Investigating the Effects of PU-Based Back-Coating with Boric Acid and Titanium Dioxide Additives on Flame Retardancy Levels and Comfort Properties of 100% Cotton Denim Fabric

Öztürkmen, Ebru; Güneşoğlu, Cem; Topalbekiroğlu, Mehmet

doi:10.2478/ftee-2024-0027

Abstract

This study aimed to develop a cost-effective and resource-efficient application to enhance the thermal stability, flame retardancy, self-cleaning, and antibacterial properties of cotton denim fabrics through a single-step, flexible, and simple polyurethane (PU) based back-coating method, ultimately increasing the use of denim fabrics in daily and work clothes thanks to the increased functionality. This method utilizes boric acid (H₃BO₃) and a binary composite of H₃BO₃-titanium dioxide (TiO₂) as functional additives while considering comfort parameters. Limiting oxygen index (LOI) and vertical burning tests were conducted to explore the thermal stability and flame retardancy of the samples, while assessments of air permeability, water vapour permeability, thermal resistance, and thermal absorptivity were performed to investigate the comfort properties. Comparing two kinds of back-coated denim fabrics, H₃BO₃-TiO₂ back-coated cotton fabric showed the best flame retardancy with the lowest char length (45 mm) and highest LOI (27%). The air permeability values of back-coated fabrics decreased by approximately half compared to the untreated denim fabric. Although the water vapour permeability values decreased, they were less affected by the coating. Coating application reduced thermal conductivity and thermal absorbency, resulting in more thermally resistant denim fabric. This study demonstrates the potential utility of a PU-based coating incorporating TiO₂ and H₃BO₃ on traditional cotton denim fabrics to enhance flame resistance while minimizing any adverse effects on the overall thermal comfort of the fabric.

