References
- Klote, J.H., Milke, J.A., Turnbull, P.G., Kashef, A., Ferreira, M.J. (2012). Handbook of Smoke Control Engineering. ASHRAE, Atlanta, GA.
- Mowrer, F.W. (2009). Driving forces for smoke movement and management. Fire Technology 45, 147–162.
- Król, M., Król, A. (2017). Wind influence on a building with the natural smoke removal system. Architecture Civil Engineering Environment 3(10), 119–126.
- McGrattan, K. Hostikka, S. McDermott, R. Floyd, J. Weinschenk C., Overholt, K. (2015). NIST Special Publication 1019 Fire Dynamics Simulator User’s Guide Version 6, National Institute of Standards and Technology.
- Ayala, P., Cantizano, A., Gutierrez-Montes, C., Rein, G. (2013). Influence of atrium roof geometries on the numerical predictions of fire tests under natural ventilation conditions. Energy and Buildings 65, 382–390.
- Capote, J.A., Alvear, D., Abreu, O.V., Lazaro, M., Espina, P. (2009). Scale tests of smoke filling in large atria. Fire Technology 45, 201–220.
- Ray, S.D., Gong, N.-W., Glicksman, L.R., Paradiso, J.A. (2014). Experimental characterization of full-scale naturally ventilated atrium and validation of CFD simulations. Energy and Buildings 69, 285–291. doi:10.1016/j.enbuild.2013.11.018
- Rundle, C.A., Lightstone, M.F., Oosthuizen, P., Mouriki, E., (2011). Validation of computational fluid dynamics simulations for atria geometries. Building and Environment 46, 1343–1353.
- Tilley, N., Merci, B. (2009). Application of FDS to adhered spill plumes in atria. Fire Technology 45, 179–188.
- Tilley, N., Merci, B. (2013). Numerical study of smoke extraction for adhered spill plumes in atria: impact of extraction rate and geometrical parameters. Fire Safety Journal 55, 106–115.
- Tilley, N., Rauwoens, P., Merci, B. (2011). Verification of the accuracy of CFD simulation in small-scale tunnel and atrium fire configurations. Fire Safety Journal 46, 186–193.
- Yang, P., Tan, X., Xin, W. (2011). Experimental study and numerical simulation for a storehouse fire accident. Building and Environment 46, 1445–1459.
- Xiao, B. (2012). Comparison of numerical and experimental results of fire induced doorway flows. Fire Technology 48, 595–614.
- Król M. (2016). Numerical studies on the wind effects on natural smoke venting of atria. International Journal of Ventilation 15, 67–78.
- Król M., Król A. (2017). Multi-criteria numerical analysis of factors influencing the efficiency of natural smoke venting of atria. Journal of Wind Engineering & Industrial Aerodynamics 170, 149–161.
- Węgrzyński W., Krajewski G. (2017). Combined Wind Engineering, Smoke Flow and Evacuation Analysis for a Design of a Natural Smoke and Heat Ventilation System. Procedia Engineering 172, 1243–1251.
- Alaya P., Cantizano A., Rien G., Vigne G., Gutierrez-Montes C. (2016). Fire Experiments and Simulations in a Full-Scale Atrium Under Transient and Asymmetric Venting Conditions. Fire Technology 52, 51–78.
- Gutierrez-Montes C., Sanmiguel-Rojas E., Burgos M.A., Viedma A. (2012). On the fluid dynamics of the make-up inlet air and the prediction of anomalous fire dynamics in a large-scale facility. Fire Safety Journal 51, 27–41.
- Gutierrez-Montes C., Sanmiguel-Rojas E., Kaiser A.S., Viedma A. (2008). Numerical model and validation experiments of atrium enclosure fire in a new fire test facility. Building and Environment 43, 1912–1928.
- Gutierrez-Montes C., Sanmiguel-Rojas E., Viedma A. (2010). Influence of different makeup air configurations on the fire-induced conditions in an atrium. Building and Environment 45, 2458–2472.
- Gutierrez-Montes C., Sanmiguel-Rojas E., Viedma A., Rien G. (2009). Experimental data and numerical modeling of 1.3 and 2.3 MW fires in a 20 cubic atrium. Building and Environment 44, 1827–1839.