical properties of cubic SnS thin films, Mater. Chem. Phys., 2020, 246: 122831
- Xin, C., Zheng, J., Su, Y., Li, S., Zhang, B., Feng, Y., et al., Few-layer tin sulfide: A new black-phosphorus-analogue 2D material with a sizeable band gap, odd–even quantum confinement effect, and high carrier mobility, J. Phys. Chem. C., 2016, 120(39): 22663–22669
- Abass, K.H., Adil, A., Alrubaie, A.J., Rabee, B.H., Kadim, A.M., Talib, S.H., et al., Fabrication and characterization of p-SnS/n-Si solar cell by thermal evaporation technique and the effect of Ag-doped on its efficiency, Int. J. Nanosci., 2023, 22(01): 2350003
- Lasisi, A., Fabrication and characterization of tin sulphide SnS based thin film solar cells, Asian J. Sci. Technol., 2016, 7(11): 3887–3890
- Cho, J.Y., Kim, S., Nandi, R., Jang, J., Yun, H.S., Enkhbayar, E., et al., Achieving over 4% efficiency for SnS/CdS thin-film solar cells by improving the heterojunction interface quality, J. Mater. Chem. A, 2020, 8(39): 20658–20665
- Voznyi, A.A., Bilousov, O.V., Landeke-Wilsmark, B., Keller, J., Ren, J., Zhang, S.L., et al., Ultrathin solar cells based on atomic layer deposition of cubic versus orthorhombic tin monosulfide, ACS Appl. Energy Mater., 2021, 4(8): 8085–8097
- Hartman, K., Annealing for intrinsic point-defect control and enhanced solar cell performance: the case of H₂S and tin sulfide (SnS), Massachusetts Institute of Technology, United States, 2015
- Sinsermsuksakul, P., Sun, L., Lee, S.W., Park, H.H., Kim, S.B., Yang, C., et al., Overcoming efficiency limitations of SnS‐based solar cells, Adv. Energy Mater., 2014, 4(15): 1400496
- Lim, D., Suh, H., Suryawanshi, M., Song, G.Y., Cho, J.Y., Kim, J.H., et al., Kinetically controlled growth of phase‐pure SnS absorbers for thin film solar cells: Achieving efficiency near 3% with long‐term stability using an SnS/CdS heterojunction, Adv. Energy Mater., 2018, 8(10): 1702605
- Madkhali, O., A review of novel methods to improve the optical and electrical properties of n-type and p-type sulphides and oxides: leading the frontiers of semiconductor technology, Phys. Scr., 2024, 99: 022004
- Jaramillo, R., Steinmann, V., Yang, C., Hartman, K., Chakraborty, R., Poindexter, J.R., et al., Making record-efficiency SnS solar cells by thermal evaporation and atomic layer deposition, JoVE (J. Vis. Exp.), 2015, 99:e52705
- Gupta, Y., Arun, P., Optimization of SnS active layer thickness for solar cell application, J. Semicond., 2017, 38(11): 113001
- Kawanishi, S., Suzuki, I., Bauers, S.R., Zakutayev, A., Shibata, H., Yanagi, H., et al., SnS homojunction solar cell with n‐type single crystal and p‐type thin film, Sol. RRL, 2021, 5(4): 2000708
- Wang, Y., Gong, H., Fan, B., Hu, G., Photovoltaic behavior of nanocrystalline SnS/TiO2, J. Phys. Chem. C., 2010, 114(7): 3256–3259
- Yun, H.S., Park, B., Choi, Y.C., Im, J., Shin, T.J., Seok, S.I., Efficient nanostructured TiO2/SnS heterojunction solar cells, Adv. Energy Mater., 2019, 9(35): 1901343
- Islam, M.E., Islam, M.R., Ahmmed, S., Hossain, M.K., Rahman, M.F., Highly efficient SnS-based inverted planar heterojunction solar cell with ZnO ETL, Phys. Scr., 2023, 98(6): 065501
- Islam, M., Thakur, A., Multistep design simulation of heterojunction solar cell architecture based on SnS absorber, Phys. Scr., 2023, 98(10): 105950
- Ray, S.P., Lohia, P., Dwivedi, D., Engineering in SnS-based solar cell for an efficient device with nickel oxide (NiO) as the hole transport layer, Adv. Mater. Lett., 2021, 12(9): 1
- Burgelman, M., Decock, K., Khelifi, S., Abass, A., Advanced electrical simulation of thin film solar cells, Thin Solid. Films, 2013, 535: 296–301
- Burgelman, M., Nollet, P., Degrave, S., Modelling polycrystalline semiconductor solar cells, Thin Solid. Films, 2000, 361: 527–532
- Kumar, M., Rani, S., Singh, Y., Mamta, Kumar, A., Singh, V.N., Strategy to improve the efficiency of tin selenide based solar cell: A path from 1.02 to 27.72%, Sol. Energy, 2022, 232: 146–153
- Mouchou, R., Jen, T.C., Laseinde, O.T., Ukoba, K.O., Numerical simulation and optimization of p-NiO/n-TiO2 solar cell system using SCAPS, Mater. Today Proc., 2021, 38: 835–841
- Garain, R., Basak, A., Singh, U.P., Study of thickness and temperature dependence on the performance of SnS based solar cell by SCAPS-1D, Mater. Today Proc., 2021, 39: 1833–1837
