Effect of Fe-Ni Substitution in FeNiSiB Soft Magnetic Alloys Produced by Melt Spinning

Kılıçaslan, Muhammed Fatih; Yılmaz, Yasin; Akgül, Bekir; Karataş, Hakan; Vurdu, Can Doğan

doi:10.2478/adms-2021-0026

Abstract

Alloys of FeNiSiB soft magnetic materials containing variable Fe and Ni contents (wt.%) have been produced by melt spinning method, a kind of rapid solidification technique. The magnetic and structural properties of FeNiSiB alloys with soft magnetic properties were investigated by increasing the Fe ratio. X-ray diffraction analysis and SEM images shows that the produced alloy ribbons generally have an amorphous structure, together with also partially nanocrystalline regions. It was observed that the structure became much more amorphous together with increasing Fe content in the composition. Among the alloy ribbons, the highest saturation magnetization was obtained as 0.6 emu/g in the specimen with 50 wt.% Fe. In addition, the highest Curie temperature was observed in the sample containing 46 wt.% Fe.

References

1. I.A. Figueroa, I. Betancourt, G. Lara, J.A. Verduzco, Effect of B, Si and Cr on the mechanical properties of Fe-based amorphous metallic ribbons, J. Non. Cryst. Solids. 351 (2005) 3075–3080. https://doi.org/10.1016/j.jnoncrysol.2005.07.017.10.1016/j.jnoncrysol.2005.07.017
Search in Google Scholar Back to article
2. L. Guo, S. Geng, X. Gao, W. Wang, Numerical simulation of heat transfer and fluid flow during nanosecond pulsed laser processing of Fe78Si9B13 amorphous alloys, Int. J. Heat Mass Transf. 170 (2021). https://doi.org/10.1016/j.ijheatmasstransfer.2021.121003.10.1016/j.ijheatmasstransfer.2021.121003
Search in Google Scholar Back to article
3. A. Inoue, Stabilization of metallic supercooled liquid and bulk amorphous alloys, Acta Mater. 48 (2000) 279–306. https://doi.org/10.1016/S1359-6454(99)00300-6.10.1016/S1359-6454(99)00300-6
Search in Google Scholar Back to article
4. S. Cui, H. Zhai, W. Li, X. Fan, X. Li, W. Ning, D. Xiong, Microstructure and corrosion resistance of Fe-based amorphous coating prepared by detonation spray, Surf. Coat. Technol. 399 (2020) 126096. https://doi.org/10.1016/j.surfcoat.2020.126096.10.1016/j.surfcoat.2020.126096
Search in Google Scholar Back to article
5. M.F. Kilicaslan, S.I. Elburni, B. Akgul, The effects of nb addition on the microstructure and mechanical properties of melt spun Al-7075 alloy, Adv. Mater. Sci. 21 (2021) 17–19. https://doi.org/10.2478/adms-2021-0008.10.2478/adms-2021-0008
Search in Google Scholar Back to article
6. L. Zhu, S.S. Jiang, Z.Z. Yang, G.B. Han, S.S. Yan, Y.G. Wang, Magnetic properties of a Febased amorphous alloy with stress gradient, J. Magn. Magn. Mater. 519 (2021) 167513. https://doi.org/10.1016/j.jmmm.2020.167513.10.1016/j.jmmm.2020.167513
Search in Google Scholar Back to article
7. C. Chang, T. Kubota, A. Makino, A. Inoue, Synthesis of ferromagnetic Fe-based bulk glassy alloys in the Fe–Si–B–P–C system, J. Alloys Compd. 473 (2009) 368–372. https://doi.org/10.1016/j.jallcom.2008.05.088.10.1016/j.jallcom.2008.05.088
Search in Google Scholar Back to article
