Shear Behavior of Deep Beams Reinforced with Single- and Dual-Geometry Steel Fibers
References
- A01 Committee. (2022). Specification for Steel Fibers for Fiber-Reinforced Concrete. ASTM International.
https://doi.org/10.1520/A0820_A0820M-22 - Abbass, A., Abid, S., & Özakça, M. (2019). Experimental Investigation on the Effect of Steel Fibers on the Flexural Behavior and Ductility of High-Strength Concrete Hollow Beams. Advances in Civil Engineering, 2019(1), 8390345.
https://doi.org/10.1155/2019/8390345 - Abdallah, S., & Rees, D. W. A. (2019). Comparisons Between Pull-Out Behaviour of Various Hooked-End Fibres in Normal–High Strength Concretes. International Journal of Concrete Structures and Materials, 13(1), 27.
https://doi.org/10.1186/s40069-019-0337-0 - ACI Committee 318. (2025). ACI CODE-318-25: Building Code for Structural Concrete—Code Requirements and Commentary (ACI CODE-318-25) [Technical Documents].
https://www.concrete.org/store/productdetail.aspx?ItemID=318U25&Language=English&Units=US_Units - ACI PRC-440.2. (2023). Design and Construction of Externally Bonded Fiber-Reinforced Polymer (FRP) Systems for Strengthening Concrete Structures Guide, American Concrete Institute, Farmington Hills, Michigan. ACI PRC-440.2.
- Adhikary, B. B., & Mutsuyoshi, H. (2006). Prediction of shear strength of steel fiber RC beams using neural networks. Construction and Building Materials, 20(9), 801–811.
https://doi.org/10.1016/j.conbuildmat.2005.01.047 - Alizadeh, A., Moradi Shaghaghi, T., Pourbaba, M., Mirrezaei, S. S., & Zandi, Y. (2023). Experimental investigation of shear behavior in high-strength concrete beams reinforced with hooked-end steel fibers and high-strength steel rebars. Buildings, 13(8), 2106.
- Al-Rawe, H. S., Ahmed, S. Y., & Abdullah, S. M. (2024). Retrofitting of reinforced concrete columns under eccentric loads using enhanced ferrocement. Asian Journal of Civil Engineering, 25(8), 5727–5739.
https://doi.org/10.1007/s42107-024-01141-6 - Al-Rawe, H. S., Al-Gburi, M., & Almssad, A. (2026). Ferrocement laminates for strengthening the flexural behavior of reinforced concrete beams. Journal of Asian Architecture and Building Engineering, 1–13.
https://doi.org/10.1080/13467581.2026.2690692 - Al-Ta’an, S. A., & Al-Feel, J. R. (1990). Evaluation of shear strength of fibre-reinforced concrete beams. Cement and Concrete Composites, 12(2), 87–94.
https://doi.org/10.1016/0958-9465(90)90045-Y - Amin, A., & Bentz, E. C. (2018). Strength of steel fiber reinforced concrete beams in pure torsion. Structural Concrete, 19(3), 684–694.
https://doi.org/10.1002/suco.201700183 - ASTM International. (2009). Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement.
- ASTM International. (2013). Standard Specification for Concrete Aggregates [ASTM C33].
- ASTM International. (2015a). Standard Specification for Chemical Admixtures for Concrete [ASTM C494].
- ASTM International. (2015b). Standard Specification for Portland Cement [ASTM C150].
- Bentur, A., & Mindess, S. (2019). Fibre Reinforced Cementitious Composites. CRC Press.
https://books.google.iq/books?id=F3JZygEACAAJ - Chalioris, C. E., & Sfiri, E. F. (2011). Shear Performance of Steel Fibrous Concrete Beams. Procedia Engineering, 14, 2064–2068.
https://doi.org/10.1016/j.proeng.2011.07.259 - Duhaim, H. M., & Mashrei, M. A. (2024). The effect of using steel fibers reinforced concrete layer in compression zone on the flexural behavior of over-reinforced concrete beams. Structural Concrete, 25(1), 456–472.
https://doi.org/10.1002/suco.202200675 - European Committee for Standardization. (2019). BS EN 12390-2:2019: Testing Hardened Concrete—Making and Curing Specimens for Strength Tests [BS EN 12390-2:2019].
- Haider, S., Khan, Q. uz Z., Akhtar, A., & Ilyas, S. (2024). Investigation for optimal hybrid concrete blended with polypropylene and steel fiber to evaluate structural performance. MATEC Web of Conferences, 398, 01024.
- Hilles, M. M., & Ziara, M. M. (2019). Mechanical behavior of high strength concrete reinforced with glass fiber. Engineering Science and Technology, an International Journal, 22(3), 920–928.
https://doi.org/10.1016/j.jestch.2019.01.003 - Kachouh, N., El-Maaddawy, T., El-Hassan, H., & El-Ariss, B. (2021). Shear Behavior of Steel-Fiber-Reinforced Recycled Aggregate Concrete Deep Beams. Buildings, 11(9), 423.
https://doi.org/10.3390/buildings11090423 - Khalaf, N. H., Mahdi, S. M., & Ibrahim, Y. K. (2024). INFLUENCE OF STEEL FIBRES OF CRIMPED AND HOOKED-END SHAPE ON THE MECHANICAL PROPERTIES OF PORTLAND CEMENT | Journal of Engineering and Sustainable Development.
