The influence of quartz powder addition on the production of paving blocks
By: Aryanto, Erwin Sutandar
and Joewono Prasetijo
and Joewono Prasetijo 
References
- Abouhelal, D., Kamel, W., & Bassioni, H. (2023). Informatic analysis and review of literature on the optimum selection of sustainable materials used in construction projects: Critical review. International Journal of Sustainable Construction Engineering and Technology, 14(1), 97–109.
https://doi.org/10.30880/ijscet.2023.14.01.011 - Arya, A., & Sahu, L. K. (2024). Sustainability in technological advancements. International Journal for Multidisciplinary Research, 6(1), 2–6.
https://doi.org/10.36948/ijfmr.2024.v06i01.12528 - Aslami, M. (2023). Key role of construction industry in achieving the goal of sustainable energy worldwide. E3S Web of Conferences, 457, 02061.
https://doi.org/10.1051/e3sconf/202345702061 - ASTM International [ASTM]. (2023). Concrete cylinder compressive strength testing (ASTM C39).
- Awolusi, T., Oguntayo, D., Deifalla, A. F., Babalola, E., Natie, F., Aladegboye, O., & Azab, M. (2023). Utilization of bitumen modified with pet bottles as an alternative binder for the production of paving blocks. Civil Engineering Journal, 9(1), 104–113.
http://dx.doi.org/10.28991/CEJ-2023-09-01-08 - Badan Standardisasi Nasional [BSN]. (1990). Analisa saringan agregat halus dan kasar (SNI 03-1968).
https://www.academia.edu/45603892/SNI_03_1968_1990_Analisa_Saringan_Agregat_Halus_dan_Kasar - Badan Standardisasi Nasional [BSN]. (1996). Bata beton (paving block) (SNI 03-0691).
https://spada.uns.ac.id/pluginfile.php/110917/mod_resource/content/1/sni-03-0691-1996-paving-block.pdf - Blok, R., Kuit, B., Schröder, T., & Teuffel, P. (2019, September 4–6). Bio-based construction materials for a sustainable future. In 20th Congress of IABSE, New York City 2019: The Evolving Metropolis, New York City, USA.
https://doi.org/10.2749/newyork.2019.0859 - British Standards Institution [BSI]. (2011). Testing concrete – method for determination of water absorption (BS 1881-122).
- Dinas Energi dan Sumber Daya Mineral Provinsi Jawa Barat (2018). Rancangan Perubahan Rencana Strategis Dinas Energi dan Sumber Daya Mineral Provinsi Jawa Barat 2018–2023.
https://esdm.jabarprov.go.id/wp-content/uploads/2019/09/RANCANGAN-PERUBAH-AN-RENSTRA-DESDM-2018-2023.pdf - Falah, M. D. & Muzaki (2020). Sumber daya mineral pasir kuarsa sebagai alternative pengembangan usaha pertambangan di daerah kading kabupaten barru. UNM Environmental Journals, 3(2), 69–77.
https://doi.org/10.26858/uej.v3i2.15034 - Harimukti, M. R. N. (2022). Komparasi mutu paving block penambahan abu batu antara metode mekanis dan konvensional [Comparison of the quality of paving block with additional stone dust between the mechanical and conventional method]. Universitas Islam Indonesia.
https://dspace.uii.ac.id/handle/123456789/41553 - Jaya, R. P., Munirwan, R. P., & Bunyamin, B. (2025). Challenges and solutions for using waste materials in various construction applications. Smart and Green Materials, 1(2), 169–171.
https://doi.org/10.70028/sgm.v1i2.22 - Megawati, F. (2018). Pengaruh penggunaan pasir silika sebagai filler (bahan pengisi) pada pembuatan paving block. Tugas Akhir Teknik Sipil Sarjana.
- Milang, I. A. K., & Masagala, A. A. (2022). Pemanfaatan abu batu sebagai campuran agregat halus dengan persentase 70%, 80%, 90% dan serbuk bata merah 10% terhadap kuat tekan paving block [Utilization of stone ash as a mixture of fine aggregate with a percentage of 70%, 80%, 90% and red brick powder 10% on the compressive strength of paving block]. University Technology Yogyakarta.
