Bending Performance of Half-Slab Styrofoam Mortar with Glazed Nylon Fiber

Solikin, Mochamad; Falah, Muhammad Fajrul; Sunarjono, Sri; Hidayati, Nurul; Trinugroho, Suhendro; Sutanto, Muslich Hartadi; Asnan, Muhammad Noor

doi:10.2478/cee-2021-0006

Abstract

This paper scrutinizes bending performance of light weight half-slab mortar against bending and punching load. To produce the slab, 30 % round bud Styrofoam was used as fine aggregate substitution. Besides, glazed nylon fiber was applied to increase its tension strength and cavities at tension area of slab were also created. This method results in the significant reduction of self-weight of half-slab, while the cavities do not affect its bending performance and the fiber increases its ductility. Furthermore, the lower result of punching test should not to be a disadvantage as the slab is primarily to be used as a formwork.

References

[1] ADMIN.: Precast Concrete in Building (A Guide to Design and Construction). Camberley, UK: The Concrete Centre, 2007.
Search in Google Scholar Back to article
[2] NUNALLY, S. W.: Construction Method and Management. 7th edition, New Jersey, USA: Pearson Education, 2007.
Search in Google Scholar Back to article
[3] CHO, K. - SHIN, Y. - KIM, T.: Effects of Half-Precast Concrete Slab System on Construction Productivity. Sustainability, Vol. 9, No. 7, 2017, pp. 1-15. doi: 10.3390/su9071268.10.3390/su9071268
Search in Google Scholar Back to article
[4] LEE, Y. L. – KARIM, A. T. A. – ISMAIL, A. R. – CHAI, T. J. – KOH, H. B. - NAGAPAN, S. – YEOH, D.: Deflection Of Reinforced Concrete Half-Slab. Int. J. Constr. Technol. Manag., Vol. 1, Jun., 2013, pp. 2289–4454.
Search in Google Scholar Back to article
[5] ACI 213R-03.: Guide for Structural Lightweight-Aggregate Concrete. American Concrete Institute, Farmington Hills, MI, USA, 2003.
Search in Google Scholar Back to article
[6] GILANI, H. G. - SAMPER, K. G. - HAGHI, R. K.: Advanced Process Control and Simulation for Chemical Engineers. Florida, U.S.A.: Apple Academic Press, 2013.
Search in Google Scholar Back to article
[7] ALQAHTANI, F. K. - GHATAORA, G. - KHAN, M. I. - DIRAR, S.: Novel lightweight concrete containing manufactured plastic aggregate. Constr. Build. Mater. Vol. 148, Sep. 2017, pp. 386–397. doi: 10.1016/j.conbuildmat.2017.05.011.10.1016/j.conbuildmat.2017.05.011
Search in Google Scholar Back to article
[8] ADMIN.: The Rundown on Plastic #6 (Styrofoam). American Disposal Services. https://americandisposal.com/blog/the-rundown-on-plastic-6-styrofoam/ (accessed Dec. 12, 2019).
Search in Google Scholar Back to article
[9] SOLIKIN, M. - WIDIYANTO, R. - ASRONI, A. - SETIAWAN, B. - ASNAN, M. N.: High content Styrofoam as partial substitution for fine aggregate in SCC lightweight concrete brick. AIP Conference Proceedings, June 2019, pp. 030022-1 - 030022-6. doi: 10.1063/1.5112426.10.1063/1.5112426
Search in Google Scholar Back to article
[10] NAIK, T. R. - KUMAR, R.: Self-Compacting Concrete (SCC) or Selfleveling Concrete (SLC). Madison, USA: Department of Civil Engineering and Mechanics College of Engineering and Applied Science The University Of Wisconsin - Milwaukee, 2001.
Search in Google Scholar Back to article
[11] DE SCHUTTER, G. – GIBBS, J - DOMONOE, P.: Self-compacting Concrete. Whittles Publishing, Scotland, UK. 2008.
Search in Google Scholar Back to article
[12] MARCALIKOVA, Z. - CAJKA, R.: Determination of Mechanical Properties of Fiber Reinforced Concrete for Numerical Modelling. Civ. Environ. Eng., Vol. 16, No. 1, 2020, pp. 86–106. doi: https://doi.org/10.2478/cee-2020-0010.10.2478/cee-2020-0010
