References
- Agarwal, B. D., Patro, B. S., & Kumar, P. (1984). J integral as fracture criterion for short fibre composites: An experimental approach. Engineering Fracture Mechanics, 19(4), 675–684. https://doi.org/10.1016/0013-7944(84)90100-0
- Anderson, T. L. (2017). Fracture Mechanics: Fundamentals and Applications (4th ed.). CRC Press. https://doi.org/10.1201/9781315370293
- Fageehi, Y. A., & Alshoaibi, A. M. (2024). Investigating the influence of holes as crack arrestors in simulating crack growth behavior using finite element method. Applied Sciences, 14(2), 897. https://doi.org/10.3390/app14020897
- Judt, P. O., Zarges, J.-C., Feldmann, M., Ricoeur, A., & Heim, H.-P. (2019). Deflecting Mode-I cracks in anisotropic materials. Mechanics of Materials, 136, 103060. https://doi.org/10.1016/j.mechmat.2019.05.007
- Khatri, K., & Lal, A. (2018). Stochastic XFEM based fracture behavior and crack growth analysis of a plate with a hole emanating cracks under biaxial loading. Theoretical and Applied Fracture Mechanics, 96, 1–22. https://doi.org/10.1016/j.tafmec.2018.03.009
- Moës, N., Dolbow, J., & Belytschko, T. (1999). A finite element method for crack growth without remeshing. International Journal for Numerical Methods in Engineering, 46(1), 131–150. https://doi.org/10.1002/(SICI)1097-0207(19990910)46:1<;131::AID-NME726>3.0.CO;2-J
- Mouritz, A. P., & Gibson, A. G. (2006). Fire Properties of Polymer Composite Materials. Springer. https://doi.org/10.1007/978-1-4020-5356-6
- Murakami, Y. (Ed.). (1987). Stress Intensity Factors Handbook [2 volumes]. Pergamon Press. https://doi.org/10.1002/zamm.19880680637
- Ousset, Y. (1999). Numerical simulation of delamination growth in layered composite plates. European Journal of Mechanics - A/Solids, 18(2), 291–312. https://doi.org/10.1016/S0997-7538(99)80017-5
- Rice, J. R. (1968). A path independent integral and the approximate analysis of strain concentration by notches and cracks. Journal of Applied Mechanics, 35(2), 379–386. https://doi.org/10.1115/1.3601206
- Rice, J. R. (1972). Some remarks on elastic crack-tip stress fields. International Journal of Solids and Structures, 8(6), 751–758. https://doi.org/10.1016/0020-7683(72)90040-6
- Rybicki, E. F., & Kanninen, M. F. (1977). A finite element calculation of stress intensity factors by a modified crack closure integral. Engineering Fracture Mechanics, 9(4), 931–938. https://doi.org/10.1016/0013-7944(77)90013-3
- Sukumar, N., Chopp, D. L., Moës, N., & Belytschko, T. (2000). Extended finite element method for three-dimensional crack modelling. International Journal for Numerical Methods in Engineering, 48(11), 1549–1570. https://doi.org/10.1002/1097-0207(20000820)48:11<;1549::AID-NME955>3.0.CO;2-A
- Tada, H., Paris, P. C., & Irwin, G. R. (2000). The Stress Analysis of Cracks Handbook (3rd ed.). ASME Press. https://doi.org/10.1115/1.801535
- Talreja, R., & Singh, C. V. (2012). Damage and Failure of Composite Materials. Cambridge University Press. https://doi.org/10.1017/CBO9781139016063
- Abdullah, N. A., Curiel-Sosa, J. L., Taylor, Z. A., Tafazzolimoghaddam, B., Martinez Vicente, J. L., & Zhang, C. (2017). Transversal crack and delamination of laminates using XFEM. Composite Structures, 173, 78–88. https://doi.org/10.1016/j.compstruct.2017.04.011
- Westergaard, H. M. (1939). Bearing pressures and cracks: bearing pressures through a slightly waved surface or through a nearly flat part of a cylinder, and related problems of cracks. Journal of Applied Mechanics, 6(2), A49–A53. https://doi.org/10.1115/l.4008919