Influence of elevated temperature on the engineering properties of ultra-high-performance fiber-reinforced concrete

Abadel, Aref A.; Khan, M. Iqbal; Masmoudi, Radhouane

Influence of elevated temperature on the engineering properties of ultra-high-performance fiber-reinforced concrete

Materials Science-Poland

Volume 41 (2023): Issue 1 (March 2023)

By:

Aref A. Abadel, M. Iqbal Khan and Radhouane Masmoudi

Open Access

|Aug 2023

References

Ding M, Yu R, Feng Y, Wang S, Zhou F, Shui Z, Gao X, He Y, Chen L. Possibility and advantages of producing an ultra-high performance concrete (UHPC) with ultra-low cement content. Constr Build. Mater. 2021; 273:122023. https://doi.org/10.1016/j.conbuildmat.2020.122023.
Open DOI Search in Google Scholar Back to article
Yu R, Spiesz P, Brouwers HJH. Development of an ecofriendly ultra-high performance concrete (UHPC) with efficient cement and mineral admixtures uses. 2014.
Search in Google Scholar Back to article
Li Y, Tan KH, Yang EH. Influence of aggregate size and inclusion of polypropylene and steel fibers on the hot permeability of ultra-high performance concrete (UHPC) at elevated temperature. Constr Build Mater. 2018; 169:629–637. https://doi.org/10.1016/j.conbuildmat.2018.01.105.
Open DOI Search in Google Scholar Back to article
Arora A, Yao Y, Mobasher B, Neithalath N. Fundamental insights into the compressive and flexural response of binder- and aggregate-optimized ultra-high performance concrete (UHPC). Cem Concr Compos. 2019; 98:1–13. https://doi.org/10.1016/j.cemconcomp.2019.01.015.
Open DOI Search in Google Scholar Back to article
Hassan M, Wille K. Experimental impact analysis on ultra-high performance concrete (UHPC) for achieving stress equilibrium (SE) and constant strain rate (CSR) in Split Hopkinson pressure bar (SHPB) using pulse shaping technique. Constr Build Mater. 2017; 144:747–757. https://doi.org/10.1016/j.conbuildmat.2017.03.185.
Open DOI Search in Google Scholar Back to article
Yang J, Chen B, Su J, Xu G, Zhang D, Zhou J. Effects of fibers on the mechanical properties of UHPC: a review. J Traffic Transp Eng. 2022; 9:363–387. https://doi.org/10.1016/j.jtte.2022.05.001.
Open DOI Search in Google Scholar Back to article
Meng W, Khayat K. Effect of hybrid fibers on fresh, mechanical properties, and autogenous shrinkage of cost effective UHPC. J Mater Civ Eng. 2018; 30. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002212.
Open DOI Search in Google Scholar Back to article
Xu L, Lu Q, Chi Y, Yang Y, Yu M, Y. Yan Y. Axial compressive performance of UHPC filled steel tube stub columns containing steel-polypropylene hybrid fiber. Constr Build Mater. 2019; 204:754–767. https://doi.org/10.1016/j.conbuildmat.2019.01.202.
Open DOI Search in Google Scholar Back to article
Su Y, Li J, Wu C, Wu P, Li Z.-X. Effects of steel fibres on dynamic strength of UHPC. Constr Build Mater. 2016; 114:708–718. https://doi.org/10.1016/j.conbuildmat.2016.04.007.
Open DOI Search in Google Scholar Back to article
Zeng X, Deng K, Liang H, Xu R, Zhao C, Cui B. Uniaxial behavior and constitutive model of reinforcement confined coarse aggregate UHPC. Eng Struct. 2020; 207:110261. https://doi.org/10.1016/j.engstruct.2020.110261.
Open DOI Search in Google Scholar Back to article
Zhang Y, Li X, Zhu Y, Shao X. Experimental study on flexural behavior of damaged reinforced concrete (RC) beam strengthened by toughness-improved ultra-high performance concrete (UHPC) layer. Compos Part B Eng. 2020; 186:107834. https://doi.org/10.1016/j.compositesb.2020.107834.
Open DOI Search in Google Scholar Back to article
