References
- Torabi A, Campagnolo A, Berto F. Local strain energy density to predict mode II brittle fracture in Brazilian disk specimens weakened by V-notches with end holes. Mater Des. 2015;69: 22–9.
- Moussaoui M, . Brittle fracture investigation from disc specimen weakened by U-notch in mixed mode I+ II. Eng Solid Mech. 2020;8(4): 337–52.
- Torabi A, Berto F. Strain energy density to assess mode II fracture in U-notched disk-type graphite plates. Int J Damage Mech. 2014;23(7): 917–30.
- Berto F, Lazzarin P. Fatigue strength of Al7075 notched plates based on the local SED averaged over a control volume. Sci China Phys. Mech Astron. 2014;57(1): 30–38.
- Berto F, Campagnolo A, Welo T. Local strain energy density to assess the multiaxial fatigue strength of titanium alloys. Frat Integrità Strutt. 2016;10(37): 69–79.
- Braun M,. Extension of the strain energy density method for fatigue assessment of welded joints to sub-zero temperatures. Fatigue Fract Eng Mater Struct. 2020;43(12): 2867–82.
- Berto F, Razavi S, Torgersen J. Frontiers of fracture and fatigue: Some recent applications of the local strain energy density. Frat Integrità Strutt. 2018;12(43): 1–32.
- Lazzarin P, Zambardi R. A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches. Int J Fract. 2001;112(3): 275–98.
- Berto F, Lazzarin P. The volume-based Strain Energy Density approach applied to static and fatigue strength assessments of notched and welded structures. Proc Eng. 2009;1(1): 155-8.
- Aliha M, . Mixed mode I/II fracture investigation of Perspex based on the averaged strain energy density criterion. Phys Mesomech. 2017;20(2): 149–56.
- Aliha M, . On the applicability of ASED criterion for predicting mixed mode I + II fracture toughness results of a rock material. Theor Appl Fract Mech. 2017;92: 198–204.
- Negru R, . Assessment of brittle fracture for PUR materials using local strain energy density and theory of critical distances. Theor Appl Fract Mech. 2015;79: 62–9.
- Ayatollahi M, Berto F, Lazzarin P. Mixed mode brittle fracture of sharp and blunt V-notches in polycrystalline graphite. Carbon. 2011;49(7): 2465–74.
- Berto F, . Local strain energy density to predict sizedependent brittle fracture of cracked specimens under mixed mode loading. Theor Appl Fract Mech. 2016;86: 217–24.
- Salavati H., . A new expression to evaluate the critical fracture load for bainitic functionally graded steels under mixed mode (I+II) loading. Eng Fail Anal. 2015;48: 121–36.
- Li Y, Fantuzzi N, Tornabene F. On mixed mode crack initiation and direction in shafts: strain energy density factor and maximum tangential stress criteria. Eng Fract Mech. 2013;109: 273–89.
- Sih GC Strain-energy-density factor applied to mixed mode crack problems. Int J Fract. 1974;10(3): 305–21.
- Sih GC. Mechanics of fracture initiation and propagation: surface and volume energy density applied as failure criterion. ©Springer Science+Business Media Dordrecht Originally published by Kluwer Academic Publishers in 1991.
- Sih G, Macdonald B. Fracture mechanics applied to engineering problems-strain energy density fracture criterion. Eng Fract Mech. 1974;6(2): 361–86.
- Sih G, Cha B. A fracture criterion for three-dimensional crack problems. Eng Fract Mech. 1974;6(4): 699–723.
- Berto F, Lazzarin P. A review of the volume-based strain energy density approach applied to V-notches and welded structures. Theor Appl Fract Mech. 2009;52(3); 183–94.
- Abolghasemzadeh M, Alizadeh Y, Mohammadi H. Fatigue strength reduction factors based on strain energy density applied to sharp and blunt notches under multiaxial loading. Phy Mesomech. 2020;23(1): 66–80.
- Williams M. Stress singularities resulting from various boundary conditions in angular corners of plates in extension. Journal of Applied Mechanics 1952;19(4): 526-28.
- Luo P, . Fatigue evaluation of rib-to-deck welded joint using averaged strain energy density method. Eng Struct. 2018;177: 682–94.
- Lazzarin P, Tovo R. A unified approach to the evaluation of linear elastic stress fields in the neighborhood of cracks and notches. Int J Fract. 1996;78(1): 3–19.
- Berto F, Razavi S, Ayatollahi M. Some methods for rapid evaluation of the mixed mode NSIFs. Procedia Struct Integr. 2017;3: 126–34.
- Berto F, Campagnolo A, Lazzarin P. Fatigue strength of severely notched specimens made of Ti–6Al–4V under multiaxial loading. FF EMS. 2015;38(5): 503–17.
- Berto F, Gallo P. Extension of linear elastic strain energy density approach to high temperature fatigue and a synthesis of Cu-Be alloy experimental tests. Eng Solid Mech. 2015;3(2): 111–6.
- Kim YW, . Energy-based approach to predict the fatigue life behavior of pre-strained Fe–18Mn TWIP steel. Mater Sci Eng: A. 2011;528(13–14): 4696–702.
- Mi C, . An energy-based method for lifetime assessment on high strength steel welded joints under different pre-strain levels. Materials. 2022;15(13): p4558 N-PAG12p.
- You X, . Low cycle fatigue behaviour and life prediction of Q345B steel and its welded joint. Mater Res Innov. 2015;19(Sup 5): S5-1299–S5-1303.
- Gallo P, Berto F. Advanced materials for applications at high temperature: fatigue assessment by means of local strain energy density. Adv Eng Mater. 2016;18(12): 2010–7.
- El Haddad M, Topper T, Smith K. Prediction of nonpropagating cracks. Eng Fract Mech. 1979;11(3): 573–84.
- Lazzarin P, . Local strain energy density and fatigue strength of welded joints under uniaxial and multiaxial loading. Eng Fract Mech. 2008;75(7): 1875–89.
- Lazzarin P, Berto F. Some expressions for the strain energy in a finite volume surrounding the root of blunt V- notches. Int J Fract. 2005;135(1): 161–85.
- Meneghetti G, ., Crack initiation life in notched Ti-6Al-4V titanium bars under uniaxial and multiaxial fatigue: synthesis based on the averaged strain energy density approach. Frattura ed Integrità Strutturale, 2017;11(41): Pages 8–15. doi: 10.3221/IGF-ESIS.41.02
- Berto F, . Fracture assessment of U-notches under mixed mode loading: two procedures based on the ‘equivalent local mode I’concept. Int J Fract. 2007;148(4): 415–33.
- Gómez F, . Local strain energy to assess the static failure of U-notches in plates under mixed mode loading. Int JFract. 2007;145(1): 29–45.
- Negru R, . Notch effect assessment in a PUR material using a ring shaped specimen. Theor Appl Fract Mech. 2018;97: 500–6.
- Lazzarin P, Zappalorto M, Berto F. Averaged strain energy density and J-integral for U-and blunt V-shaped notches under torsion. Int J Fract. 2014;188(2): 173–86.