Simulation of Heat and Mass Transfer of Cut Tobacco in a Batch Rotary Dryer by Multi-Objective Optimization

Feng Huang; Nan Deng; Qiaoling Li; Bin Li; Ruilin Hu; Miao Liang; Dengshan Luo; Le Wang

doi:10.2478/cttr-2020-0013

.blurhash-client-img { display: none !important; }

Simulation of Heat and Mass Transfer of Cut Tobacco in a Batch Rotary Dryer by Multi-Objective Optimization

Contributions to Tobacco & Nicotine Research

Volume 29 (2020): Issue 3 (December 2020)

By: Feng Huang, Nan Deng, Qiaoling Li, Bin Li, Ruilin Hu, Miao Liang, Dengshan Luo and Le Wang

Open Access

|Dec 2020

Abstract

To simulate the drying process of cut tobacco in a batch rotary dryer, six different models of equilibrium moisture content were selected to calculate the driving force of mass transfer, and a mathematical model of heat and mass transfer was numerically solved. The multi-objective nonlinear problem of heat and mass transfer coefficients was optimized by employing a weight factor. The simulation results showed that the weight factor r was an important parameter for fitting results of moisture content and temperature. The model evaluation indices almost reached their minimal values with r at 0.1. For all the six equilibrium/classic models the fit was better for moisture content than for temperature. One model (M-Hen/C) was superior to other equilibrium/classic models and the REA (reaction engineering approach) model. This study aims for an understanding of heat and mass transfer in the tobacco drying process, and provides a theoretical framework to support the prediction of temperature and moisture in various drying situations.