Ghafari E, Costa H, Júlio E. RSM-based model to predict the performance of self-compacting UHPC reinforced with hybrid steel micro-fibers. Constr Build Mater. 2014; 66:375-383. https://doi.org/10.1016/j.conbuildmat.2014.05.064.
Open DOI Search in Google Scholar Back to article
Thomas RJ, Sorensen AD. Review of strain rate effects for UHPC in tension. Constr Build Mater. 2017; 153:846-856. https://doi.org/10.1016/j.conbuildmat.2017.07.168.
Open DOI Search in Google Scholar Back to article
Ozawa M, Subedi Parajuli S, Uchida Y, Zhou B. Preventive effects of polypropylene and jute fibers on spalling of UHPC at high temperatures in combination with waste porous ceramic fine aggregate as an internal curing material. Constr Build Mater. 2019; 206:219-225. https://doi.org/10.1016/j.conbuildmat.2019.02.056.
Open DOI Search in Google Scholar Back to article
Yu R, Spiesz P, Brouwers HJH. Effect of nano-silica on the hydration and microstructure development of ultra-high performance concrete (UHPC) with a low binder amount. Constr Build Mater. 2014; 65:140-150. https://doi.org/10.1016/j.conbuildmat. 2014.04.063.
Open DOI Search in Google Scholar Back to article
Qian D, Yu R, Shui Z, Sun Y, Jiang C, Zhou F, Ding M, Tong X, He Y. A novel development of green ultra-high performance concrete (UHPC) based on appropriate application of recycled cementitious material. J Clean Prod. 2020; 261:121231. https://doi.org/10.1016/J.JCLEPRO.2020.121231.
Open DOI Search in Google Scholar Back to article
Kheir J, Klausen A, Hammer TA, De Meyst L, Hilloulin B, Van Tittelboom K, Loukili A, De Belie N. Early age autogenous shrinkage cracking risk of an ultra-high performance concrete (UHPC) wall: modelling and experimental results. Eng Fract Mech. 2021; 257:108024. https://doi.org/10.1016/j.engfracmech.2021.108024.
Open DOI Search in Google Scholar Back to article
Li S, Tang L, Shi W, Zhong C. Experimental investigation on hydroabrasive erosion of steel fiber UHPC and rubber UHPC. Adv Mater Sci Eng. 2020; 2020:5920824. https://doi.org/10.1155/2020/5920824.
Open DOI Search in Google Scholar Back to article
Jia L, Fang Z, Huang Z, Pilakoutas K, Wang Q, Tan X. Flexural behavior of UHPC beams prestressed with external CFRP tendons. Appl Sci. 2021; 11:9189. https://doi.org/10.3390/app11199189.
Open DOI Search in Google Scholar Back to article
Kalifa P, Chéné G, Gallé C. High-temperature behaviour of HPC with polypropylene fibres—from spalling to microstructure. Cem Concr Res. 2001; 31:1487-1499. https://doi.org/10.1016/S0008-8846(01)00596-8.
Open DOI Search in Google Scholar Back to article
Noumowé A, Carré H, Daoud A, Toutanji H. High-strength self-compacting concrete exposed to fire test. J Mater Civ Eng. 2006; 18:754-758. https://doi.org/10.1061/(asce)0899-1561(2006)18:6(754).
Open DOI Search in Google Scholar Back to article
PhanL.Spalling and mechanical properties of high strength concrete at high temperature. Proc Concr under Sev Cond Fr. 2007; 1595-1608. http://fire.nist.gov/bfrlpubs/build07/art019.html (accessed December 26, 2021).
Search in Google Scholar Back to article
Chan SYN, X. Luo X, Sun W. Efect of high temperature and cooling regimes on the compressive strength and pore properties of high performance concrete. Constr Build Mater. 2000; 14:261-266. https://doi.org/10.1016/S0950-0618(00)00031-3.
Open DOI Search in Google Scholar Back to article
Aslani F, Bastami M Constitutive relationships for normal-and high-strength concrete at elevated temperatures. ACI Mater J. 2011; 108:355-364. https://doi.org/10.14359/51683106.
Open DOI Search in Google Scholar Back to article