References

Adamu BF. Permeability and Moisture Management Properties of Denim Fabric Made from Cotton, Spandex, and Polyester. J Inst Eng India Ser E 2022;103:253–8. https://doi.org/10.1007/s40034-022-00249-1.
Search in Google Scholar Back to article
Becenen N, Eyi G. Investigation of the flammability properties of a cotton and elastane blend denim fabric in the presence of boric acid, borax, and nano-SiO2. J Text Inst 2021;112:1080–92. https://doi.org/10.1080/00405000.2020.1800974.
Search in Google Scholar Back to article
Periyasamy AP, Militky J. Denim and consumers’ phase of life cycle. In: Muthu SS, editor. Sustain. Denim, Sawston: Woodhead; 2017, p. 257–82. https://doi.org/10.1016/B978-0-08-102043-2.00010-1.
Search in Google Scholar Back to article
Becenen N, Erdoğan S. Chitosan and nano-TiO2 coating improves the flame retardancy of dyed and undyed denim fabrics by increasing the charring. J Ind Text 2022;51:1252S–1278S. https://doi.org/10.1177/15280837221099632.
Search in Google Scholar Back to article
Talebi S, Montazer M. Denim Fabric with Flame retardant, hydrophilic and self-cleaning properties conferring by in-situ synthesis of silica nanoparticles. Cellulose 2020;27:6643–61. https://doi.org/10.1007/s10570-020-03195-6.
Search in Google Scholar Back to article
Liu Y, Wang X, Qi K, Xin JH. Functionalization of cotton with carbon nanotubes. J Mater Chem 2008;18:3454–60. https://doi.org/10.1039/b801849a.
Search in Google Scholar Back to article
Javed A, Wiener J, Saskova J, Müllerová J. Zinc Oxide Nanoparticles (ZnO NPs) and N-Methylol Dimethyl Phosphonopropion Amide (MDPA) System for Flame Retardant Cotton Fabrics. Polymers 2022;14:3414. https://doi.org/10.3390/polym14163414.
Search in Google Scholar Back to article
Ling C, Guo L, Wang Z. A review on the state of flame-retardant cotton fabric: Mechanisms and applications. Ind Crops Prod 2023;194:116264. https://doi.org/10.1016/j.indcrop.2023.116264.
Search in Google Scholar Back to article
Zhang K, Zong L, Tan Y, Ji Q, Yun W, Shi R, et al. Improve the flame retardancy of cellulose fibers by grafting zinc ion. Carbohydr Polym 2016;136:121–7. https://doi.org/10.1016/j.carbpol.2015.09.026.
Search in Google Scholar Back to article
Abed A, Bouazizi N, Giraud S, El Achari A, Campagne C, Vieillard J, et al. Functional Cotton Fabric: Enhancement in Flame Retardancy and Thermal Stability. Int J Nanoparticles Nanotechnol 2020;6:1–13. https://doi.org/10.35840/2631-5084/5537.
Search in Google Scholar Back to article
Attia N, Ahmed H, Yehia D, Hassan M, Zaddin Y. Novel synthesis of nanoparticles-based back coating flame-retardant materials for historic textile fabrics conservation. J Ind Text 2017;46:1379–92. https://doi.org/10.1177/1528083715619957.
Search in Google Scholar Back to article
Wang Q, Undrell JP, Gao Y, Cai G, Buffet J-C, Wilkie CA, et al. Synthesis of Flame-Retardant Polypropylene/LDH-Borate Nanocomposites. Macromolecules 2013;46:6145–50. https://doi.org/10.1021/ma401133s.
Search in Google Scholar Back to article
Zhou C, Zhou S, You F, Wang Z, Li D, Li G, et al. Effectively improving flame retardancy levels of finished cotton fabrics only by simple binary silicon-boron oxide sols. J Polym Res 2023;30:437. https://doi.org/10.1007/s10965-023-03812-5.
Search in Google Scholar Back to article
Akarslan F. Investigation on Fire Retardancy Properties of Boric Acid Doped Textile Materials. Acta Phys Pol A 2015;128:B-403–B-405. https://doi.org/10.12693/APhysPolA.128.B-403.
Search in Google Scholar Back to article
Qiu X, Li Z, Li X, Zhang Z. Flame retardant coatings prepared using layer by layer assembly: A review. Chem Eng J 2018;334:108–22. https://doi.org/10.1016/j.cej.2017.09.194.
Search in Google Scholar Back to article
Duan H, Li J, Gu J, Lu L, Qi D. Onepot preparation of cotton fibers with simultaneous enhanced durable flame-retardant and antibacterial properties by grafting copolymerized with vinyl monomers. React Funct Polym 2022;181:105438. https://doi.org/10.1016/j.reactfunctpolym.2022.105438.