References

Stenström, S.: Drying of Biofuels from the Forest – A Review; Dry. Technol. 35 (2017) 1167–1181. DOI: 10.1080/07373937.2016.1258571
Open DOI Search in Google Scholar Back to article
Yang, F., M. Zhang, A.S. Mujumdar, Q. Zhong, and Z. Wang: Enhancing Drying Efficiency and Product Quality Using Advanced Pretreatments and Analytical Tools – An Overview; Dry. Technol. 36 (2018) 1824–1838. DOI: 10.1080/07373937.2018.1431658
Open DOI Search in Google Scholar Back to article
Lin, S.X.Q. and X.D. Chen: The Reaction Engineering Approach to Modelling the Cream and Whey Protein Concentrate Droplet Drying; Chem. Eng. Process. 46 (2007) 437–443. DOI: 10.1016/j.cep.2006.05.021
Open DOI Search in Google Scholar Back to article
Patel, K.C. and X.D. Chen: Sensitivity Analysis of the Reaction Engineering Approach to Modeling Spray Drying of Whey Proteins Concentrate; Dry. Technol. 26 (2008) 1334–1343. DOI: 10.1080/07373930802331019
Open DOI Search in Google Scholar Back to article
Temple, S.J. and A.J.B. van Boxtel: Equilibrium Moisture Content of Tea; J. Agric. Eng. Res. 74 (1999) 83–89. DOI: 10.1006/jaer.1999.0439
Open DOI Search in Google Scholar Back to article
Li, B., W. Zhu, P. Wang, D. Lu, L. Wang, and B. Wang: Fast Drying of Cut Tobacco in Drop Tube Reactor and its Effect on Petroleum Ether Tobacco Extracts; Dry. Technol. 36 (2018) 1304–1312. DOI: 10.1080/07373937.2017.1402022
Open DOI Search in Google Scholar Back to article
Rajan, K.S., K. Dhasandhan, S.N. Srivastava, and B. Pitchumani: Studies on Gas-Solid Heat Transfer During Pneumatic Conveying; Int. J. Heat Mass Transfer 51 (2008) 2801–2813. DOI: 10.1016/j.ijheatmasstransfer.2007.09.042
Open DOI Search in Google Scholar Back to article
Mabrouk, S.B., B. Khiari, and M. Sassi: Modelling of Heat and Mass Transfer in a Tunnel Dryer; Appl. Therm. Eng. 26 (2006) 2110–2118. DOI: 10.1016/j.applthermaleng.2006.04.007
Open DOI Search in Google Scholar Back to article
El-Mesery, H.S. and G. Mwithiga: Performance of a Convective, Infrared and Combined Infrared-Convective Heated Conveyor-Belt Dryer; J. Food Sci. Technol. 52 (2015) 2721–2730. DOI: 10.1007/s13197-014-1347-1
Open DOI Search in Google Scholar Back to article
Silva, D.I.S., G.F.M.V. Souza, and M.A.S. Barrozo: Heat and Mass Transfer of Fruit Residues in a Fixed Bed Dryer: Modeling and Product Quality; Dry. Technol. 37 (2019) 1321–1327. DOI: 10.1080/07373937.2018.1498509
Open DOI Search in Google Scholar Back to article
Białobrzewski, I., M. Zielińska, A.S. Mujumdar, and M. Markowski: Heat and Mass Transfer During Drying of a Bed of Shrinking Particles – Simulation for Carrot Cubes Dried in a Spout-Fluidized-Bed Drier; Int. J. Heat Mass Transfer 51 (2008) 4704–4716. DOI: 10.1016/j.ijheatmasstransfer.2008.02.031
Open DOI Search in Google Scholar Back to article
Silva, P.B., C.R. Duarte, and M.A.S. Barrozo: Dehydration of Acerola (Malpighia emarginata D.C.) Residue in a New Designed Rotary Dryer: Effect of Process Variables on Main Bioactive Compounds; Food Bioprod. Process. 98 (2016) 62–70. DOI: 10.1016/j.fbp.2015.12.008
Open DOI Search in Google Scholar Back to article
Geng, F., Z. Yuan, Y. Yan, D. Luo, H. Wang, B. Li, and D. Xu: Numerical Simulation on Mixing Kinetics of Slender Particles in a Rotary Dryer; Powder Technol. 193 (2009) 50–58. DOI: 10.1016/j.powtec.2009.02.005
Open DOI Search in Google Scholar Back to article
Geng, F., Y. Li, X. Wang, Z. Yuan, Y. Yan, and D. Luo: Simulation of Dynamic Processes on Flexible Filamentous Particles in the Transverse Section of a Rotary Dryer and its Comparison with Ideo-Imaging Experiments; Powder Technol. 207 (2011) 175–182. DOI: 10.1016/j.powtec.2010.10.027
Open DOI Search in Google Scholar Back to article
