References
- Durmus A, Kasgoz A, Ercan N, Akın D, Şanlı S. Effect of polyhedral oligomeric silsesquioxane (POSS) reinforced polypropylene (PP) nanocomposite on the microstructure and isothermal crystallization kinetics of polyoxymethylene (POM). Polym. 2012:53(23):5347–5357.
- Sun LH, Yang ZG, Li XH. Study on the friction and wear behavior of POM/Al2O3 nanocomposites. Wear. 2008;64:693–700.
- Joung-Man P, Zuo-Jia W, Dong-Jun K, Ga-Young G, Woo-Il L, Park J-K, et al. Compos Part B-Eng. 2012;43:2272–2278.
- Alexopoulos ND, Bartholome C, Poulin P, Marioli-Riga Z. Structural health monitoring of glass fiber reinforced composites using embedded carbon nanotube (CNT) fibers. Compos Sci Technol. 2010;70(2):260–271.
- Park JM, Kim PG, Jang JH, Wang ZJ, Kim W, Lee WI, et al. Lawrence DeVries. Self-sensing and dispersive evaluation of single carbon fiber/carbon nanotube (CNT)-epoxy composites using electro-micromechanical technique and nondestructive acoustic emission. Compos Part B-Eng. 2008;39(7–8):1170–1182.
- Srikanth I, Padmavathi N, Kumar S, Ghosal P, Kumar A, Subrahmanyam C. Mechanical, thermal and ablative properties of zirconia, CNT modified carbon/phenolic composites. Compos Sci Technol. 2013;80:1–7.
- Gao Y, Sun SY, He YD, Wang XD, Wu DZ. Effect of poly(ethylene oxide) on tribological performance and impact fracture behavior of polyoxymethylene/polytetrafluoroethylene fiber composites. Compos Part B-Eng. 2011;42(7):1945–1955.
- Sengupta R, Bhattacharya M, Bandyopadhyay S, Bhowmick AK. A review on the mechanical and electrical properties of graphite and modified graphite reinforced polymer composites. Prog Polym Sci. 2011;36(5):638–670.
- Kafi A, Huson M, Creighton C, Khoo J, Mazzola L, Gengenbach T, et al. Effect of surface functionality of PAN-based carbon fibres on the mechanical performance of carbon/epoxy composites. Compos Sci Technol. 2014;94:89–95.
- Park JM, Wang ZJ, Kwon DJ, Gu GY, Lee WI, Park JK. Lawrence DeVries. Optimum dispersion conditions and interfacial modification of carbon fiber and CNT–phenolic composites by atmospheric pressure plasma treatment. Compos Part B-Eng. 2012;43(5):2272–2278.
- Yang L, He X, Mei L, Tong L, Wang R, Li Y. Interfacial shear behavior of 3D composites reinforced with CNT-grafted carbon fibers. Compos Part A-Appl Sci Manuf. 2012;43(8):1410–1418.
- Lee JH, Rhee KY, Park SJ. Silane modification of carbon nanotubes and its effects on the material properties of carbon/CNT/epoxy three-phase composites. Compos Part A-Appl Sci Manuf. 2011;42(5):478–483.
- Sharma M, Bijwe J. Influence of fiber–matrix adhesion and operating parameters on sliding wear performance of carbon fabric polyethersulphone composites. Wear. 2011;271(11–12):2919–2927.
- Zhang X, Huang Y, Wang T. Plasma activation of carbon fibres for polyarylacetylene composites. Surf Coat Tech. 2007; 201(9):4965–4968.
- Wang J, Li KX, He HW, Wang JL, Sun GH. Kinetic and thermodynamics analysis of water absorption in unidirectional fiber reinforced composites by polyethersulphone and polyphenylene sulfide. Colloid Surf A. 2011;377(1–3):330–335.
- Zhou XH, Sun YS, Wang WS. Influences of carbon fabric/epoxy composites fabrication process on its friction and wear properties. J Mater Process Tech. 2009;209(9):4553–4557.
- Thunga M, Lio WY, Akinc M, Kessler MR. Adhesive repair of bismaleimide/carbon fiber composites with bisphenol E cyanate ester. Compos Sci Technol. 2011;71(2):239–245.
- Park JM, Kim JW, Yoon DJ. Interfacial evaluation and microfailure mechanisms of single carbon fiber/bismaleimide (BMI) composites by tensile and compressive fragmentation tests and acoustic emission. Compos Sci Technol. 2002;62:743–756.
- Liu F, Wang S, Zhang M, Ma M, Wang C, Li J. Improvement of mechanical robustness of the superhydrophobic wood surface by coating PVA/SiO2 composite polymer. Appl Surf Sci. 2013;280:686–692.
- Jiang S, Luo C, Zhang P, Wen Z, Cai P. Integrated preparation and verification of carbon fiber/polyimide composite rudder surface based on RTM technology. Acta Materiae Compositae Sinica. 2020:37(9):2152–2162. doi:10.13801/j.cnki.fhclxb.20200429.002.