Search in Google Scholar Back to article
Ayesh M, Horrocks AR, Kandola BK. The Effect of Combined Atmospheric Plasma/UV Treatments on Improving the Durability of Flame Retardants Applied to Cotton. Molecules 2022;27:8737. https://doi.org/10.3390/molecules27248737.
Search in Google Scholar Back to article
Bentis A, Boukhriss A, Gmouh S. Flame-retardant and water-repellent coating on cotton fabric by titania–boron sol–gel method. J Sol-Gel Sci Technol 2020;94:719–30. https://doi.org/10.1007/s10971-020-05224-z.
Search in Google Scholar Back to article
Zope IS, Foo S, Seah DGJ, Akunuri AT, Dasari A. Development and Evaluation of a Water-Based Flame Retardant Spray Coating for Cotton Fabrics. ACS Appl Mater Interfaces 2017;9:40782–91. https://doi.org/10.1021/acsami.7b09863.
Search in Google Scholar Back to article
Nosaka T, Lankone R, Westerhoff P, Herckes P. Flame retardant performance of carbonaceous nanomaterials on polyester fabric. Polym Test 2020;86:106497. https://doi.org/10.1016/j.polymertesting.2020.106497.
Search in Google Scholar Back to article
Bhuiyan MAR, Wang L, Shanks RA, Ding J. Polyurethane–superabsorbent polymer-coated cotton fabric for thermophysiological wear comfort. J Mater Sci 2019;54:9267–81. https://doi.org/10.1007/s10853-019-03495-8.
Search in Google Scholar Back to article
Bhuiyan MAR, Wang L, Anjuman Ara Z, Saha T, Wang X. Omniphobic polyurethane – superabsorbent polymer – fluoropolymer surface coating on cotton fabric for chemical protection and thermal comfort. J Ind Text 2022;51:6590S–6611S. https://doi.org/10.1177/15280837221078535.
Search in Google Scholar Back to article
Liang S, Neisius NM, Gaan S. Recent developments in flame retardant polymeric coatings. Prog Org Coat 2013;76:1642–65. https://doi.org/10.1016/j.porgcoat.2013.07.014.
Search in Google Scholar Back to article
Ortelli S, Malucelli G, Cuttica F, Blosi M, Zanoni I, Costa AL. Coatings made of proteins adsorbed on TiO2 nanoparticles: a new flame retardant approach for cotton fabrics. Cellulose 2018;25:2755–65. https://doi.org/10.1007/s10570-018-1745-z.
Search in Google Scholar Back to article
Horrocks AR. Overview of traditional flame retardant solutions including coating and back-coating technologies. In: Alongi J, Horrocks AR, Carosio F, Malucelli G, editors. Update Flame Retard. Text. State Art Environ. Issues Innov. Solut., Shawburry, UK: Smithers Rapra; 2013, p. 123–78.
Search in Google Scholar Back to article
Özer MS, Wesemann M-J, Gaan S. Flame retardant back-coated PET fabric with DOPO-based environmentally friendly formulations. Prog Org Coat 2023;175:107363. https://doi.org/10.1016/j.porgcoat.2022.107363.
Search in Google Scholar Back to article
Yao Z, Liu X, Qian L, Chen Y, Xu B, Qiu Y. Synthesis and Characterization of Aluminum 2-Carboxyethyl-Phenyl-Phosphinate and Its Flame-Retardant Application in Polyester. Polymers 2019;11:1969. https://doi.org/10.3390/polym11121969.
Search in Google Scholar Back to article
Sun Y, Liu C, Hong Y, Liu R, Zhou X. Synthesis and application of self-crosslinking and flame retardant waterborne polyurethane as fabric coating agent. Prog Org Coat 2019;137:105323. https://doi.org/10.1016/j.porgcoat.2019.105323.
Search in Google Scholar Back to article
Gite VV, Mahulikar PP, Hundiwale DG. Preparation and properties of polyurethane coatings based on acrylic polyols and trimer of isophorone diisocyanate. Prog Org Coat 2010;68:307–12. https://doi.org/10.1016/j.porgcoat.2010.03.008.
Search in Google Scholar Back to article
Havlova M. Air Permeability, Water Vapour Permeability And Selected Structural Parameters Of Woven Fabrics. Fibres Text 2020;27:12–8.
Search in Google Scholar Back to article
Eryuruk SH. The effects of elastane and finishing properties on wicking, drying and water vapour permeability properties of denim fabrics. Int J Cloth Sci Technol 2019;32:208–17. https://doi.org/10.1108/IJCST-01-2019-0003.
Search in Google Scholar Back to article