8. A. Makino, H. Men, T. Kubota, K. Yubota, A. Inoue, FeSiBPCu nanocrystalline soft magnetic alloys with high B_s of 1.9 Tesla produced by crystallizing hetero-amorphous phase, Mater. Trans. 50 (2009) 204-209. https://doi.org/10.2320/matertrans.MER2008306.10.2320/matertrans.MER2008306
Search in Google Scholar Back to article
9. P. Duwez, R. H. Willens, W. Klement, Continuous Series of Metastable Solid Solutions in Silver Copper Alloys, J. Appl. Phys. 31 (1960) 1136. https://doi.org/10.1063/1.1735777.10.1063/1.1735777
Search in Google Scholar Back to article
10. X. Jia, Y. Li, L. Wu, W. Zhang, A study on the role of Ni content on structure and properties of Fe-Ni-Si-B-P-Cu nanocrystalline alloys, J. Alloys Compd. 822 (2020) 152784. https://doi.org/10.1016/j.jallcom.2019.152784.10.1016/j.jallcom.2019.152784
Search in Google Scholar Back to article
11. M. Ohta, Y. Yoshizawa, Cu addition effect on soft magnetic properties in Fe-Si-B alloy system, J. Appl. Phys. 103 (2008) 07E722. 722 (2015). https://doi.org/10.1063/1.2829240.10.1063/1.2829240
Search in Google Scholar Back to article
12. Y. Zhang, P. Sharma, A. Makino, Effects of cobalt addition in nanocrystalline Fe83.3Si4B8P4Cu0.7 soft magnetic alloy, IEEE Trans. Magn. 50 (2014) 2003004.10.1109/TMAG.2013.2286617
Search in Google Scholar Back to article
13. A. Inoue, A. Takeuchi, T. Zhang, Ferromagnetic bulk amorphous alloys, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 29 (1998) 1779–1793. https://doi.org/10.1007/s11661-998-0001-9.10.1007/s11661-998-0001-9
Search in Google Scholar Back to article
14. C. Si, Z. Zhang, Q. Zhang, J. Cai, Influence of mechanical alloying on the particle size, microstructure and soft magnetic properties of coarse Fe-based amorphous powders prepared by gas atomization, J. Non. Cryst. Solids. 559 (2021) 120675. https://doi.org/10.1016/j.jnoncrysol.2021.120675.10.1016/j.jnoncrysol.2021.120675
Search in Google Scholar Back to article
15. S. Cui, G. Ouyang, T. Ma, C. R. Macziewski, V. I. Levitas, L. Zhou, M. J. Kramer, J. Cui, Thermodynamic and kinetic analysis of the melt spinning process of Fe-6.5 wt.% Si alloy, J. Alloys Compd. 771 (2019) 643–648. https://doi.org/10.1016/J.JALLCOM.2018.08.293.10.1016/j.jallcom.2018.08.293
Search in Google Scholar Back to article
16. Y.F. Liang, S. Wang, H. Li, Y.M. Jiang, F. Ye, J. P. Lin, Fabrication of Fe-6.5wt%Si Ribbons by Melt Spinning Method on Large Scale, Adv. Mater. Sci. Eng. 2015 (2015). https://doi.org/10.1155/2015/296197.10.1155/2015/296197
Search in Google Scholar Back to article
17. S. Wang, Y. M. Jiang, Y. F. Liang, F. Ye, J. P. Lin, Magnetic properties and core loss behavior of Fe-6.5wt.%Si ribbons prepared by melt spinning, Adv. Mater. Sci. Eng. 2015 (2015). https://doi.org/10.1155/2015/410830.10.1155/2015/410830
Search in Google Scholar Back to article
18. M. Imani, M. H. Enayati, Investigation of amorphous phase formation in Fe-Co-Si-B-P-Thermodynamic analysis and comparison between mechanical alloying and rapid solidification experiments, J. Alloys Compd. 705 (2017) 462–467. https://doi.org/10.1016/j.jallcom.2017.02.100.10.1016/j.jallcom.2017.02.100
Search in Google Scholar Back to article
19. A. Inoue, T. Masumoto, Mg-based amorphous alloys, Mater. Sci. Eng. A. 173 (1993) 1–8. https://doi.org/10.1016/0921-5093(93)90175-E.10.1016/0921-5093(93)90175-E
Search in Google Scholar Back to article
