References
- Baker, R.R.: Combustion and Thermal Decomposition Regions Inside a Burning Cigarette; Combust. Flame 30 (1977) 21–32. DOI: 10.1016/0010-2180(77)90048-7
- Baker, R.R.: Product Formation Mechanisms Inside a Burning Cigarette; Prog. Energy Combust. Sci. 7 (1981) 135–153. DOI: 10.1016/0360-1285(81)90008-3
- Li, B, L. Zhao, L. Wang, C. Liu, K.G. McAdam, and B. Wang: Gas-Phase Pressure and Flow Velocity Fields Inside a Burning Cigarette During a Puff; Thermochim. Acta 623 (2016) 22–28. DOI: 10.1016/j.tca.2015.11.006
- Jiang, H., X. Gao, Y. Gao, and Y. Liu: Current Knowledge and Challenges of Particle Size Measurements of Mainstream E-Cigarette Aerosols and Their Implication on Respiratory Dosimetry; J. Respir. 3 (2023) 7–28. DOI: 10.3390/jor3010003
- Baker, R.R.: Smoke Generation Inside a Burning Cigarette: Modifying Combustion to Develop Cigarettes that may be less Hazardous to Health; Prog. Energy Combust. Sci. 32 (2006) 373–385. DOI: 10.1016/j.pecs.2006.01.001
- Zhang, R., A. Khalizov, L. Wang, M. Hu, and W. Xu: Nucleation and Growth of Nanoparticles in the Atmosphere; Chem. Rev. 112 (2012) 1957–2011. DOI: 10.1021/cr2001756
- Hinds, W.C. and Y. Zhu: Aerosol Technology: Properties, Behavior, and Measurement of Airborne Particles; John Wiley & Sons, 2022. ISBN: 978-1-119-49404-1
- Zhang, Y., Y. Zhang, B. Li, X. Jin, T. Liu, K. Zhang, L. Fu, W. Qi, Q. Zhang, and B. Li: Study on the Key Factors Affecting the Aerosol Release Characteristics of Closed-Ended Heated Tobacco Products: 1. Heating Temperature; J. Anal. Appl. Pyrolysis 182 (2024) 106649. DOI: 10.1016/j.jaap.2024.106649
- Eaton, D., B. Jakaj, M. Forster, J. Nicol, E. Mavropoulou, K. Scott, C. Liu, K. McAdam, J. Murphy, and C.J. Proctor: Assessment of Tobacco Heating Product THP1.0. Part 2: Product Design, Operation and Thermophysical Characterisation; Regul. Toxicol. Pharmacol. 93 (2018) 4–13. DOI: 10.1016/j.yrtph.2017.09.009
- Cullen, J.T., T. Kärkelä, and U. Tapper: Signatures that Differentiate Thermal Degradation and Heterogeneous Combustion of Tobacco Products and Their Respective Emissions; J. Anal. Appl. Pyrolysis 179 (2024) 106478. DOI: 0.1016/j.jaap.2024.106478
- Tane, E.G., A. Amorós-Pérez, L. Martínez-Gómez, M.C. Román-Martínez, and M.A. Lillo-Ródenas: Review and Comparative Analysis of the Particulate Matter Generated in Conventional Cigarettes and Heated Tobacco Products - Mainstream and Environmental Emissions; Environ. Adv. 16 (2024) 100552. DOI: 10.1016/j.envadv.2024.100552
- Smith, M.R., B. Clark, F. Lüdicke, J.-P. Schaller, P. Vanscheeuwijck, J. Hoeng, and M.C. Peitsch: Evaluation of the Tobacco Heating System 2.2. Part 1: Description of the System and the Scientific Assessment Program; Regul. Toxicol. Pharmacol. 81 (2016) S17–S26. DOI: 10.1016/j.yrtph.2016.07.006
- Pratte, P., S. Cosandey, and C. Goujon Ginglinger: Investigation of Solid Particles in the Mainstream Aerosol of the Tobacco Heating System THS2. 2 and Mainstream Smoke of a 3R4F Reference Cigarette; Hum. Exp. Toxicol. 36 (2017) 1115–1120. DOI: 10.1177/0960327116681653
- Tane, E.G., L. Martínez-Gómez, A. Amorós-Pérez, M.C. Román-Martínez, and M.A. Lillo-Rodenas: A Novel Approach to the Quantitative Analysis of the Particulate Matter in Conventional Cigarette Smoke and Heated Tobacco Product Aerosols; Heliyon 10 (2024) e35028. DOI: 10.1016/j.heliyon.2024.e35028
- Zhang, Y., S. Ye, Z. Wen, L. Fu, T. Wang, K. Zhang, C. Liu, S. Wang, X. Tang, D. Kang, B. Wang, and B. Li: Real-Time Characterization and Quantification of Aerosol Components for Open- and Closed-Ended Heated Tobacco Products; Microchem. J. 199 (2024) 110093. DOI: 10.1016/j.microc.2024.110093
- Li, B., Y. Sun, L. Fu, L. Feng, P. Lei, C. Liu, J. Han, S. Shang, S. Wang, and L. Wang: Aerosol Formation and Transfer in Open- and Closed-Ended Heated Tobacco Products; Contrib. Tob. Nicotine Res. 31 (2022) 162–174. DOI: 10.2478/cttr-2022-0017
- Luo, M., S. Li, Y. Zhao, R. Zhu, J. Yang, F. Zhang, Q. Shen, L. Yang, Z. Liu, L. Jiang, and X. Si: Aerosol Release Characteristics of Cigarettes with Different Filter Ventilation Rates During Burning or Heating; Tobacco Sci. Technol. 56 (2023) 53–61. DOI: 10.16135/j.issn1002-0861.2022.0385
- Si, X., F. Zhang, R. Zhu, S. Tang, J. Yang, C. Liu, S. Liu, and H. Cui: Study on the Release and Migration of six Flavourings Under Heating Conditions and Their Effects on the Physical and Chemical Properties of Aerosols; J. Light Ind. 36 (2021) 67–75. DOI: 10.12187/2021.05.
