References
- Robotics IIF of. International Federation of Robotics [Internet]. IFR International Federation of Robotics. Available from: https://ifr.org/wr-industrial-robots
- Verl A, Valente A, Melkote S, Brecher C, Ozturk E, Tunc LT. Robots in machining. CIRP Annals [Internet]. 2019 Jan 1;68(2):799-822. Available from: https://doi.org/10.1016/j.cirp.2019.05.009
- Burghardt A, Szybicki D, Kurc K, Muszyńska M. Optimization of process parameters of edge robotic deburring with force control. International Journal of Applied Mechanics and Engineering. 2016 Dec 1;21(4):987-95. Available from: https://doi.org/10.1515/IJAME-2016-0060
- Burghardt A, Szybicki D, Kurc K, Muszyńska M, Mucha J. Experimental Study of Inconel 718 Surface Treatment by Edge Robotic Deburring with Force Control. Strength of Materials [Internet]. 2017 Jul 1;49(4):594-604. Available from: https://doi.org/10.1007/S11223-017-9903-3
- Kurc K, Burghardt A, Szybicki D, Gierlak P, Labuński W, Muszyńska M, et al. Robotic machining in correlation with a 3D scanner. Mechanics and Mechanical Engineering [Internet]. 2020 Sep 1;24(1):36-41. Available from: https://doi.org/10.2478/mme-2020-0003
- Szybicki D. Zastosowanie idei cyfrowych bliźniaków w projektowaniu oraz programowaniu stacji zrobotyzowanych. Rzeszów: Oficyna Wydawnicza Politechniki Rzeszowskiej. 2023;143–152.
- Choi SH, Park KB, Roh DH, Lee JY, Mohammed M, Ghasemi Y, et al. An integrated mixed reality system for safety-aware human-robot collaboration using deep learning and digital twin generation. Robotics and Computer-Integrated Manufacturing. 2022 Feb 1;73:102258. Available from:https://doi.org/10.1016/J.RCIM.2021.102258
- Gregor R, Babinec A, Duchoň F, Dobiš M. Hand Guiding a Virtual Robot Using a Force Sensor. Acta Mechanica et Automatica [Internet]. 2021 Sep 27;15(3):177-86. Available from: https://doi.org/10.2478/ama-2021-0023
- Ugarte M, Etxeberria L, Unamuno G, Bellanco JL, Ugalde E. Implementation of Digital Twin-based Virtual Commissioning in Machine Tool Manufacturing. Procedia Computer Science [Internet]. 2022 Jan 1;200:527-36. Available from: https://doi.org/10.1016/j.procs.2022.01.250
- Striffler N, Voigt T. Concepts and trends of virtual commissioning – A comprehensive review. Journal of Manufacturing Systems [Internet]. 2023 Dec 1;71:664-80. Available from: https://doi.org/10.1016/j.jmsy.2023.10.013
- Mohammad M, Babriya V, Sobh T. Modeling A Deburring Process, Using DELMIA V5®. In: Iskander M, Kapila V, Karim MA, editors. Technological Developments in Education and Automation. Dordrecht: Springer Netherlands. 2010; 549–58. https://doi.org/10.1007/978-90-481-3656-8_100
- Garbev A, Atanassov A. Comparative Analysis of RoboDK and Robot Operating System for Solving Diagnostics Tasks in Off-Line Programming. In: 2020 International Conference Automatics and Informatics (ICAI) [Internet]. 2020; 1-5. Available from: https://doi.org/10.1109/ICAI50593.2020.9311332
- Leali F, Pellicciari M, Pini F, Berselli G, Vergnano A. An Offline Programming Method for the Robotic Deburring of Aerospace Components. In: Neto P, Moreira AP, editors. Robotics in Smart Manufacturing. Berlin, Heidelberg: Springer. 2013; 1-13. https://doi.org/10.1007/978-3-642-39223-8_1
- Reinl C, Friedmann M, Bauer J, Pischan M, Abele E, von Stryk O. Model-based off-line compensation of path deviation for industrial robots in milling applications. In: 2011 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) [Internet]. 2011; 367-72. Available from: https://doi.org/10.1109/AIM.2011.6027113