Search in Google Scholar Back to article
[13] YOO, D. Y. - YOON, Y. S.: A Review on Structural Behavior, Design, and Application of Ultra-High-Performance Fiber-Reinforced Concrete. Int. J. Concr. Struct. Mater., Vol. 10, No. 2, 2016, pp. 125–142. doi: 10.1007/s40069-016-0143-x.10.1007/s40069-016-0143-x
Search in Google Scholar Back to article
[14] LEE, S.: Effect of Nylon Fiber Addition on the Performance of Recycled Aggregate Concrete. Applied Sciences, Vol. 9, No. 4. 2019, pp. 1-14. doi: 10.3390/app9040767.10.3390/app9040767
Search in Google Scholar Back to article
[15] YOO, D. Y. - BANTHIA, N.: Impact resistance of fiber-reinforced concrete – A review. Cem. Concr. Compos., Vol. 104, 2019, pp. 1 - 22 doi: https://doi.org/10.1016/j.cemconcomp.2019.103389.10.1016/j.cemconcomp.2019.103389
Search in Google Scholar Back to article
[16] SKH-1.7.23.: Spesifikasi Khusus - Interim Skh-1.7.23 Beton Memadat Sendiri (in English: Special specification for Self Compacting Concrete). Jakarta: Kementerian Pekerjaan Umum Dan Perumahan Rakyat Republik Indonesia Direktorat Jenderal Bina Marga, 2017.
Search in Google Scholar Back to article
[17] EZELDIN, A. S. - PERUMALSAMY, B. N.: Normal- and High-Strength Fiber-Reinforced Concrete under Compression, J. Mater. Civ. Eng., Vol. 4, No. 4, Nov. 1992, pp. 415–429. doi: 10.1061/(ASCE)0899-1561(1992)4:4(415).10.1061/(ASCE)0899-1561(1992)4:4(415)
Search in Google Scholar Back to article
[18] FANTILLI, A. P. - VALLINI, P. - FERRETTI, D. - IORI, I.: Behaviour of R/C Elements in Bending and Tension: The Problem of Minimum Reinforcement Ratio, in Minimum Reinforcement in Concrete Members. A. B. T.-E. S. I. S. Carpinteri, Ed. Elsevier, Vol. 24, 1999, pp. 99–125.10.1016/S1566-1369(99)80063-6
Search in Google Scholar Back to article
[19] TAYLOR, M. - LYDON, F. D. - BARR, B. I. G.: Toughness measurements on steel fibre-reinforced high strength concrete. Cem. Concr. Compos., Vol. 19, No. 4, 1997, pp. 329–340.10.1016/S0958-9465(97)00036-X
Search in Google Scholar Back to article
[20] J. D. R. Joseph, J. Prabakar, and P. Alagusundaramoorth: Flexural Behavior of Precast Concrete Sandwich Panels Under Different Loading Conditions such as Punching and Bending. Alexandria Eng. J., vol. Vol. 57, pp. 309–320, 2018. http://dx.doi.org/10.1016/j.aej.2016.11.016.10.1016/j.aej.2016.11.016
Search in Google Scholar Back to article
[21] ACI 318R-14.: Building code requirements for structural concrete : ACI Committee 318, 2014.
Search in Google Scholar Back to article
[22] BIRKLE, G. - DILGER, W.: Influence of slab thickness on punching shear strength. ACI Struct. J., Vol. 105, 2008, pp. 180–188.10.14359/19733
Search in Google Scholar Back to article
[23] URBAN, T. - GOŁDYN, M. - KRAKOWSKI, J. - KRAWCZYK, Ł.: Experimental Investigation on Punching Behavior of Thick Reinforced Concrete Slabs. Arch. Civ. Eng., Vol. 59, No. 2, 2013, pp. 157–174. doi: https://doi.org/10.2478/ace-2013-0008.10.2478/ace-2013-0008
Search in Google Scholar Back to article
[24] SNI 03-2847-2013, Persyaratan Beton Struktural untuk gedung. (in English: Structural Concrete Requirement for Building) Jakarta: Badan Standarisasi Nasional (BSN), 2013.
Search in Google Scholar Back to article
[25] JOMAA’H, M. - KHAZAAL, A. - AHMED, S.: Effect of replacing the main reinforcement by steel fibers on flexural behavior of one-way concrete slabs. MATEC Web Conf., Vol. 162, Jan. 2018, pp. 1-9. doi: 10.1051/matecconf/201816204010.10.1051/matecconf/201816204010
Search in Google Scholar Back to article

Bending Performance of Half-Slab Styrofoam Mortar with Glazed Nylon Fiber

Abstract

Paradigm

My account