Geng, F., Y. Li, L. Yuan, M. Liu, X. Wang, Z. Yuan, Y. Yan, and D. Luo: Experimental Study on the Space Time of Flexible Filamentous Particles in a Rotary Dryer; Exp. Therm. Fluid Sci. 44 (2013) 708–715. DOI: 10.1016/j.expthermflusci.2012.09.011
Open DOI Search in Google Scholar Back to article
Jayas, D.S., S. Cenkowski, S. Pabis, and W.E Muir: Review of Thin-Layer Drying and Wetting Equations; Dry. Technol. 9 (1991) 551–588. DOI: 10.1080/07373939108916697
Open DOI Search in Google Scholar Back to article
Doymaz, İ. and O. İsmail: Drying Characteristics of Sweet Cherry; Food Bioprod. Process. 89 (2011) 31–38. DOI: 10.1016/j.fbp.2010.03.006
Open DOI Search in Google Scholar Back to article
Henderson, S. M. and S. Pabis: Grain Drying Theory: 1. Temperature Affection Drying Coefficient; J. Agric. Eng. Res. 6 (1961) 169–170.
Search in Google Scholar Back to article
Menges, H.O. and C. Ertekin: Thin Layer Drying Model for Treated and Untreated Stanley Plums; Energy Convers. Manage. 47 (2006) 2337–2348. DOI: 10.1016/j.enconman.2005.11.016
Open DOI Search in Google Scholar Back to article
Midilli, A., H. Kucuk, and Z. Yapar: A New Model for Single-Layer Drying; Dry. Technol. 20 (2002) 1503–1513. DOI: 10.1081/DRT-120005864
Open DOI Search in Google Scholar Back to article
Hii, C.L., C.L. Law, and M. Cloke: Modeling Using a New Thin Layer Drying Model and Product Quality of Cocoa; J. Food Eng. 90 (2009) 191–198. DOI: 10.1016/j.jfoodeng.2008.06.022
Open DOI Search in Google Scholar Back to article
Xu, Q. and S. Pang: Mathematical Modeling of Rotary Drying of Woody Biomass; Dry. Technol. 26 (2008) 1344–1350. DOI: 10.1080/07373930802331050
Open DOI Search in Google Scholar Back to article
Gu, C., X. Zhang, B. Li, and Z. Yuan: Study on Heat and Mass Transfer of Flexible Filamentous Particles in a Rotary Dryer; Powder Technol. 267 (2014) 234–239. DOI: 10.1016/j.powtec.2014.06.059
Open DOI Search in Google Scholar Back to article
Zhu, W.K., L. Wang, K. Duan, L.Y. Chen, and B. Li: Experimental and Numerical Investigation of the Heat and Mass Transfer for Cut Tobacco During Two-Stage Convective Drying; Dry. Technol. 33 (2015) 907–914. DOI: 10.1080/07373937.2014.997882
Open DOI Search in Google Scholar Back to article
Chen, X.D., W. Pirini, and M. Ozilgen: The Reaction Engineering Approach to Modelling Drying of Thin Layer of Pulped Kiwifruit Flesh under Conditions of Small Biot Numbers; Chem. Eng. Process. 40 (2001) 311–320. DOI: 10.1016/s0255-2701(01)00108-8
Open DOI Search in Google Scholar Back to article
Putranto, A., X.D. Chen, Z. Xiao, and P.A. Webley: Mathematical Modeling of Intermittent and Convective Drying of Rice and Coffee Using the Reaction Engineering Approach (REA); J. Food Eng. 105 (2011) 638–646. DOI: 10.1016/j.jfoodeng.2011.03.036
Open DOI Search in Google Scholar Back to article
Putranto, A., X.D. Chen, and W. Zhou: Modeling of Baking of Thin Layer of Cake Using the Lumped Reaction Engineering Approach (L-REA); J. Food Eng. 105 (2011) 306–311. DOI: 10.1016/j.jfoodeng.2011.02.039
Open DOI Search in Google Scholar Back to article
Li, Q., Y.F. Li, Y. Zhang, Q. Chen, H. Huang, H. Chen, Y. Lin, H. Xiao, Z. Liao, L. Che, W. Xie, and X.D. Chen: Drying Kinetics Study of Irregular Fibril Materials in a “Differential” Laboratory Rotary Dryer: Case Study for Cut Tobacco; Dry. Technol. 36 (2017) 523–536. DOI: 10.1080/07373937.2017.1341920
Open DOI Search in Google Scholar Back to article
Whitman, W.G.: The Two Film Theory of Gas Absorption; Int. J. Heat Mass Transfer 5 (1962) 429–433. DOI: 10.1016/0017-9310(62)90032-7.
Open DOI Search in Google Scholar Back to article
Hills, B.P. and M. Harrison: Two-Film Theory of Flavour Release from Solids; Int. J. Food Sci. Technol. 30 (1995) 425–436. DOI: 10.1111/j.1365-2621.1995.tb01390.x
Open DOI Search in Google Scholar Back to article