- Gierlak P. Position/Force Control of Manipulator in Contact with Flexible Environment. Acta Mechanica et Automatica [Internet]. 2019 Mar 1;13(1):16-22. Available from:https://doi.org/10.2478/ama-2019-0003
- Gierlak P. Adaptive Position/Force Control of a Robotic Manipulator in Contact with a Flexible and Uncertain Environment. Robotics [Internet]. 2021 Feb 12;10(1):32. Available from: https://doi.org/10.3390/robotics10010032
- Prajadhiana KP, Manurung YHP, Fateri M, Choo HL, Rahaman WEWA, Adenan MS, et al. Distortion analysis of WAAM component using thermo-mechanical, inherent strain and experimental methods. Prog Addit Manuf [Internet]; 2025 Apr 25. Available from: https://doi.org/10.1007/s40964-025-01102-8
- Manurung YHP, Prajadhiana KP, Adenan MS, Awiszus B, Graf M, Haelsig A. Analysis of material property models on WAAM distortion using nonlinear numerical computation and experimental verification with P-GMAW. ArchivCivMechEng [Internet]. 2021 Feb 16;21(1):32. Available from: https://doi.org/10.1007/s43452-021-00189-4
- Prajadhiana KP, Manurung YHP, Bauer A, Adenan MS, Syahriah NI, Mohamed MA et al. Experimental verification of computational and sensitivity analysis on substrate deformation and plastic strain induced by hollow thin-walled WAAM structure. Rapid Prototyping Journal [Internet]. 2021 Oct 11;28(3):559-72. Available from: https://doi.org/10.1108/RPJ-06-2020-0135
- Prajadhiana KP, Taufek T, Wan Abdul Rahaman WE, Manurung YHP, Adenan MS, Mat MF, et al. Distortion Analysis Method for Wire Arc Additive Manufacturing Component Using Thermomechanical Computation with Enhanced Separation and Deposition Algorithm. 3D Printing and Additive Manufacturing [Internet]. 2024 Aug;11(4):e1616–28. Available from: https://doi.org/10.1089/3dp.2023.0033
- Ahmad SN, Manurung YH, Adenan MS, Yusof F, Mat MF, Prajadhiana KP, et al. Experimental validation of numerical simulation on deformation behaviour induced by wire arc additive manufacturing with feedstock SS316L on substrate S235. Int J Adv Manuf Technol [Internet]. 2022 Mar 1;119(3):1951-64. Available from: https://doi.org/10.1007/s00170-021-08340-4
- Ahmad SN, Manurung YHP, Prajadhiana KP, Busari YO, Mat MF, Muhammad N, et al. Numerical modelling and experimental analysis on angular strain induced by bead-on-plate SS316L GMAW using inherent strain and thermomechanical methods. Int J Adv Manuf Technol [Internet]. 2022 May 1;120(1):627-44. Available from: https://doi.org/10.1007/s00170-022-08684-5
- Zhang D, Wang L, Bi Z. Kinematic, Dynamic Modeling and Remote Control of a Robotic Machine. In: 2007 IEEE International Conference on Control and Automation [Internet]. 2007; 2441-6. Available from: https://doi.org/10.1109/ICCA.2007.4376801
- Ye SH, Wang Y, Ren YJ, Li DK. Robot Calibration Using Iteration and Differential Kinematics. J Phys: Conf Ser [Internet]. 2006 Oct;48(1):1. Available from: https://doi.org/10.1088/1742-6596/48/1/001
- Motta JMST, de Carvalho GC, McMaster RS. Robot calibration using a 3D vision-based measurement system with a single camera. Robotics and Computer-Integrated Manufacturing [Internet]. 2001 Dec 1;17(6):487-97. Available from: https://doi.org/10.1016/S0736-5845(01)00024-2
- Zheng Q, Jia J, Zhu P, Xiao Y, Ma W, Zhao S. Kinematics analysis and trajectory planning of ABB-IRB2400 robot. UPB Sci Bull. 84.