20. T. Tamura, M. Li, Influencing factors on the amorphous phase formation in Fe–7.7 at% Sm alloys solidified by high-speed melt spinning, J. Alloys Compd. 826 (2020) 154010. https://doi.org/10.1016/j.jallcom.2020.154010.10.1016/j.jallcom.2020.154010
Search in Google Scholar Back to article
21. G. Ennas, M. Magini, F. Padella, P. Susini, G. Boffitto, G. Licheri, Preparation of amorphous Fe-Zr alloys by mechanical alloying and melt spinning methods - Part 1 A structural comparison, J. Mater. Sci. 24 (1989) 3053–3058. https://doi.org/10.1007/BF01139017.10.1007/BF01139017
Search in Google Scholar Back to article
22. C. Wu, K. Lin, Y. Cheng, C. Huang, C. Pan, W. Li, L. Chiang, C. Yeh, S. Fong, Development of Amorphous Ribbon Manufacturing Technology, China Steel Tech. Rep. (2014) 28–42.
Search in Google Scholar Back to article
23. G. Herzer, Modern soft magnets: Amorphous and nanocrystalline materials, Acta Mater. 61 (2013) 718–734. https://doi.org/10.1016/j.actamat.2012.10.040.10.1016/j.actamat.2012.10.040
Search in Google Scholar Back to article
24. X. D. Fan, B.L. Shen, Crystallization behavior and magnetic properties in High Fe content FeBCSiCu alloy system, J. Magn. Magn. Mater. 385 (2015) 277–281. https://doi.org/10.1016/j.jmmm.2015.03.033.10.1016/j.jmmm.2015.03.033
Search in Google Scholar Back to article
25. N. Yodoshi, S. Ookawa, R. Yamada, N. Nomura, K. Kikuchi, A. Kawasaki, Effects of nanocrystallisation on saturation magnetisation of amorphous Fe76Si9B10P5, Mater. Res. Lett. 6 (2018) 100–105. https://doi.org/10.1080/21663831.2017.1398191.10.1080/21663831.2017.1398191
Search in Google Scholar Back to article
26. K. Suzuki, R. Parsons, B. Zang, K. Onodera, H. Kishimoto, T. Shoji, A. Kato, Nanocrystallization of amorphous alloys by ultra-rapid annealing: An effective approach to magnetic softening, J. Alloys Compd. 735 (2018) 613–618. https://doi.org/10.1016/j.jallcom.2017.11.110.10.1016/j.jallcom.2017.11.110
Search in Google Scholar Back to article
27. T. Kulik, Nanocrystallization of metallic glasses, J. Non. Cryst. Solids. 287 (2001) 145–161. https://doi.org/10.1016/S0022-3093(01)00627-5.10.1016/S0022-3093(01)00627-5
Search in Google Scholar Back to article
28. B. A. Luciano, C. S. Kiminami, An amorphous core transformer: Design and experimental performance, Mater. Sci. Eng. A. 226–228 (1997) 1079–1082. https://doi.org/10.1016/s0921-5093(96)10863-7.10.1016/S0921-5093(96)10863-7
Search in Google Scholar Back to article
29. F. Wan, T. Liu, F. Kong, A. Wang, M. Tian, J. Song, J. Zhang, C. Chang, X. Wang, Surface crystallization and magnetic properties of FeCuSiBNbMo melt-spun nanocrystalline alloys, Mater. Res. Bull. 96 (2017) 275–280. https://doi.org/10.1016/j.materresbull.2017.01.026.10.1016/j.materresbull.2017.01.026
Search in Google Scholar Back to article
30. Y. Yoshizawa, S. Oguma, K. Yamauchi, New Fe-based soft magnetic alloys composed of ultrafine grain structure, J. Appl. Phys. 64 (1988) 6044–6046. https://doi.org/10.1063/1.342149.10.1063/1.342149
Search in Google Scholar Back to article
31. J. G. Wang, H. Zhao, C. X. Xie, C. T. Chang, S. M. Zhou, J. Q. Feng, J. T. Huo, W. H. Li, In-situ synthesis of nanocrystalline soft magnetic Fe-Ni-Si-B alloy, J. Alloys Compd. 790 (2019) 524–528. https://doi.org/10.1016/j.jallcom.2019.03.226.10.1016/j.jallcom.2019.03.226
