Creating of Transnational Cooperation Network as a Factor of Competitiveness

Anna Kiełbus; Dariusz Karpisz

doi:10.2478/czoto-2020-0035

.blurhash-client-img { display: none !important; }

Creating of Transnational Cooperation Network as a Factor of Competitiveness

System Safety: Human - Technical Facility - Environment

Volume 2 (2020): Issue 1 (March 2020)

By: Anna Kiełbus and Dariusz Karpisz

Open Access

|Apr 2020

Abstract

The paper presents good practices and selected problems of creating cooperation networks. The basics of creating and disseminating new forms of cooperation between enterprises and universities have been described. Based on the implemented international project “3DCentral - Catalyzing Smart Engineering and Rapid Prototyping”, selected conclusions from creating network and management of many project activities including innovative technologies are presented.

References

Boratyńska-Sala, A., Woźniak, M., 2018. Creative techniques in the field of IT project management-use cases, in: Innovation Capability for Socioeconomic Development, ICTM 6/2018, Wrocław, 296-312.
Search in Google Scholar Back to article
Domagala, M., 2013. Simulation of cavitation in jet pumps, Technical Transactions 110 (5), 51-58.
Search in Google Scholar Back to article
Domagala, M., Momein, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018. Simulation of Cavitation Erosion in a Hydraulic Valve, Mater. Res. Proc., 5, 1-6.
Search in Google Scholar Back to article
Domagala, M., Momeni, H., 2017. CFD simulation of cavitation over water turbine hydrofoils, Technical Transactions, 114 (9), 159-164 (2017).
Search in Google Scholar Back to article
Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018. Simulation of Particle Erosion in a Hydraulic Valve, Mater. Res. Proc., 5, 17-24.
Search in Google Scholar Back to article
Drljača, M., 2019. Reversible supply chain in function of competitiveness, Production Engineering Archives, 22, 30-35, DOI: 10.30657/pea.2019.22.06
Search in Google Scholar Back to article
E. Skrzypczak-Pietraszek, 2016. High production of flavonoids and phenolic acids for pharmaceutical purposes in Vitex agnus castus L. shoot culture, New Biotechnol. 33, 155-161.
Search in Google Scholar Back to article
Fabis-Domagala, Domagala, M., 2017. Matrix FMEA analysis with cause-effect diagram for selected fluid power component, Technical Transactions, 114 (10), 141-146.
Search in Google Scholar Back to article
Fabis-Domagala, J., 2013. Application of FMEA matrix for prediction of potential failures in hydraulic cylinder, Technical Transactions, 110 (5), 97-104.
Search in Google Scholar Back to article
Filo, G., 2013. Computer monitoring and control system of a local LNG supply station, Technical Transactions, 110 (5), 105-112.
Search in Google Scholar Back to article
Filo, G., 2015. Asynchronous buffer read method in development of DAQ application for supporting research of hydraulic systems, Technical Transactions, 112 (7), 77-82.
Search in Google Scholar Back to article
Gliń, W. 2018. Problems of polish enterprises in the field of innovation, Production Engineering Archives, 21, 44-47, DOI: 10.30657/pea.2018.21.10
Search in Google Scholar Back to article
Karpisz, D., Kiełbus, A., Brunner, J., 2019. Trends in Rapid Prototyping and Smart Engineering for Central Europe based on the 3DCentral project, QPI, 1, 363-370, DOI: 10.2478/cqpi-2019-0049
Search in Google Scholar Back to article
Kiełbus, A., Karpisz, D., 2019. Risk management as a process security tool, SYSTEM SAFETY: HUMAN-TECHNICAL FACILITY-ENVIRONMENT, 1, 234-239, DOI: 10.2478/czoto-2019-0030
Search in Google Scholar Back to article
Kozien, E., Kozien, M.S., 2016. The estimation of diversification scale of production in machinery industry by application of the entropy notion.
Search in Google Scholar Back to article
