Surface roughness analysis of prepolymerized CAD/CAM dental acrylic resins following combined surface treatments
References
- Anusavice KJ, Shen C, Rawls HR, editors. Phillips’ science of dental materials. 12th ed. Philadelphia, U S A: Saunders; 2012.
- Kanazawa M, Inokoshi M, Minakuchi S, Ohbayashi N. Trial of a CAD/CAM system for fabricating complete dentures. Dent Mater J. 2011;30:93–6.
- Mahross HZ, Mohamed MD, Hassan AM, Baroudi K. Effect of cigarette smoke on surface roughness of different denture base materials. J Clin Diagn Res. 2015;9(9):ZC39–42.
- Al-Dwairi ZN, Al-Quran FA, Al-Omari OY. The effect of antifungal agents on surface properties of poly(methyl methacrylate) and its relation to adherence of Candida albicans. J Prosthodont Res. 2012;56(4):272–80.
- Takahashi Y, Yoshida K, Shimizu H. Fracture resistance of maxillary complete dentures subjected to long-term water immersion. Gerodontology. 2012;29(2):e1086–91.
- Bidra AS, Farrell K, Burnham D, Dhingra A, Taylor TD, Kuo CL. Prospective cohort pilot study of 2-visit CAD/CAM monolithic complete dentures and implant-retained overdentures: Clinical and patient-centered outcomes. J Prosthet Dent. 2016;115(5):578–86.
- AlHelal A, AlRumaih HS, Kattadiyil MT, Baba NZ, Goodacre CJ. Comparison of retention between maxillary milled and conventional denture bases: A clinical study. J Prosthet Dent. 2017;117(2):233–8.
- Steinmassl PA, Wiedemair V, Huck C, Klaunzer F, Steinmassl O, Grunert I, et al. Do CAD/CAM dentures really release less monomer than conventional dentures? Clin Oral Investig. 2017;21(5):1697–705.
- Paranhos HF, Silva-Lovato CH, Souza RF, Cruz PC, Freitas KM, Peracini A. Effects of mechanical and chemical methods on denture biofilm accumulation. J Oral Rehabil. 2007;34(8):606–12.
- Keng SB, Lim M. Denture plaque distribution and the effectiveness of a perborate-containing denture cleanser. Quintessence Int. 1996;27(5):341–5.
- Haselden CA, Hobkirk JA, Pearson GJ, Davies EH. A comparison between the wear resistance of three types of denture resin to three different dentifrices. J Oral Rehabil. 1998;25(5):335–9.
- Peracini A, Davi LR, de Queiroz Ribeiro N, de Souza RF, da Silva CH, Paranhos HD. Effect of denture cleansers on physical properties of heat-polymerized acrylic resin. J Prosthodont Res. 2010;54(2):78–83.
- Schwindling FS, Rammelsberg P, Stober T. Effect of chemical disinfection on the surface roughness of hard denture base materials: A systematic literature review. Int J Prosthodont. 2014;27(3):215–25.
- Ellepola AN, Samaranayake LP. Oral candidal infections and antimycotics. Crit Rev Oral Biol Med. 2000;11(2):172–98.
- Machado AL, Giampaolo ET, Pavarina AC, Jorge JH, Vergani CE. Surface roughness of denture base and reline materials after disinfection by immersion in chlorhexidine or microwave irradiation. Gerodontology. 2012;29(2):e375–82.
- Aoun G, Saadeh M, Berberi A. Effectiveness of hexetidine 0.1% compared to chlorhexidine digluconate 0.12% in eliminating Candida albicans colonizing dentures: A Randomized Clinical in Vivo Study. J Int Oral Health. 2015;7(8):5–8.
- Orsi IA, Junior AG, Villabona CA, Fernandes FH, Ito IY. Evaluation of the efficacy of chemical disinfectants for disinfection of heat-polymerised acrylic resin. Gerodontology. 2011;28(4):253–7.
- Bollen CM, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: A review of the literature. Dent Mater. 1997;13(4):258–69.
- Alp G, Johnston WM, Yilmaz B. Optical properties and surface roughness of prepolymerized poly(methyl methacrylate) denture base materials. J Prosthet Dent. 2019;121(2):347–52.
- Al-Dwairi ZN, Tahboub KY, Baba NZ, Goodacre CJ, Özcan M. A comparison of the surface properties of CAD/CAM and Conventional Polymethylmethacrylate (PMMA). J Prosthodont. 2019;28(4):452–7.
- Baysan A, Sleibi A, Ozel B, Anderson P. The quantification of surface roughness on root caries using noncontact optical profilometry–An in vitro study. Lasers Dent Sci. 2018;2(4):229–37.
- Uppal M, Ganesh A, Balagopal S, Kaur G. Profilometric analysis of two composite resins’ surface repolished after tooth brush abrasion with three polishing systems. J Conserv Dent. 2013;16(4):309–13.