- Wu, J., Z. Chen, F. Huang, A. Hu, Y. Jin, B. Li, L. Wang, and J. Wang: Isothermal Thermogravimetric and Release Characteristics of Key Components from Cut Tobacco of Heated Tobacco Products; J. Light Ind. 38 (2023) 87–93,111. DOI: 10.12187/2023.03.011
- Zhang, K., L. Fu, S. Wang, Q. Zhang, Z. Zhang, P. Lei, J. Wu, and B. Li: Effect of Temperature on Pyrolysis Characteristic of Reconstituted Tobacco for Heated Tobacco Products Under Low-Oxygen Heating Condition; J. Light Ind. 38 (2023) 73–80. DOI: 10.12187/2023.03.009
- Guo, Z., S. Wang, K. Zhang, P. Lei, L. Fu, Q. Zhang, S. Shang, S. Wang, L. Wang, M. Zhang, W. Gong, J. Han, Z. Li, Y. Pan, F. Huang, C. Liu, J. Tang, B. Wang, and B. Li: Thermal De-Oxygenation to form Condensable Aerosol from Reconstituted Tobacco Without Auto-Ignition; Contrib. Tob. Nicotine Res. 31 (2022) 130–141. DOI: 10.2478/cttr-2022-0014
- Wang L., J. Han, M. Zhang, P. Lei, K. Zhang, S. Shang, J. Tang, Z. Li, F. Huang, and B. Li: Retention Rates of Key Aerosol Components by Filters of Electrically Heated Tobacco Products; Tob. Sci. Technol. 53 (2020) 69–75. DOI: 10.16135/j.issn1002-0861.2020.0166
- Zhang, B., W. Du, Z. Wang, S. Song, J. Wang, Z. Sun, and W. Wang: Effects of Filter Ventilation Rate on Releases of Main Aerosol Components from Heated Tobacco Products; Tob. Sci. Technol. 56 (2023) 54–62. DOI: 10.16135/j.issn1002-0861.2023.0135
- Feng, L., L. Fu, L. Wang, L. Shen, L. Zhao, B. Wang, S. Wang, Q. Zhang, K. Zhang, J. Jiang, and B. Li: Design of Array Type Multi-Port Puff-by-Puff Smoking Machine; Tob. Sci. Technol. 56 (2023) 101–107. DOI: 10.16135/j.issn1002-0861.2022.0947
- Ken, S., G. Wen, X. Yang, F. Tian, Y. Yang, F. Li, G. Rao, and Q. Duan: Simultaneous Determination of Moisture, 1, 2-Propylene Glycol, Nicotine and Glycerol in Tobacco Material for Heat-not-Burn Products by GC-TCD; Tob. Sci. Technol. 53 (2020) 41–46. DOI: 10.16135/j.issn1002-0861.2019.0267
- Cui, H., C.U. Yurteri, R. Cabot, F. Xie, and H. Liu: Characterization of Mainstream Cigarette Smoke Aerosol by Size-Fractionated Chemical Analysis of Nicotine, Solanesol, and Tobacco-Specific Nitrosamines; Particul. Sci. Technol. 38 (2020) 587–595. DOI: 10.1080/02726351.2019.1567636
- Feng, L., L. Fu, Y. Zhang, W. Qi, K. Zhang, X, Yin, L. Wang, Z. Zhang, Z. Zhang, L. Zhao, and B. Li: Influences of Airflow Pathway Design Parameters on Puff-by-Puff Releases of Aerosol Components From a Heated Tobacco Product Called Natural Smoke Cigarette; Tob. Sci. Technol. 56 (2023) 44–53. DOI: 10.16135/j.issn1002-0861.2023.0024
- Farsalinos, K.E., N. Yannovits, T. Sarri, V. Voudris, and K. Poulas: Nicotine Delivery to the Aerosol of a Heat-not-Burn Tobacco Product: Comparison with a Tobacco Cigarette and E-Cigarettes; Nicotine Tob. Res. 20 (2018) 1004–1009. DOI: 10.1093/ntr/ntx138
- Stefaniak, A.B., A.C. Ranpara, M.A. Virji, and R.F. LeBouf: Influence of E-Liquid Humectants, Nicotine, and Flavorings on Aerosol Particle Size Distribution and Implications for Modeling Respiratory Deposition; Front. Public Health 10 (2022) 782068. DOI: 10.3389/fpubh.2022.782068
- S.P. Fisenko, A.A. Rostami, D.B. Kane, Y.B. Pithawalla, S.N. Maximoff, W. Li, and M.S. El-Shall: Model of Aerosol Evolution in High Supersaturated Glycerol-Air Vapor Mixtures; Aerosol Sci. Technol. 55 (2021) 871–885. DOI: 10.1080/02786826.2021.1904130