Gültekin E, Çelik Hİ, Nohut S, Elma SK. Predicting air permeability and porosity of nonwovens with image processing and artificial intelligence methods. J Text Inst 2020;111:1641–51. https://doi.org/10.1080/00405000.2020.1727267.
Search in Google Scholar Back to article
Berkalp ÖB. Air Permeability & Porosity in Spun-laced Fabrics. Fibres Text East Eur 2006;14:81–5.
Search in Google Scholar Back to article
Güneşoğlu S. The statistical investigation of the effect of hydrophilic polyurethane coating on various properties of denim fabric. Tekst Ve Konfeksiyon 2015;25:256–62.
Search in Google Scholar Back to article
Mondal S, Hu JL. A novel approach to excellent UV protecting cotton fabric with functionalized MWNT containing water vapor permeable PU coating. J Appl Polym Sci 2007;103:3370–6. https://doi.org/10.1002/app.25437.
Search in Google Scholar Back to article
Ozen I. Multi-layered Breathable Fabric Structures with Enhanced Water Resistance. J Eng Fibers Fabr 2012;7:63–9. https://doi.org/10.1177/155892501200700402.
Search in Google Scholar Back to article
Lubnin A, Anderle G, Snow G, Varn R, Lenhard S. Novel, “breathable” polyurethane dispersions. Paint Coat Ind 2005;21:26–35.
Search in Google Scholar Back to article
Wei B, Xu F, Azhar SW, Li W, Lou L, Liu W, et al. Fabrication and property of discarded denim fabric/polypropylene composites. J Ind Text 2015;44:798–812. https://doi.org/10.1177/1528083714550055.
Search in Google Scholar Back to article
Hu X, Tian M, Qu L, Zhu S, Han G. Multifunctional cotton fabrics with graphene/polyurethane coatings with far-infrared emission, electrical conductivity, and ultraviolet-blocking properties. Carbon 2015;95:625–33. https://doi.org/10.1016/j.carbon.2015.08.099.
Search in Google Scholar Back to article
Potočić Matković VM, Čubrić IS, Skenderi Z. Thermal resistance of polyurethane-coated knitted fabrics before and after weathering. Text Res J 2014;84:2015–25. https://doi.org/10.1177/0040517514537368.
Search in Google Scholar Back to article
Gurudatt K, De P, Sarkar RK, Bardhan MK. Studies on Influence of Blowing Agent in Polymeric Coating Formulations on Thermal Resistance of Coated Textiles. J Ind Text 2001;31:103–22. https://doi.org/10.1106/LN83-8YPN-TAXA-MMMM.
Search in Google Scholar Back to article
Abbas A, Zhao Y, Ali U, Lin T. Improving heat-retaining property of cotton fabrics through surface coatings. J Text Inst 2017;108:1808–14. https://doi.org/10.1080/00405000.2017.1292638.
Search in Google Scholar Back to article
Souza JM, Sampaio S, Silva WC, De Lima SG, Zille A, Fangueiro R. Characterization of functional single jersey knitted fabrics using non-conventional yarns for sportswear. Text Res J 2018;88:275–92. https://doi.org/10.1177/0040517516677226.
Search in Google Scholar Back to article
Mangat MM, Hes L. Comfort aspects of denim garments. In: Paul R, editor. Denim Manuf. Finish. Appl., Woodhead Publishing; 2015, p. 461–79. https://doi.org/10.1016/B978-0-85709-843-6.00015-9.
Search in Google Scholar Back to article
Lewis DM, Hawkes JA, Hawkes L, Mama J. A new approach to flame-retardant cellulosic fabrics in an environmentally safe manner. Color Technol 2020;136:512–25. https://doi.org/10.1111/cote.12504.
Search in Google Scholar Back to article
Younis AA. Evaluation of the flammability and thermal properties of a new flame retardant coating applied on polyester fabric. Egypt J Pet 2016;25:161–9. https://doi.org/10.1016/j.ejpe.2015.04.001.
Search in Google Scholar Back to article
Martín C, Ronda JC, Cádiz V. Boron-containing novolac resins as flame retardant materials. Polym Degrad Stab 2006;91:747–54. https://doi.org/10.1016/j.polymdegradstab.2005.05.025.
Search in Google Scholar Back to article
Poon C, Kan C. Effects of TiO2 and curing temperatures on flame retardant finishing of cotton. Carbohydr Polym 2015;121:457–67. https://doi.org/10.1016/j.carbpol.2014.11.064.
Search in Google Scholar Back to article

Investigating the Effects of PU-Based Back-Coating with Boric Acid and Titanium Dioxide Additives on Flame Retardancy Levels and Comfort Properties of 100% Cotton Denim Fabric

Abstract

Paradigm

My account