References
- 1. Foray, P., Bałachowski, L., Colliat , J -L.? : Bearing capacity of model piles driven into dense over-consolidated sand. Canadian Geotechnical Journal, 1998, 35(2), pp. 374-385, 10.1139/t97-082.
- 2. Tsuha, C. D. H. C., Aoki, N., Rault, G., Thorel, L., & Garnier, J. Evaluation of the efficiencies of helical anchor plates in sand by centrifuge model tests. Canadian Geotechnical Journal, 2012, 49(9), pp. 1102-1114.
- 3. Fioravante, V. : Load transfer from a raft to a pile with an interposed layer. Géotechnique, 2011, 61(2), pp.121-132.
- 4. Le Kouby, A., Dupla, J. C., Canou, J., & Francis, R.: The effects of installation order on the response of a pile group in silica sand. Soils and Foundations, 2016, 56(2), pp.174-188.
- 5. Falborski T., Jankowski R.: Polymeric Bearings - A New Base Isolation System to Reduce Structural Damage during Earthquakes. 10th International Conference on Damage Assessment of Structures (DAMAS), 2013. http://www.scientific.net/KEM.569-570.143
- 6. Jankowski R.: Experimental study on earthquake-induced pounding between structural elements made of different building materials. Earthquake Engineering & Structural Dynamics, 2010, Vol. 39, Issue 3, pp. 343-354, DOI: 10.1002/eqe.941
- 7. Kozaczka E., Grelowska G., Kozaczka S.: Images of the Seabed of the Gulf of Gdansk Obtained by Means of the Parametric Sonar. Acta Physica Polonica A., 2010,Vol. 118, No.1, pp. 91-94
- 8. Grelowska G., Kozaczka E.: Sounding of Layered Marine Bottom - Model Investigations. Acta Physica Polonica A., 2010,Vol. 118, No.1, pp. 66-70.
- 9. Grelowska G., Kozaczka E., Nowicki A., Kozaczka S.: Investigation of Transmit and Receive Characteristics of Laboratory Model for the Parametric Echosounder. Acta Physica Polonica A., 2013,Vol. 123, No.6 , pp. 1094-1097.
- 10. Ghionna, V.N., Jamiolkowski, M. : A critical appraisal of calibration chamber testing in sands. Proceedings of the 1st International Conference on Calibration Chamber Testing, Clarkson Univ., Potsdam, USA, 1991. Edited by A.-B. Huang, pp. 13-37.
- 11. Dijkstra, J., Gaudin, C., & White, D. J. : Comparison of failure modes below footings on carbonate and silica sands. International Journal of Physical Modelling in Geotechnics , 2013, 13 (1).
- 12. Hazarika, H., Kohama, E. and Sugano, T.: Underwater shake table on waterfront structures protected with tire chips cushion. J. Geotechnical and Geoenvironmental Engineering, (ASCE), 2008, Vol. 134, No.12.
- 13. Mahmoud S., Abd-Elhameed A., Mahmoud S., Jankowski R.: Earthquake-induced pounding between equal height multi-storey buildings considering soil-structure interaction. Bulletin of Earthquake Engineering, 2013, Vol. 11, Issue 4 , pp.1021-1048. http://link.springer.com/10.1007/s10518-012-9411-6
- 14. Dymarski C., Dymarski P.: Developing Methodology for Model Tests of Floating Platforms in Low -Depth Towing Tank. Archives of Civil and Mechanical Engineering, 2016, Vol. 16, Issue 1, pp. 159-167
- 15. Garnier, J., Gaudin, C., Springman, S. M., Culligan, P. J., Goodings, D., Konig, D., ... & Thorel, L. : Catalogue of scaling laws and similitude questions in geotechnical centrifuge modelling. International Journal of Physical Modelling in Geotechnics, 2007, 7(3), 1.
- 16. Konkol, J. : Derivation of the scaling laws used in geotechnical centrifuge modelling-application of dimensional analysis and Buckingham Π theorem. Technical Sciences/ University of Warmia and Mazury, Olsztyn , 2014.
- 17. Foray, P., Bałachowski, L., & Rault, G. : Scale effect in shaft friction due to the localization of deformations. In Proceedings of the international conference on centrifuge ,Tokyo, 1998, Vol. 98, pp. 211-216.
- 18. Madabhushi, G. : Centrifuge Modelling for Civil Engineers. CRC Press.
- 19, 2015, http://eurofuge2016.ifsttar.fr
- 20. Bayton, S.M., Black, J.A. : The effect of soil density on offshore wind turbine monopile foundation performance. Proc. of 3rd European Conference on Physical Modelling in Geotechnics, Eurofuge 2016, Nantes, pp. 239-244.
- 21. Loli, M., Kassas, K. & Anastasopoulos, I. : Centrifuge testing of a hybrid foundation for offshore wind turbines: experimental technique and preliminary results. Proc. of 3rd European Conference on Physical Modelling in Geotechnics, Eurofuge 2016, Nantes, pp. 263-268.
- 22. Blanc, M., Thorel, L., Isorna, R., Dano, C., Kotronis, P., Philippe, M. : Centrifuge investigation of axial cyclic behaviour of a single pile used for the foundation of a jacket type offshore wind turbine. Proc. Frontiers in offshore geotechnics, ISFOG 2015, Oslo, Norway, CRC Press, pp. 521-526.
- 23. Bałachowski, L. : Size effect in centrifuge cone penetration tests. Archives of Hydro-Engineering and Environmental Mechanics, 2007, 54(3), pp. 161-181.
- 24. Bałachowski, L. Physical modelling in sands in a wide range of stress level: Application to the calibration of CPTU and DMT tests. Wydawnictwo Politechniki Gdańskiej, Gdańsk 2008.
- 25. Bałachowski, L. : Penetration resistance of Lubiatowo sand in calibration chamber tests. Archives of Hydro- Engineering and Environmental Mechanics, 2006, 53(4), pp. 311-329.
- 26. Mortara, G., Mangiola, A., & Ghionna, V. N. : Cyclic shear stress degradation and post-cyclic behaviour from sandsteel interface direct shear tests. Canadian Geotechnical Journal, 2007, 44(7), pp. 739-752.
- 27. Dymarski C., Dymarski P., Żywicki J.: Design and strength calculations of the tripod support structure for offshore power plant. Polish Maritime Research , 2015,Vol. 22, No.1(85), pp. 36-46.