Coupling Characteristics of Needles and Backing Cloth During the Carpet Tufting Process

Yang Xu; Shuang Huang; Xiaowei Sheng; Sun Zhijun

doi:10.2478/ftee-2022-0017

.blurhash-client-img { display: none !important; }

Coupling Characteristics of Needles and Backing Cloth During the Carpet Tufting Process

Fibres & Textiles in Eastern Europe

Volume 30 (2022): Issue 3 (October 2022)

By: Yang Xu, Shuang Huang, Xiaowei Sheng and Sun Zhijun

Open Access

|Sep 2022

Abstract

Focusing on the needle and backing cloth on a tufting machine type DHG801D-200, a finite element model was built using ABAQUS/Explicit software. The tufting processes, in which the individual tufting needles and 1/10 needle modules puncture the polypropylene woven and nonwoven fabrics (hot-air bonded nonwoven and thermo-calender bonded nonwoven), were simulated, respectively. Finally, the needle forces were estimated, and the deformations and stress field distribution of the backing cloth at different times were analysed.

References

Meng, Z., Sun, J. J., Zhou, T. Z., & Gu, S. H. (2008). Research on the Influence that Stop Position of Carpet Tufting Machine to Yarn Tension and the Method of Elimination Stop Mark. Key Engineering Materials, 375–376, 724–728.
Open DOI Search in Google Scholar Back to article
Xue, S. (2003). Machine-made carpet. Beijing: Chemical Industry Press.
Search in Google Scholar Back to article
Gotlih, K. (1997). Sewing needle penetration force study. International Journal of Clothing Science & Technology, 9 (3), 241–248.
Open DOI Search in Google Scholar Back to article
Haghighat, E., Etrati, S. M., & Najar, S. S. (2013). Modeling of needle penetration force in denim fabric. International Journal of Clothing Science & Technology, 25(25), 361–379.
Open DOI Search in Google Scholar Back to article
Haghighat, E., Etrati, S. M., Najar, S. S., & Shamsi, M. (2015). Theoretical prediction of the needle penetration force in denim fabric part 1: Yarn tensile extension component. International Journal of Clothing Science & Technology, 27(3), 397–416.
Open DOI Search in Google Scholar Back to article
Carvalho, H., Rocha, A. M., & Monteiro, J. L. (2009). Measurement and analysis of needle penetration forces in industrial high-speed sewing machine. Journal of the Textile Institute, 100(4), 319–329.
Open DOI Search in Google Scholar Back to article
Lomov, S. V. (1998). A predictive model for the penetration force of a woven fabric by a needle. International Journal of Clothing Science & Technology, 10(2), 91–103.
Open DOI Search in Google Scholar Back to article
Mallet, E., & Du, R. (2013). Finite element analysis of sewing process. International Journal of Clothing Science & Technology, 11(11), 19–36.
Open DOI Search in Google Scholar Back to article
Goda I., & Girardot J. (2021). Numerical modeling and analysis of the ballistic impact response of ceramic/composite targets and the influence of cohesive material parameters. International Journal of Damage Mechanics, 30(7):1079–1122.
Open DOI Search in Google Scholar Back to article
Elias A., Laurin F., Kaminski M. & Gornet L. (2017). Experimental and numerical investigations of low energy/velocity impact damage generated in 3D woven composite with polymer matrix. Composite Structures, 159, 228–239.
Open DOI Search in Google Scholar Back to article
Wu Z.Y., Zhang L. C., Ying Z.P., Ke J., & Hu X. D. (2020). Low-velocity impact performance of hybrid 3D carbon/glass woven orthogonal composite: Experiment and simulation. Composites Part B: Engineering, 196(1): 1–14.
Open DOI Search in Google Scholar Back to article
Haque B. Z., & Gillespie J. W. (2021). Perforation mechanics of UHMWPE soft ballistic sub-laminate and soft ballistic armor pack: A finite element study. Journal of thermoplastic composite materials, 1–29 (online).
Open DOI Search in Google Scholar Back to article
Zhang R., Qiang L. S., Han B., Zhao Z.Y., Zhang Q. C., Ni C. Y., & Lu T. J. (2020). Ballistic performance of uhmwpe laminated plates and uhmwpe encapsulated aluminum structures: numerical simulation. Composite Structures, 252: 112686.
Open DOI Search in Google Scholar Back to article
Yiping Shi, Y. Z. (2006). Finite element analysis of detailed examples using ABAQUS. Beijing: Mechanical Engineering Press.
Search in Google Scholar Back to article
Wang, P., Ma, Q., & Sun, B. (2011). Finite element modelling of woven fabric tearing damage. Textile Research Journal, 81(12):1273–1286.
Open DOI Search in Google Scholar Back to article
Masoumeh V., Stepan L., & Sayed A. (2010). Finite element modeling of a yarn pullout test for plain woven fabrics. Textile Research Journal, 80(10):892–903.
Open DOI Search in Google Scholar Back to article
Ding, C. H., Zhang, S. P., & Sun, Y. Z. (2006). Kinematical analysis of the needle's driving mechanism within a carpet tufting machine. Journal of Textile Research, 27(5), 37–40.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/ftee-2022-0017 | Journal eISSN: 2300-7354 | Journal ISSN: 1230-3666

Journal RSS Feed

Language: English

Page range: 9 - 17

Published on: Sep 28, 2022

Published by: Łukasiewicz Research Network-Łódź Institute of Technology

In partnership with: Paradigm Publishing Services

Publication frequency: Volume open

Keywords:

tufted carpet,

finite element model,

needle force,

deformation of backing cloth

Related subjects:

Business and economics,

Business management,

Business informatics,

Process management,

Industrial chemistry,

Cellulose, paper and textiles,

Polymer science and technology,

Materials sciences,

Biomaterials and natural materials

© 2022 Yang Xu, Shuang Huang, Xiaowei Sheng, Sun Zhijun, published by Łukasiewicz Research Network-Łódź Institute of Technology
This work is licensed under the Creative Commons Attribution 3.0 License.

Volume 30 (2022): Issue 3 (October 2022)