Search in Google Scholar Back to article
32. E. Dastanpour, M. H. Enayati, A. Masood, V. Ström, Crystallization behavior, soft magnetism and nanoindentation of Fe-Si-B-P-Cu alloy on Ni substitution, J. Alloys Compd. 851 (2021) 156727. https://doi.org/10.1016/j.jallcom.2020.156727.10.1016/j.jallcom.2020.156727
Search in Google Scholar Back to article
33. Z. Li, Y. Wu, B. Zhuang, X. Zhao, Y. Tang, X. Ding, Preparation of novel copper-powder-sintered frame / paraffin form-stable phase change materials with extremely high thermal conductivity, Appl. Energy. 206 (2017) 1147–1157. https://doi.org/10.1016/j.apenergy.2017.10.046.10.1016/j.apenergy.2017.10.046
Search in Google Scholar Back to article
34. V. I. Tkatch, A. I. Limanovskii, S. N. Denisenko, S. G. Rassolov, The effect of the melt-spinning processing parameters on the rate of cooling, Mater. Sci. Eng. A. 323 (2002) 91–96. https://doi.org/10.1016/S0921-5093(01)01346-6.10.1016/S0921-5093(01)01346-6
Search in Google Scholar Back to article
35. O. Uzun, M. F. Kılıçaslan, F. Yılmaz, Formation of novel flower-like silicon phases and evaluation of mechanical properties of hypereutectic melt-spun Al-20Si-5Fe alloys with addition of V, Mater. Sci. Eng. A. 607 (2014) 368–375. https://doi.org/10.1016/j.msea.2014.04.025.10.1016/j.msea.2014.04.025
Search in Google Scholar Back to article
36. M. Çelebi, O. Güler, A. Çanakçı, H. Çuvalcı, The effect of nanoparticle content on the microstructure and mechanical properties of ZA27-Al2O3-Gr hybrid nanocomposites produced by powder metallurgy, J. Compos. Mater. 55 (2021) 3395–3408. https://doi.org/10.1177/00219983211015719.10.1177/00219983211015719
Search in Google Scholar Back to article
37. A. H. Karabacak, A. Çanakçı, F. Erdemir, S. Özkaya, M. Çelebi, Effect of different reinforcement on the microstructure and mechanical properties of AA2024-based metal matrix nanocomposites, Int. J. Mater. Res. 111 (2020) 416–423. https://doi.org/10.3139/146.111901.10.3139/146.111901
Search in Google Scholar Back to article
38. A. Inoue, Stabilization of metallic supercooled liquid and bulk amorphous alloys, Acta Mater. 48 (2000) 279-306. https://doi.org/10.1016/S1359-6454(99)00300-6.10.1016/S1359-6454(99)00300-6
Search in Google Scholar Back to article
39. Y. L. Li, Z. X. Dou, X. M. Chen, K. Lv, F. S. Li, X.D. Hui, Improving the amorphous forming ability and magnetic properties of FeSiBPCu amorphous and nanocrystalline alloys by utilizing carbon, J. Alloys Compd. 844 (2020). https://doi.org/10.1016/j.jallcom.2020.155767.10.1016/j.jallcom.2020.155767
Search in Google Scholar Back to article
40. A. Inoue, A. Takeuchi, T. Zhang, A. Murakami, Soft Magnetic Properties of Bulk Fe-Based Amorphous Alloys Prepared by Copper Mold Casting, IEEE Trans. Magn. 32 (1996) 4866–4871.10.1109/20.539178
Search in Google Scholar Back to article
41. A. Takeuchi, A. Inoue, Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying Element, Mater. Trans. 46 (2005) 2817-2829. https://doi.org/10.2320/matertrans.46.2817.10.2320/matertrans.46.2817
Search in Google Scholar Back to article