Lau A, Anson M. Effect of high temperatures on high performance steel fibre reinforced concrete. Cem Concr Res. 2006; 36:1698-1707. https://doi.org/10.1016/j.cemconres.2006.03.024.
Open DOI Search in Google Scholar Back to article
Varona FB, Baeza FJ, Bru D, Ivorra S. Influence of high temperature on the mechanical properties of hybrid fibre reinforced normal and high strength concrete, Constr Build Mater. 2018; 159:73-82. https://doi.org/10.1016/J.CONBUILDMAT.2017.10.129.
Open DOI Search in Google Scholar Back to article
Mindess S, Young JF, Darwin DC. 2nd ed.; Upper Saddle River, NJ: Prentice-Hall; 2003.
Search in Google Scholar Back to article
Liu CT, Huang JS. Fire performance of highly flowable reactive powder concrete. Constr Build Mater. 23 (2009) 2072-2079. https://doi.org/10.1016/ j.conbuildmat.2008.08.022.
Open DOI Search in Google Scholar Back to article
Bazant ZP, Thonguthai W. Pore pressure and drying of concrete at high temperature. ASCE J Eng Mech Div. 1978; 104:1059-1079. https://doi.org/10.1061/jmcea3.0002404.
Open DOI Search in Google Scholar Back to article
Zohrevand P, Mirmiran P Behavior of ultrahigh-performance concrete confined by fiber-reinforced polymers. J Mater Civ Eng. 2011; 23:1727-1734. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000324.
Open DOI Search in Google Scholar Back to article
Mróz K, Hager I. Evaluation of nature and intensity of fire concrete spalling by frequency analysis of sound records. Cem Concr. Res. 2021; 148:106539. https://doi.org/10.1016/J.CEMCONRES.2021.106539.
Open DOI Search in Google Scholar Back to article
Abadel A, Elsanadedy H, Almusallam T, Alaskar A, Abbas H, Al-Salloum Y. Residual compressive strength of plain and fiber reinforced concrete after exposure to different heating and cooling regimes. 2021; 26:6746-6765.https://doi.org/10.1080/19648189.2021.1960898.
Open DOI Search in Google Scholar Back to article
Zhang D, Tan KH. Effect of various polymer fibers on spalling mitigation of ultra-high performance concrete at high temperature. Cem Concr Compos. 2020; 114: 103815. https://doi.org/10.1016/j.cemconcomp.2020.103815.
Open DOI Search in Google Scholar Back to article
Travis QB, Mobasher B. Correlation of elastic modulus and permeability in concrete subjected to elevated temperatures. J Mater Civ Eng. 2010; 22:735-740. https://doi.org/10.1061/(asce)mt.1943-5533.0000074.
Open DOI Search in Google Scholar Back to article
Gallé C, Sercombe J. Permeability and pore structure evolution of silico-calcareous and hematite high-strength concretes submitted to high temperatures. Mater Struct Constr. 2001; 34:619-628. https://doi.org/10.1617/13695.
Open DOI Search in Google Scholar Back to article
Wille K, Naaman AE, Parra-Montesinos GJ. Ultra-high performance concrete with compressive strength exceeding 150 MPa (22 ksi): a simpler way. ACI Mater J. 2011; 108:46–54. https://doi.org/10.14359/51664215.
Open DOI Search in Google Scholar Back to article
Richard P, Cheyrezy M. Composition of reactive powder concretes. Cem Concr Res. 1995; 25:1501–1511. https://doi.org/10.1016/0008-8846(95)00144-2.
Open DOI Search in Google Scholar Back to article
Klingsch EW, Frangi A, Fontana M. High- and ultrahigh-performance concrete: a systematic experimental analysis on spalling. Am Concr Institute, ACI Spec. Publ. 2011; 279:269–318.
Search in Google Scholar Back to article
Diederichs U, Mertzsch O. Behaviour of ultra high strength concrete at high temperatures. In: Kassel, Ed. Second International Symposium on Ultra High Performance Concrete. 2008, pp. 347–354.
Search in Google Scholar Back to article
