Have a personal or library account? Click to login

Creating of Transnational Cooperation Network as a Factor of Competitiveness

System Safety: Human - Technical Facility - Environment
Volume 2 (2020): Issue 1 (March 2020)
By:
Open Access
|Apr 2020

References

  1. Boratyńska-Sala, A., Woźniak, M., 2018. Creative techniques in the field of IT project management-use cases, in: Innovation Capability for Socioeconomic Development, ICTM 6/2018, Wrocław, 296-312.
    Search in Google ScholarBack to article
  2. Domagala, M., 2013. Simulation of cavitation in jet pumps, Technical Transactions 110 (5), 51-58.
    Search in Google ScholarBack to article
  3. Domagala, M., Momein, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018. Simulation of Cavitation Erosion in a Hydraulic Valve, Mater. Res. Proc., 5, 1-6.
    Search in Google ScholarBack to article
  4. Domagala, M., Momeni, H., 2017. CFD simulation of cavitation over water turbine hydrofoils, Technical Transactions, 114 (9), 159-164 (2017).
    Search in Google ScholarBack to article
  5. Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018. Simulation of Particle Erosion in a Hydraulic Valve, Mater. Res. Proc., 5, 17-24.
    Search in Google ScholarBack to article
  6. Drljača, M., 2019. Reversible supply chain in function of competitiveness, Production Engineering Archives, 22, 30-35, DOI: 10.30657/pea.2019.22.06
    Search in Google ScholarBack to article
  7. E. Skrzypczak-Pietraszek, 2016. High production of flavonoids and phenolic acids for pharmaceutical purposes in Vitex agnus castus L. shoot culture, New Biotechnol. 33, 155-161.
    Search in Google ScholarBack to article
  8. Fabis-Domagala, Domagala, M., 2017. Matrix FMEA analysis with cause-effect diagram for selected fluid power component, Technical Transactions, 114 (10), 141-146.
    Search in Google ScholarBack to article
  9. Fabis-Domagala, J., 2013. Application of FMEA matrix for prediction of potential failures in hydraulic cylinder, Technical Transactions, 110 (5), 97-104.
    Search in Google ScholarBack to article
  10. Filo, G., 2013. Computer monitoring and control system of a local LNG supply station, Technical Transactions, 110 (5), 105-112.
    Search in Google ScholarBack to article
  11. Filo, G., 2015. Asynchronous buffer read method in development of DAQ application for supporting research of hydraulic systems, Technical Transactions, 112 (7), 77-82.
    Search in Google ScholarBack to article
  12. Gliń, W. 2018. Problems of polish enterprises in the field of innovation, Production Engineering Archives, 21, 44-47, DOI: 10.30657/pea.2018.21.10
    Search in Google ScholarBack to article
  13. Karpisz, D., Kiełbus, A., Brunner, J., 2019. Trends in Rapid Prototyping and Smart Engineering for Central Europe based on the 3DCentral project, QPI, 1, 363-370, DOI: 10.2478/cqpi-2019-0049
    Search in Google ScholarBack to article
  14. Kiełbus, A., Karpisz, D., 2019. Risk management as a process security tool, SYSTEM SAFETY: HUMAN-TECHNICAL FACILITY-ENVIRONMENT, 1, 234-239, DOI: 10.2478/czoto-2019-0030
    Search in Google ScholarBack to article
  15. Kozien, E., Kozien, M.S., 2016. The estimation of diversification scale of production in machinery industry by application of the entropy notion.
    Search in Google ScholarBack to article
  16. Kozien, E., Kozien, M.S., 2017. Interval analysis as a method of measurement of uncertainity in the check-list method applied to identification of stage phase of companies, Proc. 26th Int. Sci. Conf. Economic and Social Development - "Building Resilient Society", Zagreb 08.12-09.12.2017, 210-215.
    Search in Google ScholarBack to article
  17. Osocha, P., 2018. Calculation of residual life for P91 material based on creep rate and time to rupture, Mater. Res. Proc., 5, 177-182.
    Search in Google ScholarBack to article
  18. Pawlowska, G., Klimecka-Tatar, D., Radomska, K., 2017. The effect of bio-tolerated binder content on the corrosive behavior of RE-M-B in magnetic composites in sulphite solutions, Ochr. Przed Koroz., 60, 372-375.
    Search in Google ScholarBack to article
  19. Pietras, P., 2015. Zarządzanie ryzykiem w komercjalizacji działalności B+R - analiza złych praktyk, in: Budowa potencjału uczelni wyższej do współpracy z przedsiębiorstwami, Wydawnictwo Uniwersytetu Łódzkiego, Łódź, 157-173.
    Search in Google ScholarBack to article
  20. Saniuk, S., Saniuk, A. 2018. Challenges of Industry 4.0 for Production Enterprises Functioning Within Cyber Industry Networks, Management Systems in Production Engineering, 26(4), 212–216, DOI: 10.1515/mspe-2018-0034
    Search in Google ScholarBack to article
  21. Stacho, Z., Stachová, K., Papula, J., Papulová, Z., Kohnová, L., 2019. Effective Communication in Organisations Increases their Competitiveness, Polish Journal of Management Studies, 19 (1), 391-403, DOI: 10.17512/pjms.2019.19.1.30
    Search in Google ScholarBack to article
  22. Skrzypczak-Pietraszek, E., Kwiecien, I., Goldyn, A., Pietraszek, J., 2017. HPLC-DAD analysis of arbutin produced from hydroquinone in a biotransformation process in Origanum majorana L. shoot culture, Phytochem. Lett., 20, 443-448.
    Search in Google ScholarBack to article
  23. Skrzypczak-Pietraszek, E., Piska, K., Pietraszek, J., 2018. Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy, Eng. Life Sci., 18, 287-297.
    Search in Google ScholarBack to article
  24. Ulewicz, R., 2016. Quality Management System operation in the woodworking industry. Int. Conf. Path Forward for wood products: a global perspective, Proc. of Sci. Papers, Zagreb, WOODEMA 51-56.
    Search in Google ScholarBack to article
  25. Ulewicz, R., Selejdak, J., Borkowski, S., Jagusiak-Kocik, M., 2013. Process management in the cast iron foundry, Metal 2013 Proc. 22nd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1926-1931.
    Search in Google ScholarBack to article
  26. Ulewicz, R., Szataniak, P., Novy, F., 2014. Fatigue properties of wear resistant martensitic steel, Metal 2014 Proc. 23rd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 784-789.
    Search in Google ScholarBack to article
  27. Wlodarczyk, R., Dudek, A., Nitkiewicz, Z., 2011. Corrosion analysis of sintered material used for low-temperature fuel cell plates, Arch. Metall. Mater., 56, 181-186.
    Search in Google ScholarBack to article
  28. Woźniak, M., Boratyńska-Sala, A., 2018. The relation of IT project management and creativity, in: Innovation Capability for Socioeconomic Development, ICTM 6/2018, Wrocław, 278-295.
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/czoto-2020-0035 | Journal eISSN: 2657-5450
Journal RSS Feed
Language: English
Page range: 285 - 291
Submitted on: Nov 28, 2019
Accepted on: Feb 20, 2020
Published on: Apr 18, 2020
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
3DCentral,
transnational cooperation network,
project management,
rapid prototyping,
smart engineering
Related subjects:
Business and economics,
Business management,
Business management, other,
Engineering,
Mechanical engineering,
Production technology,
Social sciences,
Sociology,
Sociology of science, technology, and environment,
Communication science,
Interpersonal communication

© 2020 Anna Kiełbus, Dariusz Karpisz, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Previous articleVolume 2 (2020): Issue 1 (March 2020)Next article