- Schätzle M, Sener B, Schmidlin PR, Imfeld T, Attin T. In vitro tooth cleaning efficacy of electric toothbrushes around brackets. Eur J Orthodont. 2010;32(5):481–9.
- ISO/TR-14569-1:2007. Dental materials-Guidance on testing of wear-Part 1: Wear by toothbrushing. Geneva: International Organization for Standardization; 2007.
- Hooper S, West NX, Pickles MJ, Joiner A, Newcombe RG, Addy M. Investigation of erosion and abrasion on enamel and dentine: A model in situ using toothpastes of different abrasivity. J Clin Periodontol. 2003;30(9):802–8.
- Gale MS, Darvell BW. Thermal cycling procedures for laboratory testing of dental restorations. J Dent. 1999;27(2):89–99.
- Ayaz EA, Ustun S. Effect of staining and denture cleaning on color stability of differently polymerized denture base acrylic resins. Niger J Clin Pract. 2020;23(3):304–9.
- Asiry MA, AlShahrani I, Almoammar S, Durgesh BH, Al Kheraif AA, Hashem MI. Influence of epoxy, polytetrafluoroethylene (PTFE) and rhodium surface coatings on surface roughness, nano-mechanical properties and biofilm adhesion of nickel titanium (Ni-Ti) archwires. Mater Res Express. 2018;5(2):026511.
- Kohli S, Bhatia S. Polyamides in dentistry-A Review. Int J Sci Study. 2013;1(1):20–5.
- Radford D, Challacombe SJ, Walter JD. Denture plaque and adherence of Candida albicans to denture-base materials in vivo and in vitro. Crit Rev Oral Biol Med. 1999;10(1):99–116.
- Zissis AJ, Polyzois GL, Yannikakis SA, Harrison A. Roughness of denture materials: A comparative study. Int J Prosthodont. 2000;13(2):136–40.
- Ayman AD. The residual monomer content and mechanical properties of CAD CAM resins used in the fabrication of complete dentures as compared to heat cured resins. Electron Phys. 2017;9(7):4766.
- Kattadiyil MT, Jekki R, Goodacre CJ, Baba NZ. Comparison of treatment outcomes in digital and conventional complete removable dental prosthesis fabrications in a predoctoral setting. J Prosthet Dent. 2015;114(6):818–25.
- Cortés-Sandoval G, Martínez-Castañón GA, Patiño-Marín N, Martínez-Rodríguez PR, Loyola-Rodríguez JP. Surface roughness and hardness evaluation of some base metal alloys and denture base acrylics used for oral rehabilitation. Mater Lett. 2015;144:100–5.
- Bidra AS, Taylor TD, Agar JR. Computer-aided technology for fabricating complete dentures: Systematic review of historical background, current status, and future perspectives. J Prosthet Dent. 2013;109(6):361–6.
- Shinawi LA. Effect of denture cleaning on abrasion resistance and surface topography of polymerized CAD CAM acrylic resin denture base. Electron Phys. 2017;9(5):4281–88.
- Felton D, Cooper L, Duqum I, Minsley G, Guckes A, Haug S, et al. Evidence-based guidelines for the care and maintenance of complete dentures. J Prosthodont. 2011;20:S1–2.
- Arruda CN, Sorgini DB, Oliveira VD, Macedo AP, Lovato CH, Paranhos HD. Effects of denture cleansers on heat-polymerized acrylic resin: A five-year-simulated period of use. Br Dent J. 2015;26:404–8.
- Brozek R, Rogalewicz R, Koczorowski R, Voelkel A. The influence of denture cleansers on the release of organic compounds from soft lining materials. J Environ Monit. 2008;10(6):770–4.
- Davi LR, Felipucci DN, Souza RF, Bezzon OL, Lovato-Silva CH, Pagnano VO, et al. Effect of denture cleansers on metal ion release and surface roughness of denture base materials. Br Dent J. 2012;23(4):387–93.
- Pereira CJ, Genari B, Leitune VC, Collares FM, Samuel SM. Effect of immersion in various disinfectant solutions on the properties of a heat-cured acrylic resin. Re-vista Gaúcha de Odontologia. 2019;67:e20190052.
- Unlü A, Altay OT, Sahmali S. The role of denture cleansers on the whitening of acrylic resins. Int J Prosthodont. 1996;9(3):266–70.
- Salles MM, Oliveira VD, Souza RF, Silva CH, Paranhos HD. Antimicrobial action of sodium hypochlorite and castor oil solutions for denture cleaning in vitro evaluation. Br Oral Res. 2015;29:1–6.
Language: English
Page range: 209 - 218
Submitted on: May 3, 2021
Accepted on: Aug 17, 2021
Published on: Oct 14, 2021
Published by: Wroclaw University of Science and Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Related subjects:
© 2021 Afnan Alfouzan, Alhanouf Alnouwaisar, Njood Alazzam, Hanan AL-Otaibi, Nawaf Labban, Mashaal Alswaidan, Sara AL-Taweel, Huda Alshehri, published by Wroclaw University of Science and Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.