- Yadav, R.K., Pawar, P.S., Nandi, R., Neerugatti, K.E., Kim, Y.T., Cho, J.Y., et al., A qualitative study of SnSe thin film solar cells using SCAPS 1D and comparison with experimental results: A pathway towards 22.69% efficiency, Sol. Energy Mater. Sol Cell, 2022, 244: 111835
- Selim, M.S., Gouda, M.E., El-Shaarawy, M.G., Salem, A.M., Abd El-Ghany, W.A., Effect of thickness on optical properties of thermally evaporated SnS films, Thin Solid. Films, 2013, 527: 164–169
- Wang, S.F., Wang, W., Fong, W.K., Yu, Y., Surya, C., Tin compensation for the SnS based optoelectronic devices, Sci. Rep., 2017, 7(1): 39704
- Tiwari, P., Alotaibi, M.F., Al-Hadeethi, Y., Srivastava, V., Arkook, B., Sadanand, S., et al., Design and simulation of efficient SNS-based solar cell using spiro-OMeTAD as hole transport layer, Nanomaterials, 2022, 12(14): 1–9
- Gholami-Milani, A., Ahmadi-Kandjani, S., Olyaeefar, B., Kermani, M.H., Performance analyses of highly efficient inverted all-perovskite bilayer solar cell, Sci. Rep., 2023, 13(1): 8274
- Kirchartz, T., Rau, U., What makes a good solar cell?,Adv. Energy Mater., 2018, 8(28): 1703385
- Zaid, M., Altowairqi, Y., Majid, S.S., Somvanshi, A., Shariq, M., Ali, S.K., et al., Comparative structural, optical, and dielectric studies of Zn1−x Mnx/2Ax/2O (A = Ni, Co and x = 0.24) nanoparticles, Appl. Phys. A, 2022, 128(11): 1002
- Rehman, F., Dahshan, A., Yakout, H.A., Shariq, M., Ahmad, P., Saeed, Y., Tuning the optical properties through bandgap engineering in Si-doped YAuPb: Ab initio study, J. Comput. Electron., 2022, 21(1): 119–127
- Shuai, Z., Cheng, S., Thermally evaporated SnS: Cu thin films for solar cells, 2011 6th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE, 2011
- Kirchartz, T., Rau, U., What makes a good solar cell?, Adv. Energy Mater., 2018, 8(28): 1703385
- Fell, A. Niewelt, T., Steinhauser, B., Heinz, F.D., Schubert, M.C., Glunz, S.W., The radiative recombination coefficient of silicon: Reassessment of its charge carrier density dependence, 2021 IEEE 48th Photovoltaic Specialists Conference (PVSC), IEEE, 2021
- Trupke, T., Green, M.A., Würfel, P., Altermatt, P.P., Wang, A., Zhao, J., et al., Temperature dependence of the radiative recombination coefficient of intrinsic crystalline silicon, J. Appl. Phys., 2003, 94(8): 4930–4937
- Gray, J.L., The physics of the solar cell, Handbook of photovoltaic science and engineering, Vol. 2, 2011, pp. 82–128
- Balakrishnan, J. Preethi, J., Kushvaha, L.K., Mayandi, S.S., Colloidal quantum dot photodetectors for infrared imaging, in types of photodetectors and their applications, Nova Science Publishers, Inc, Suite N Hauppauge, NY, USA, 2022, pp. 203–240
- Kumar, A., Thakur, A.D., Role of contact work function, back surface field, and conduction band offset in Cu2ZnSnS4 solar cell, Jpn. J. Appl. Phys., 2018, 57(8S3): 08RC05
- Ikuno, T., Suzuki, R., Kitazumi, K., Takahashi, N., Kato, N., Higuchi, K., SnS thin film solar cells with Zn1−xMgxO buffer layers, Appl. Phys. Lett., 2013, 102(19): 193901
- Nair, K.K., Jose, J., Ravindran, A., Analysis of temperature dependent parameters on solar cell efficiency using MATLAB, IJEDR, 2016, 4: 536–541
-
[55]
Gohri, S., Madan, J., Pandey, R., Sharma, R., Assessment of WSe2 based BSF layer on CZTSSe solar cell using SCAPS-1D, IEEE 48th Photovoltaic Specialists Conference (PVSC), 2021. 10.1109/PVSC43889.2021.9518825
Gohri S. Madan J. Pandey R. Sharma R. Assessment of WSe2 based BSF layer on CZTSSe solar cell using SCAPS-1D IEEE 48th Photovoltaic Specialists Conference (PVSC) 2021 10.1109/PVSC43889.2021.9518825
- Alok, K.P., Bramha, P.P., Performance analysis of WS2 TMD material as an absorber layer used in solar cell, 2020 International Conference on Electrical and Electronics Engineering (ICE3-2020), 2020
-
[57]
Ferdiansjah, Faridah, Tirtakusuma Mularso, K., Analysis of back surface field (BSF) performance in P-type and N-type monocrystalline silicon wafer, E3S Web Conf., 2018, 43: 01006. 10.1051/e3sconf/20184301006
Ferdiansjah Faridah Tirtakusuma Mularso K. Analysis of back surface field (BSF) performance in P-type and N-type monocrystalline silicon wafer E3S Web Conf. 2018 43 01006 10.1051/e3sconf/20184301006