Peng GF, Kang YR, Huang YZ, Liu XP, Chen Q. Experimental research on fire resistance of reactive powder concrete. Adv Mater Sci Eng. 2012. https://doi.org/10.1155/2012/860303.
Open DOI Search in Google Scholar Back to article
Varona FB, Baeza FJ, Bru D, Ivorra S. Influence of high temperature on the mechanical properties of hybrid fibre reinforced normal and high strength concrete, Constr Build Mater. 2018; 159:73–82. https://doi.org/10.1016/j.conbuildmat.2017.10.129.
Open DOI Search in Google Scholar Back to article
Bangi MR, Horiguchi T. Effect of fibre type and geometry on maximum pore pressures in fibre-reinforced high strength concrete at elevated temperatures. Cem Concr Res. 2012; 42:459–466. https://doi.org/10.1016/J.CEMCONRES.2011.11.014.
Open DOI Search in Google Scholar Back to article
Novák J, Kohoutková A. Fire response of hybrid fiber reinforced concrete to high temperature. Procedia Eng. 2017; 172:784–790. https://doi.org/10.1016/J.PR0ENG.2017.02.123.
Open DOI Search in Google Scholar Back to article
Heinz D, Ludwig H-M. Heat treatment and the risk of DEF delayed ettringite formation in UHPC. In: International Symposium on Ultra High Performance Concrete in Kassel, Germany. 2004; pp. 717–730.
Search in Google Scholar Back to article
Chen HJ, Yu YL, Tang CW. Mechanical properties of ultra-high performance concrete before and after exposure to high temperatures. Materials (Basel). 2020; 13:770. https://doi.org/10.3390/mal3030770.
Open DOI Search in Google Scholar Back to article
Tayeh B, Hadzima-nyarko M, Youssef M, Riad R, Defalla R, Hafez A. Behavior of ultra-high-performance concrete with hybrid synthetic fiber waste exposed to elevated temperatures. 2023; 13:129.
Search in Google Scholar Back to article
ISO, Elements of building construction - Part 1: General requirements. International Organization for Standardization, Geneva, Switzerland. 1999.
Search in Google Scholar Back to article
ASTM international, standard test method for slump of hydraulic-cement concrete. ASTM C143-10a. 2010; 13:1–4.
Search in Google Scholar Back to article
ASTM C138/C138M-17a, No title standard test method for density (unit weight), yield, and air content (gravimetric) of concrete. ASTM Int. 2017. https://doi.org/10.1520/C0138_C0138M-17A.
Open DOI Search in Google Scholar Back to article
ASTM-C39, standard test method for compressive strength of cylindrical concrete. Annu B ASTM Stand. 2021; 10:1520. https://doi.org/D.O.I:10.1520/C0039_C0039M-10.
Open DOI Search in Google Scholar Back to article
ASTM C469-02, standard test method for static modulus of elasticity and poisson’s ratio of concrete in compression. ASTM Stand. B. 2002; 04:1–5. http://portales.puj.edu.co/wjfajardo/mecanicadesolidos/laboratorios/astm/C469.pdf.
Search in Google Scholar Back to article
ASTM C496-96, standard test method for splitting tensile strength of cylindrical concrete specimens. Man Hydrocarb Anal 6th Ed. 2008; i:545-545–3.
Search in Google Scholar Back to article
A. C78/C78M-16, standard test method for flexural strength of concrete (using simple beam with third-point loading). ASTM Int. 2016. https://doi.org/10.1520/C0078_C0078M-16.
Open DOI Search in Google Scholar Back to article
Bisby LA, Chen JF, Li SQ, Stratford TJ, Cueva, Crossling K. Strengthening fire-damaged concrete by confinement with fibre-reinforced polymer wraps. Eng Struct. 2011; 33:3381–3391. https://doi.org/10.1016/J.ENGSTRUCT.2011.07.002.
Open DOI Search in Google Scholar Back to article
Abadel AA, Alharbi YR. Confinement effectiveness of CFRP strengthened ultra-high performance concrete cylinders exposed to elevated temperatures. Mater Sci. 2021; 39:478–490. https://doi.org/10.2478/MSP-2021-0040.