Smith, J.M., H.C. Van Ness, and M.M. Abbott: Introduction to Chemical Engineering Thermodynamics; 7^th Edition, McGraw-Hill Education, NY, USA, 2004.
Search in Google Scholar Back to article
Henderson, S.M.: A Basic Concept of Equilibrium Moisture Content; Agric. Eng. 33 (1952) 29–32.
Search in Google Scholar Back to article
Thompson, T.L., R.M. Peart, and G.H. Foster: Mathematical Simulation of Corn Drying - A New Model; Trans. ASAE 24 (1968) 582–586. Available at: https://www.ars.usda.gov/ARSUserFiles/30200525/34MathematicalSimulationofCornDrying.pdf (accessed November 2020)
Search in Google Scholar Back to article
Chen, C.C. and R.V. Morey: Comparison of Four EMC/ERH Equations; Trans. ASAE 32 (1989) 983–990. Available at: https://elibrary.asabe.org (accessed November 2020)
Search in Google Scholar Back to article
Chung, D.S. and H.B. Pfost: Adsorption and Desorption of Water Vapor by Cereal Grains and Their Products. Part II: Development of the General Isotherm Equation; Trans. ASAE 10 (1067) 552–555. Available at: https://elibrary.asabe.org (accessed November 2020)
Search in Google Scholar Back to article
Pfost, H., S.G. Maurer, D. Chung, and G. Milliken: Summarizing and Reporting Equilibrium Moisture Data for Grains; ASAE Paper No. 76–3520, St. Joseph, MI, USA, 1976.
Search in Google Scholar Back to article
Halsey, G.: Physical Adsorption on Non-Uniform Surfaces; J. Chem. Phys 16 (1948) 931–937. DOI: 10.1063/1.1746689
Open DOI Search in Google Scholar Back to article
Yaws, C.L.: Chemical Properties Handbook; McGraw-Hill Education, NY, USA, 1999.
Search in Google Scholar Back to article
Linstrom, P.J. and W.G. Mallard: Nist Chemistry WebBook, Nist Standard Reference Database Number 69, National Institute of Standards and Technology, Gaithersburg, MD, USA, 2005. Available at: https://webbook.nist.gov/chemistry/
Search in Google Scholar Back to article
Zhu, L., X. Qin, Z. Yuan, Y. Yan, D. Luo, and B. Li: Heat and Mass Transfer Characteristics of Filamentous Particles in Transverse Section of Rotary Dryer; Journal of Southeast University, Natural Science Edition, 44 (2014) 756–763. DOI: 10.3969/j.issn.1001-0505.2014.04.014
Open DOI Search in Google Scholar Back to article
Atashkari, K., N. Nariman-Zadeh, A. Pilechi, A. Jamali, and X. Yao: Thermodynamic Pareto Optimization of Turbojet Engines Using Multi-Objective Genetic Algorithms: Int. J. Thermal Sci. 44 (2005) 1061–1071. DOI: 10.1016/j.ijthermalsci.2005.03.016.
Open DOI Search in Google Scholar Back to article
Sarkar, D. and J.M. Modak: Pareto-Optimal Solutions for Multi-Objective Optimization of Fed-Batch Bioreactors Using Nondominated Sorting Genetic Algorithm; Chem. Eng. Sci. 60 (2005) 481–492. DOI: 10.1016/j.ces.2004.07.130.
Open DOI Search in Google Scholar Back to article
Sun, D.W.: Comparison and Selection of EMC/ERH Isotherm Equations for Rice; J. Stored Prod. Res. 35 (1999) 249–264. DOI: 10.1016/s0022-474x(99)00009-0.
Open DOI Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/cttr-2020-0013 | Journal eISSN: 2719-9509

Journal RSS Feed

Language: English

Page range: 145 - 155

Submitted on: Apr 9, 2020

Accepted on: Nov 9, 2020

Published on: Dec 31, 2020

Published by: Institut für Tabakforschung GmbH

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

Cut tobacco,

drying,

heat and mass transfer,

equilibrium moisture content,

multi-objective optimization

Related subjects:

General interest,

Life sciences,

Life sciences, other,

Physics,

Physics, other

© 2020 Feng Huang, Nan Deng, Qiaoling Li, Bin Li, Ruilin Hu, Miao Liang, Dengshan Luo, Le Wang, published by Institut für Tabakforschung GmbH
This work is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 License.

Volume 29 (2020): Issue 3 (December 2020)