https://jeasd.uomustansiriyah.edu.iq/index.php/jeasd/article/view/1854 - Kyoung-Kyu Choi, Hong-Gun Park, and James K. Wight. (2007). Shear Strength of Steel Fiber-Reinforced Concrete Beams without Web Reinforcement. ACI Structural Journal, 104(1).
https://doi.org/10.14359/18428 - Le, L. A., Nguyen, G. D., Bui, H. H., Sheikh, A. H., & Kotousov, A. (2019). Incorporation of micro-cracking and fibre bridging mechanisms in constitutive modelling of fibre reinforced concrete. Journal of the Mechanics and Physics of Solids, 133, 103732.
https://doi.org/10.1016/j.jmps.2019.103732 - Li, V. C., Stang, H., & Krenchel, H. (1993). Micromechanics of crack bridging in fibre-reinforced concrete. Materials and Structures, 26(8), 486–494.
https://doi.org/10.1007/BF02472808 - Manos, G. C., Katakalos, K., & Papakonstantinou, C. G. (2011). Shear behavior of rectangular beams strengthened with either carbon or steel fiber reinforced polymers. Applied Mechanics and Materials, 82, 571–576.
- Mashrei, M. (2018). Effects of steel fibres and silica fume on the behaviours of square ferrocement slabs under flexural loading. IOP Conference Series: Materials Science and Engineering, 433, 012025.
https://doi.org/10.1088/1757-899X/433/1/012025 - McMahon, J. A., & Birely, A. C. (2018). Service performance of steel fiber reinforced concrete (SFRC) slabs. Engineering Structures, 168, 58–68.
https://doi.org/10.1016/j.engstruct.2018.04.067 - Meda, A., Minelli, F., Plizzari, G. A., & Riva, P. (2005). Shear behaviour of steel fibre reinforced concrete beams. Materials and Structures, 38(3), 343–351.
https://doi.org/10.1007/BF02479300 - Mohammad Reza Zarrinpour & Shih-Ho Chao. (2017). Shear Strength Enhancement Mechanisms of Steel Fiber-Reinforced Concrete Slender Beams. ACI Structural Journal, 114(3).
https://doi.org/10.14359/51689449 - Mostofinejad, D., & Tabatabaei Kashani, A. (2013). Experimental study on effect of EBR and EBROG methods on debonding of FRP sheets used for shear strengthening of RC beams. Composites Part B: Engineering, 45(1), 1704–1713.
https://doi.org/10.1016/j.compositesb.2012.09.081 - Ouda, M. A., & Mashrei, M. A. (2022). Shear strength of steel fibrous concrete beams strengthened by CFRP using various techniques. Structures, 38, 519–535.
https://doi.org/10.1016/j.istruc.2022.02.027 - Qi, J., Wu, Z., Ma, Z. J., & Wang, J. (2018). Pullout behavior of straight and hooked-end steel fibers in UHPC matrix with various embedded angles. Construction and Building Materials, 191, 764–774.
https://doi.org/10.1016/j.conbuildmat.2018.10.067 - Sahoo, D. R., Bhagat, S., & Reddy, T. C. V. (2016). Experimental study on shear-span to effective-depth ratio of steel fiber reinforced concrete T-beams. Materials and Structures, 49(9), 3815–3830.
https://doi.org/10.1617/s11527-015-0756-6 - Shahnewaz, M., & Alam, M. S. (2014). Improved Shear Equations for Steel Fiber-Reinforced Concrete Deep and Slender Beams. ACI Structural Journal, 111(4).
https://doi.org/10.14359/51686736 - Wang, Z., Li, H., Zhang, X., Chang, Y., Wang, Y., Wu, L., & Fan, H. (2023). The Effects of Steel Fiber Types and Volume Fraction on the Physical and Mechanical Properties of Concrete. Coatings, 13(6), 978.
https://doi.org/10.3390/coatings13060978 - Yoon-Keun Kwak, Marc O. Eberhard, Woo-Suk Kim, & Jubum Kim. (2002). Shear Strength of Steel Fiber-Reinforced Concrete Beams without Stirrups. ACI Structural Journal, 99(4).
https://doi.org/10.14359/12122 - Zhi, Q., Xu, Z., Chen, W., Zhang, H., Liu, S., & Yuan, Z. (2025). Shear–Flexural Performance of Steel Fiber-Reinforced Concrete Composite Beams: Experimental Investigation and Modeling. Materials, 18(18), 4322.
https://doi.org/10.3390/ma18184322 - Zīle, E., & Zīle, O. (2013). Effect of the fiber geometry on the pullout response of mechanically deformed steel fibers. Cement and Concrete Research, 44, 18–24.
https://doi.org/10.1016/j.cemconres.2012.10.014
DOI: https://doi.org/10.2478/cee-2027-0027 | Journal eISSN: 2199-6512 (formerly 1336-5835) | Journal ISSN: 1336-5835
Language: English
Submitted on: Aug 29, 2026
Accepted on: Sep 19, 2026
Published on: Oct 17, 2026
Published by: University of Žilina
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2026 Alaa M. Mahdi, Mohammed A. Mashrei, Ali A. Sultan, published by University of Žilina
This work is licensed under the Creative Commons Attribution 4.0 License.