Open DOI Search in Google Scholar Back to article
Ju Y, Wang L, Liu H, Tian K. An experimental investigation of the thermal spalling of polypropylene-fibered reactive powder concrete exposed to elevated temperatures. Sci Bull. 2015; 60:2022–2040. https://doi.org/10.1007/S11434-015-0939-0.
Open DOI Search in Google Scholar Back to article
Novák J, Kohoutková A. Fibre reinforced concrete exposed to elevated temperature. IOP Conference Series Materials Science and Engineering. 2017; 246:012045. https://doi.org/10.1088/1757-899X/246/1/012045.
Open DOI Search in Google Scholar Back to article
Bangi MR, Horiguchi T. Effect of fibre type and geometry on maximum pore pressures in fibre-reinforced high strength concrete at elevated temperatures. Cem Concr Res. 2012; 42:459–466. https://doi.org/10.1016/j.cemconres.2011.11.014.
Open DOI Search in Google Scholar Back to article
Hager I, Zdeb T, Krzemié K. The impact of the amount of polypropylene fibres on spalling behaviour and residual mechanical properties of reactive powder concretes. MATEC Web Conference. 2013; 6:2003. https://doi.org/10.1051/matecconf/20130602003.
Open DOI Search in Google Scholar Back to article
Peng GF, Chan SYN, Anson M. Chemical kinetics of C-S-H decomposition in hardened cement paste subjected to elevated temperatures up to 800°C. 2015; 13:47–52. https://doi.org/10.1680/ADCR.2001.13.2.47.
Open DOI Search in Google Scholar Back to article
Scheinherrová L, Vejmelková E, Keppert M, Bezdička P Doleželová M, Krejsová J, Grzeszczyk S, Matuszek-Chmurowska A, Černý R. Effect of Cu-Zn coated steel fibers on high temperature resistance of reactive powder concrete. Cem Concr Res. 2019; 117:45–57. https://doi.org/10.1016/J.CEMCONRES.2018.12.008.
Open DOI Search in Google Scholar Back to article
Ramezani M, Dehghani A, Sherif MM. Carbon nanotube reinforced cementitious composites: a comprehensive review. Constr Build Mater. 2022; 315:125100. https://doi.org/10.1016/J.CONBUILDMAT.2021.125100.
Open DOI Search in Google Scholar Back to article
Abadel AA, Abbas H., Alshaikh IMH, Sennah K, Tuladhar R, Altheeb A, Alamri M. Experimental study on the effects of external strengthening and elevated temperature on the shear behavior of ultra-high-performance fiber-reinforced concrete deep beams. Structures. 2023; 49:943–957. https://doi.org/10.1016/j.istruc.2023.02.004.
Open DOI Search in Google Scholar Back to article
Ambily PS, Ravisankar K, Umarani C, Dattatreya JK. Iyer NR. Development of ultra-high-performance geopolymer concrete. Concr Res. 2014; 66:82–89. https://doi.org/10.1680/macr.13.00057.
Open DOI Search in Google Scholar Back to article
Peng NR, Bian SH, Guo ZQ, Zhao J, Peng XL, Jiang YC. Effect of thermal shock due to rapid cooling on residual mechanical properties of fiber concrete exposed to high temperatures. Constr Build Mater. 2008; 22:948–955. https://doi.org/10.1016/j.conbuildmat.2006.12.002.
Open DOI Search in Google Scholar Back to article
Zhang P, Zhang P, Wu J, Zhang Y, Guo J. Mechanical properties of polyvinyl alcohol fiber-reinforced cementitious composites after high-temperature exposure. Gels. 2022; 8:662. https://doi.org/10.3390/ GELS8100662.
Open DOI Search in Google Scholar Back to article
Wu Z, Shi C, He W, Wu L. Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete. Constr Build Mater. 2016; 103:8–14. https://doi.org/10.1016/ J.CONBUILDMAT.2015.11.028.
Open DOI Search in Google Scholar Back to article
Tahwia AM, Elgendy GM, Amin M. Durability and microstructure of eco-efficient ultra-high-performance concrete. Constr Build Mater. 2021; 303:124491. https://doi.org/10.1016/j.conbuildmat.2021.124491.
