Safety of CMS Experiment Systems Operation – Integration of a New CO2 Fire Extinguishing Weighing System to the CMS Safety Panel
References
- Burkimsh, P., 2016. WinCC-OA & The JCOP Framework. http://jcop.web.cern.ch/platforms/wincc-oa-315 [date: 0811.2018]
- CERN JCOP FW Team, 2010. Joint controls project (JCOP) framework sub-project guidelines and conventions. http://jcop.web.cern.ch/jcop-framework [date: 08.11.2018]
- Dudek, A., 2011. Investigations of microstructure and properties in bioceramic coatings used in medicine. Archives of Metallurgy and Materials, 56, 135-140, DOI: 10.2478/v10172-011-0015-y
- Dudek, A., Włodarczyk, R., Nitkiewicz, Z., 2010. Structural analysis of sintered materials used for low-temperature fuel cell plates. Materials Science Forum 638-642, 536-541, DOI: 10.4028/www.scientific.net/MSF.638-642.536
- Dwornicka, R., 2014. The impact of the power plant unit start-up scheme on the pollution load. Advanced Materials Research, 874, 63-69. DOI: 10.4028/www.scientific.net/AMR.874.63
- Dwornicka, R., Radek, N., Krawczyk, M., Osocha, P., Pobędza, J., 2017. The laser textured surfaces of the silicon carbide analyzed with the bootstrapped tribology model. Metal 2017: 26th Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1252-1257.
- Fabiś-Domagała, J., Filo, G., Momeni, H., Domagała, M., 2018. Instruments of identification of hydraulic components potential failures. MATEC Web Conf., 183, art. 03008, DOI: 10.1051/matecconf/201818303008
- Fraden, J., 2010. Handbook of Modern Sensors. Physics, Designs, and Applications. Springer-Verlag New York.
- Guidoni, G., Dudek, A., Patsias, S., Anglada, M., 2005. Fracture behaviour of thermal barrier coatings after high temperature exposure in air. Materials Science and Engineering: A, 397, 209-214, DOI: https://doi.org/10.1016/j.msea.2005.02.022
- Henley, A.J., Wolf, D., 2018. Learn Data Analysis with Python. Lessons in coding. Apress, USA.
- Klimecka-Tatar, D., 2018. Powder surface modification as a method of corrosion rate limitation of the magnetic RE-M-B composite in an acid medium with different pH. Materials Research Proceedings, 5, 231-236, DOI: 10.21741/9781945291814-41
- Klimecka-Tatar, D., Borkowski, S., Sygut, P., 2015. The kinetics of Ti-1Al-1Mn alloy thermal oxidation and characteristic of oxide layer. Archives of Metallurgy and Materials, 60, 735-738, DOI: 10.1515/amm-2015-0199
- Korzekwa, J., Skoneczny, W., Dercz, G., Bara, M., 2014. Wear mechanism of Al2O3/WS2 with PEEK/BG plastic. Journal of Tribology, 136, art. 011601. DOI: 10.1115/1.4024938
- Lisowski, E., Filo, G., 2017. Analysis of a proportional control valve flow coefficient with the usage of a CFD method. Flow Measurement and Instrumentation, 53, 269-278, DOI: 10.1016/j.flowmeasinst.2016.12.009
- Miller, C., 2018. Hands-On Data Analysis with NumPy and pandas: Implement Python packages from data manipulation to processing. Packt Publishing, Birmingham, UK.
- Opydo, M., Kobyłecki, R., Dudek, A., Bis, Z., 2016. The effect of biomass co-combustion in a CFB boiler on solids accumulation on surfaces of P91 steel tube samples. Biomass & Bioenergy 85, 61-68.
- Pietraszek, J., 2003. Response surface methodology at irregular grids based on Voronoi scheme with neural network approximator. In: Rutkowski L., Kacprzyk J. (eds) Neural Networks and Soft Computing. Advances in Soft Computing, vol. 19. Physica, Heidelberg, 250-255, DOI: 10.1007/978-3-7908-1902-1_35.
- Pietraszek, J., Dwornicka, R., Krawczyk, M., Kołomycki, M., 2017. The non-parametric approach to the quantification of the uncertainty in the design of experiments modelling. UNCECOMP 2017, NTU of Athens, 598-604.