42. M. Ipatov, V. Zhukova, L. Dominguez, K.L. Alvarez, A. Chizhik, A. Zhukov, J. Gonzalez, Structural and low-temperature magnetic properties of as-quenched and annealed Ni–Si–B alloys produced by rapid solidification, Intermetallics. 132 (2021) 107140. https://doi.org/10.1016/j.intermet.2021.107140.10.1016/j.intermet.2021.107140
Search in Google Scholar Back to article
43. B. Q. Chi, C. Li, Z.H. Huang, Mixing entropy difference between liquid and crystal of Fe base amorphous alloys, J Non Cryst Solids. 402 (2014) 178–181. https://doi.org/10.1016/j.jnoncrysol.2014.05.032.10.1016/j.jnoncrysol.2014.05.032
Search in Google Scholar Back to article
44. L. Shi, X. Qin, K. Yao, Tailoring soft magnetic properties of Fe-based amorphous alloys through C addition, Prog. Nat. Sci. Mater. Int. 30 (2020) 208–212. https://doi.org/10.1016/j.pnsc.2020.02.001.10.1016/j.pnsc.2020.02.001
Search in Google Scholar Back to article
45. Q. Liu, H. Liu, M. Wang, Y. Zhang, Z. Ma, Y. Zhao, W. Yang, Effects of Ni substitution for Fe on magnetic properties of Fe_{80 - x}Ni_xP₁₃C₇ (x = 0-30) glassy ribbons, J. Non. Cryst. Solids. 463 (2017) 68–71. https://doi.org/10.1016/j.jnoncrysol.2017.03.005.10.1016/j.jnoncrysol.2017.03.005
Search in Google Scholar Back to article
46. J. Zhou, W. Yang, C. Yuan, B. Sun, B. Shen, Ductile FeNi-based bulk metallic glasses with high strength and excellent soft magnetic properties, J. Alloys Compd. 742 (2018) 318–324. https://doi.org/10.1016/j.jallcom.2018.01.317.10.1016/j.jallcom.2018.01.317
Search in Google Scholar Back to article
47. H. R. Lashgari, D. Chu, S. Xie, H. Sun, M. Ferry, S. Li, Composition dependence of the microstructure and soft magnetic properties of Fe-based amorphous/nanocrystalline alloys: A review study, J. Non-Cryst. Solids. 391 (2014) 61–82. https://doi.org/10.1016/j.jnoncrysol.2014.03.010.10.1016/j.jnoncrysol.2014.03.010
Search in Google Scholar Back to article
48. T. Mizoguchi, K. Yamauchi, H. Miyajima, Ferromagnetism of Amorphous Iron Alloys. Proceedings of the International Symposium on Amorphous Magnetism, Detroit, Michigan, USA, 1973, 325–330. https://doi.org/10.1007/978-1-4613-4568-8_35.10.1007/978-1-4613-4568-8_35
Search in Google Scholar Back to article
49. W. Yang, H. Liu, L. Xue, J. Li, C. Dun, J. Zhang, Magnetic properties of (Fe_1-xNix)₇₂B₂₀Si₄Nb₄ (x=0.0–0.5) bulk metallic glasses, J. Magn. Magn. Mater. 335 (2013) 172–176. https://doi.org/10.1016/j.jmmm.2013.02.004.10.1016/j.jmmm.2013.02.004
Search in Google Scholar Back to article
50. W. Yang, H. Liu, Y. Zhao, A. Inoue, K. Jiang, J. Huo, H. Ling, Q. Li, B. Shen, Mechanical properties and structural features of novel Fe-based bulk metallic glasses with unprecedented plasticity, Sci. Rep. 6233 (2014) 1-6. https://doi.org/10.1038/srep06233.10.1038/srep06233538582425167887
Search in Google Scholar Back to article
51. A. Mitra, R.K. Roy, B. Mahato, A.K. Panda, G. Vlasak, D. Janickovic, P. Svec, Development of FeSiB/CoSiB Bilayered Melt-spun Ribbon by Melt-spinning Technique, J. Supercond. Nov. Magn. 2010 241. 24 (2010) 611–615. https://doi.org/10.1007/S10948-010-0955-X.10.1007/s10948-010-0955-x
Search in Google Scholar Back to article

Effect of Fe-Ni Substitution in FeNiSiB Soft Magnetic Alloys Produced by Melt Spinning

Abstract

Paradigm

My account