Open DOI Search in Google Scholar Back to article
Gong J, Ma Y, Fu J, Hu J, Ouyang X, Zhang Z, Wang H. Utilization of fibers in ultra-high performance concrete: a review. Compos Part B Eng. 2022; 241:109995. https://doi.org/10.1016/j.compositesb.2022.109995.
Open DOI Search in Google Scholar Back to article
Jiao C, Ta J, Niu Y, Meng S, Chen XF, He S, Ma R. Analysis of the flexural properties of ultra-high-performance concrete consisting of hybrid straight steel fibers. Case Stud Constr Mater. 2022; 17:e01153. https://doi.org/10.1016/J.CSCM.2022.E01153.
Open DOI Search in Google Scholar Back to article
Abid M, Hou X, Zheng W, Hussain RR. High temperature and residual properties of reactive powder concrete – a review. Constr Build Mater. 2017; 147:339–351. https://doi.org/10.1016/J.CONBUILDMAT.2017.04.083.
Open DOI Search in Google Scholar Back to article
Yoo D-Y, Banthia N, Lee J-Y, Yoon Y-S. Effect of fiber geometric property on rate dependent flexural behavior of ultra-high-performance cementitious composite. Cem Concr Compos. 2018; 86:57–71. https://doi.org/10.1016/j.cemconcomp.2017.11.002.
Open DOI Search in Google Scholar Back to article
Yoo DY, Shin W. Improvement of fiber corrosion resistance of ultra-high-performance concrete by means of crack width control and repair. Cem Concr Compos. 2021; 121:104073. https://doi.org/10.1016/J.CEMCONCOMP.2021.104073.
Open DOI Search in Google Scholar Back to article
Li Y, Tan KH, Yang EH. Synergistic effects of hybrid polypropylene and steel fibers on explosive spalling prevention of ultra-high performance concrete at elevated temperature. Cem Concr Compos. 2019; 96:174–181. https://doi.org/10.1016/J. CEMCONCOMP.2018.11.009.
Open DOI Search in Google Scholar Back to article
Ozawa M, Morimoto H. Effects of various fibres on high-temperature spalling in high-performance concrete. Constr Build Mater. 2014; 71:83–92. https://doi.org/10.1016/j.conbuildmat.2014.07.068.
Open DOI Search in Google Scholar Back to article
Xiao L, Chen P, Huang J, Peng S, Yang Z. Compressive behavior of reinforced steel-PVA hybrid fiber concrete short columns after high temperature exposure. Constr Build Mater. 2022; 342:127935. https://doi.org/10.1016/J.CONBUILDMAT.2022.127935.
Open DOI Search in Google Scholar Back to article
Xiao J, Falkner H. On residual strength of high-performance concrete with and without polypropylene fibres at elevated temperatures. Fire Saf J. 2006; 41:115–121. https://doi.org/10.1016/J.FIRESAF.2005.11.004.
Open DOI Search in Google Scholar Back to article
Zhang D, Tan KH, Dasari A, Weng Y. Effect of natural fibers on thermal spalling resistance of ultra-high performance concrete. Cem Concr Compos. 2020; 109:103512. https://doi.org/10.1016/j.cemconcomp.2020.103512.
Open DOI Search in Google Scholar Back to article

DOI: https://doi.org/10.2478/msp-2023-0010 | Journal eISSN: 2083-134X | Journal ISSN: 2083-1331

Journal RSS Feed

Language: English

Page range: 140 - 160

Submitted on: Mar 27, 2023

Accepted on: Jun 7, 2023

Published on: Aug 4, 2023

Published by: Sciendo

In partnership with: Paradigm Publishing Services

Publication frequency: 4 times per year

Keywords:

UHPC,

UHPFRC,

fibers,

concrete,

mechanical properties,

high temperature

Related subjects:

Materials sciences,

Materials sciences, other,

Nanomaterials,

Functional and smart materials,

Materials characterization and properties

© 2023 Aref A. Abadel, M. Iqbal Khan, Radhouane Masmoudi, published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Previous article Volume 41 (2023): Issue 1 (March 2023)Next article