- Pietraszek, J., Gądek-Moszczak, A., Toruński, T., 2014. Modeling of errors counting system for PCB soldered in the wave soldering technology. Advanced Materials Research, 874, 139-143, DOI: 10.4028/www.scientific.net/AMR.874.139
- Pietraszek, J., Kołomycki, M., Szczotok, A., Dwornicka, R., 2016. The fuzzy Approach to assessment of ANOVA results. In: Nguyen NT., Iliadis L., Manolopoulos Y., Trawiński B. (eds) Computational Collective Intelligence. ICCCI 2016. Lecture Notes in Computer Science, vol 9875. Springer, 260–268, DOI: 10.1007/978-3-319-45243-2_24
- Radek, N., Szczotok, A., Gądek-Moszczak, A., Dwornicka, R., Broncek, J., Pietraszek, J., 2018. The impact of laser processing parameters on the properties of electro-spark deposited coatings. Arch. Metall. Mater., 63, 2, 809-816, DOI: 10.24425/122407
- Radziszewska-Wolińska, J.M., Kaźmierczak, A., 2018. Fire properties of upholstery and fire resistance of the complete passenger Seat. Mater. Res. Proc. 5, 31-36.
- Radziszewska-Wolińska, J.M., Milczarek, D., 2018. Fire tests of non-metallic materials for walls and ceilings in rolling stock. Materials Research Proceedings, 5, 90-95, DOI: 10.21741/9781945291814-6
- Radziszewska-Wolińska, J.M., Radek, N., Pasieczyński, L., 2018. Fire properties of “anti-graffiti” coating systems for rolling stock. AUTOMOTIVE SAFETY 2018: 11th Int. Science and Technical Conf. Automotive Safety, IEEE, New York. DOI: 10.1109/AUTOSAFE.2018.8373329
- Scendo, M., Trela, J., Radek, N., 2014. Influence of laser power on the corrosive resistance of WC-Cu coating. Surface and Coatings Technology, 259, C, 401-407, DOI: 10.1016/j.surfcoat.2014.10.062.
- Singh, B. et al., 2016a. Feasibility studies of time-like proton electromagnetic form factors at PANDA at FAIR. The European Physical Journal A, 52, art. 325.
- Singh, B. et al., 2016b. Study of doubly strange systems using stored antiprotons. Nuclear Physics A, 954, 323-340.
- Singh, B. et al., 2017. Feasibility study for the measurement of pi N transition distribution amplitudes at (P)over-barANDA in (P)over-barp -> J/psi pi(0). Physical Review D, 95(3), 25 p., art. 032003.
- Skrzypczak-Pietraszek, E., Pietraszek, J., 2009. Phenolic acids in in vitro cultures of Exacum affine Balf. f. Acta Biologica Cracoviensia. Series Botanica, 51, 62-62.
- Skrzypczak-Pietraszek, E., Piska, K., Pietraszek, J., 2018. Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy. Engineering in Life Sciences, 18, 287-297, DOI: 10.1002/elsc.201800003
- Styrylska, T., Pietraszek, J., 1992. Numerical modeling of non-steady-state temperature-fields with supplementary data. Zeitschrift für angewandte Mathematik und Mechanik, 72, T537-T539.
- Szabracki, P., Lipiński, T., 2014. Influence of sigma phase precipitation on the intergranular corrosion resistance of X2CrNiMoN25-7-4 super duplex stainless steel. Metal 2014: 23rd Int. Conference Metallurgy and Materials. Tanger, Ostrava, 476 481.
- Ulewicz, M., Radzymińska-Lenarcik, E., 2011. Transport of metal ions across polymer inclusion membrane with 1-alkylimidazole. Physicochemical Problems of Mineral Processing, 46, 119-130.
- Ulewicz, R., Selejdak, J., Borkowski, S., Jagusiak-Kocik, M., 2013. Process management in the cast Iron foundry. Metal 2013: 22nd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1926-1931.
DOI: https://doi.org/10.2478/czoto-2019-0063 | Journal eISSN: 2657-5450
Language: English
Page range: 490 - 497
Submitted on: Nov 7, 2018
Accepted on: Dec 19, 2018
Published on: Mar 28, 2019
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2019 Patrycja Górniak, Andrzej Sobczyk, Janusz Pobędza, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.