- Garcia JG, Robertsson A, Ortega JG, Johansson R. Automatic Calibration Procedure for a Robotic Manipulator Force Observer. In: Proceedings of the 2005 IEEE International Conference on Robotics and Automation [Internet]. 2005; 2703-8. Available from: https://doi.org/10.1109/ROBOT.2005.1570522
- Product specification - IRB 2400 [Internet]. Available from: https://library.e.abb.com/pub-lic/c648b6ab496748c1b22499a0ac451da6/3HAC042195%20PS%20IRB%202400%20on%20IRC5-en.pdf?x-sign=9s04sLzDVfI1FMiR7YKzqISKK8NL1YaWeKP8nDcheXVfeqWd c57xpg0NeUSNlqAE
- Application manual Force Control RobotWare 6.13. ABB ROBOTICS; 2021.
- Spong MW, Hutchinson S, Vidyasagar M. Robot Modeling and Control. 2nd ed. John Wiley & Sons Ltd; 2020.
- Takeuchi A, Kato D, Sekioka M, Hirogaki T, Aoyama E. Study on Singularity Passing Method for Large Industrial Robot Based on Proper Element Improvement of Inverse MatrixStudy on Singularity Passing Method for Large Industrial Robot Based on Proper Element Improvement of Inverse Matrix. IJMERR [Internet]. 2024;13(2):278-83. Available from: https://doi.org/10.18178/ijmerr.13.2.278-283
- Kozłowski K, Dutkiewicz P, Wróblewski W. Modelowanie i sterowanie robotów. Wydawnictwo Naukowe PWN; 2003.
- Craig JJ. Introduction to robotics : mechanics and control. 4th ed. Pearson; 2021.
- Olsson H, Åström KJ, Canudas De Wit C, Gäfvert M, Lischinsky P. Friction Models and Friction Compensation. European Journal of Control. 1998 Jan 1;4(3):176-95. Available from:https://doi.org/10.1016/S0947-3580(98)70113-X
- Appendix to Comprehensive Model of the Abb Irb 2400 for Simulation and Control Applications [Internet]. GitHub. Available from: https://github.com/pobal/A-COMPREHENSIVE-MODEL-OF-THE-ABB-IRB-2400-FOR-SIMULATION-AND-CONTROL-APPLICATIONS.git
- Wu J, Wang J, You Z. An overview of dynamic parameter identification of robots. Robotics and Computer-Integrated Manufacturing [Internet]. 2010 Oct 1;26(5):414-9. Available from: https://doi.org/10.1016/j.rcim.2010.03.013
- del Sol E, Pagala P, King R, Ferre M. External force estimation for telerobotics without force sensor. Advances in Intelligent Systems and Computing [Internet]. 2014;253:631-44. Available from: https://doi.org/10.1007/978-3-319-03653-3_45/COVER
- Indri M, Lazzero I, Antoniazza A, Bottero AM. Friction modeling and identification for industrial manipulators. In: 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation (ETFA) [Internet]. Cagliari Italy. IEEE. 2013;1-8. Available from: https://doi.org/10.1109/ETFA.2013.6647958
- Obal P, Gierlak P. EGM Toolbox-Interface for Controlling ABB Robots in Simulink. Sensors 2021; 21(22):7463. Available from: https://doi.org/10.3390/S21227463
- Obal P, Burghardt A, Kurc K, Szybicki D, Gierlak P. Monitoring the Parameters of Industrial Robots. In: Hanus R, Mazur D, Kreischer C, editors. Methods and Techniques of Signal Processing in Physical Measurements [Internet]. Cham: Springer International Publishing; 2019;230–8. Lecture Notes in Electrical Engineering; 548. Available from: https://doi.org/10.1007/978-3-030-11187-8_19
- Bittencourt AC, Gunnarsson S. Static friction in a robot joint-modeling and identification of load and temperature effects. Journal of Dynamic Systems. Measurement and Control. Transactions of the ASME [Internet]. 2012 Sep 1;134(5). Available from: https://doi.org/10.1115/1.4006589/395008