- Mulyati, M. (2023). Penggunaan abu batu dan split dalam pembuatan paving block. Jurnal Teknologi Dan Vokasi, 1(1), 1–5.
https://doi.org/10.21063/jtv.2023.1.1.1-5 - Mulyati, M., & Jovari, I. F. (2024). Penggunaan pasir silika sebagai bahan pembuatan paving block. Jurnal Teknologi dan Vokasi, 2(1), 85–91.
https://doi.org/10.21063/jtv.2024.2.1.85-91 - Nabila, L., Supriyadi, A., & Sutandar, E. (2023). Experimental study on increasing the characteristics of porous concrete with the addition of silica fume. SCIREA Journal of Civil Engineering and Building Construction, 8(4), 134–148.
https://doi.org/10.54647/cebc560128 - Nugroho, I. D. (2020). Pemanfaatan abu batu dalam pembuatan paving block dengan metode tekanan. Universitas Muhammadiyah Surakarta.
https://eprints.ums.ac.id/86276/13/Naskah%20Publikasi.pdf - Nofrianto, H., & Hutrio, H. (2023). Analisis mutu paving block dengan variasi agregat halus [Quality analysis of paving block with fine aggregate variation]. Jurnal Teknologi dan Vokasi, 1(1), 54–62.
https://doi.org/10.21063/jtv.2023.1.1.54-62 - Pradhipta, R. (2022). Analisis pengaruh penggunaan abu batu sebagai substitusi parsial agregat halus terhadap karakteristik beton pada mutu 30 MPa [Influence of stone dust as a substitution partial of fine aggregate on the 30 MPa concrete]. Universitas Islam Indonesia.
https://dspace.uii.ac.id/handle/123456789/39226 - Ramanna, T. R., Venkatesh, M. P., & Manohar, G. (2024). Critical barriers to sustainable construction technology adoption in developing countries – A case study in India. International Research Journal on Advanced Engineering Hub, 2(2), 271–286.
https://doi.org/10.47392/IRJAEH.2024.0043 - Shurrab, J., Hussain, M., & Khan, M. (2019). Green and sustainable practices in the construction industry: A confirmatory factor analysis approach. Engineering, Construction and Architectural Management, 26(6), 1063–1086.
https://doi.org/10.1108/ECAM-02-2018-0056 - Sutandar, E., & Budi, G. S. (2024). Study of the effect of mineral admixture addition on paving blocks’ physical and mechanical properties. Jurnal Teknik Sipil, 24(2), 941–956.
https://doi.org/10.26418/jts.v24i1.76545 - Sylvester, T. (2017). Modular pavement system.
https://patents.google.com/patent/US20170191227A1/en - Tw, A. R. P., Irianti, L., Sebayang, S., & Isneini, M. (2023). Pengaruh Penggunaan Ordinary Portland Cement (OPC), Semen Modifikasi Jenis III dan Jenis IV, dan Portland Composite Cement (PCC) Terhadap Kuat Tekan Beton. Jurnal Rekayasa Sipil dan Desain, 11(4), 703–714.
https://doi.org/10.23960/jrsdd.v11i4.3759 - Umurrudin, A., Khatulistiani, U., & Machmoed, S. P. (2018). Pasir kuarsa tuban sebagai bahan substitusi semen dan batu pecah substitusi pasir untuk campuran paving. Axial: Jurnal Rekayasa dan Manajemen Konstruksi, 6(1), 47–56.
http://dx.doi.org/10.30742/axial.v6i1.474 - Wang, X. (2025). Application of environmentally friendly building materials in urban construction. Applied and Computational Engineering, 126(1), 155–161.
https://doi.org/10.54254/2755-2721/2025.20030 - Winanda, F. A. (2018). Pengaruh penambahan pecahan cangkang siput sebgai pengganti agregat terhadap kuat tekan paving block. Universitas Medan Area.
https://id.scribd.com/doc/191906913/SNI-03-0691-1996 - You, Z., Dai, Q., & Xiao, F. (2018). Advanced paving materials and technologies. Applied Sciences, 8(4), 588.
https://doi.org/10.3390/app8040588
Language: English
Page range: 221 - 240
Submitted on: May 2, 2025
Accepted on: Jul 12, 2025
Published on: Sep 30, 2025
Published by: Warsaw University of Life Sciences - SGGW Press
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2025 Aryanto, Erwin Sutandar, Joewono Prasetijo, published by Warsaw University of Life Sciences - SGGW Press
This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 License.