Kozien, E., Kozien, M.S., 2017. Interval analysis as a method of measurement of uncertainity in the check-list method applied to identification of stage phase of companies, Proc. 26^th Int. Sci. Conf. Economic and Social Development - "Building Resilient Society", Zagreb 08.12-09.12.2017, 210-215.
Search in Google Scholar Back to article
Osocha, P., 2018. Calculation of residual life for P91 material based on creep rate and time to rupture, Mater. Res. Proc., 5, 177-182.
Search in Google Scholar Back to article
Pawlowska, G., Klimecka-Tatar, D., Radomska, K., 2017. The effect of bio-tolerated binder content on the corrosive behavior of RE-M-B in magnetic composites in sulphite solutions, Ochr. Przed Koroz., 60, 372-375.
Search in Google Scholar Back to article
Pietras, P., 2015. Zarządzanie ryzykiem w komercjalizacji działalności B+R - analiza złych praktyk, in: Budowa potencjału uczelni wyższej do współpracy z przedsiębiorstwami, Wydawnictwo Uniwersytetu Łódzkiego, Łódź, 157-173.
Search in Google Scholar Back to article
Saniuk, S., Saniuk, A. 2018. Challenges of Industry 4.0 for Production Enterprises Functioning Within Cyber Industry Networks, Management Systems in Production Engineering, 26(4), 212–216, DOI: 10.1515/mspe-2018-0034
Search in Google Scholar Back to article
Stacho, Z., Stachová, K., Papula, J., Papulová, Z., Kohnová, L., 2019. Effective Communication in Organisations Increases their Competitiveness, Polish Journal of Management Studies, 19 (1), 391-403, DOI: 10.17512/pjms.2019.19.1.30
Search in Google Scholar Back to article
Skrzypczak-Pietraszek, E., Kwiecien, I., Goldyn, A., Pietraszek, J., 2017. HPLC-DAD analysis of arbutin produced from hydroquinone in a biotransformation process in Origanum majorana L. shoot culture, Phytochem. Lett., 20, 443-448.
Search in Google Scholar Back to article
Skrzypczak-Pietraszek, E., Piska, K., Pietraszek, J., 2018. Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy, Eng. Life Sci., 18, 287-297.
Search in Google Scholar Back to article
Ulewicz, R., 2016. Quality Management System operation in the woodworking industry. Int. Conf. Path Forward for wood products: a global perspective, Proc. of Sci. Papers, Zagreb, WOODEMA 51-56.
Search in Google Scholar Back to article
Ulewicz, R., Selejdak, J., Borkowski, S., Jagusiak-Kocik, M., 2013. Process management in the cast iron foundry, Metal 2013 Proc. 22^nd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1926-1931.
Search in Google Scholar Back to article
Ulewicz, R., Szataniak, P., Novy, F., 2014. Fatigue properties of wear resistant martensitic steel, Metal 2014 Proc. 23rd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 784-789.
Search in Google Scholar Back to article
Wlodarczyk, R., Dudek, A., Nitkiewicz, Z., 2011. Corrosion analysis of sintered material used for low-temperature fuel cell plates, Arch. Metall. Mater., 56, 181-186.
Search in Google Scholar Back to article
Woźniak, M., Boratyńska-Sala, A., 2018. The relation of IT project management and creativity, in: Innovation Capability for Socioeconomic Development, ICTM 6/2018, Wrocław, 278-295.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/czoto-2020-0035 | Journal eISSN: 2657-5450

Journal RSS Feed

Language: English

Page range: 285 - 291

Submitted on: Nov 28, 2019

Accepted on: Feb 20, 2020

Published on: Apr 18, 2020

Published by: Quality and Production Managers Association

In partnership with: Paradigm Publishing Services

Publication frequency: 1 issue per year

Keywords:

3DCentral,

transnational cooperation network,

project management,

rapid prototyping,

smart engineering

Related subjects:

Business and economics,

Business management,

Business management, other,

Engineering,

Mechanical engineering,

Production technology,

Social sciences,

Sociology,

Sociology of science, technology, and environment,

Communication science,

Interpersonal communication

© 2020 Anna Kiełbus, Dariusz Karpisz, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 2 (2020): Issue 1 (March 2020)