Physical Modelling of Geotechnical Structures in Ports and Offshore

Lech Bałachowski

doi:10.1515/pomr-2017-0014

.blurhash-client-img { display: none !important; }

Physical Modelling of Geotechnical Structures in Ports and Offshore

Polish Maritime Research

Volume 24 (2017): Issue s1 (April 2017)

By: Lech Bałachowski

Open Access

|May 2017

Abstract

The physical modelling of subsoil behaviour and soil-structure interaction is essential for the proper design of offshore structures and port infrastructure. A brief introduction to such modelling of geoengineering problems is presented and some methods and experimental devices are described. The relationships between modelling scales are given. Some examples of penetration testing results in centrifuge and calibration chamber are presented. Prospects for physical modelling in geotechnics are also described.

References

1. Foray, P., Bałachowski, L., Colliat , J -L.? : Bearing capacity of model piles driven into dense over-consolidated sand. Canadian Geotechnical Journal, 1998, 35(2), pp. 374-385, 10.1139/t97-082.10.1139/t97-082
Search in Google Scholar Back to article
2. Tsuha, C. D. H. C., Aoki, N., Rault, G., Thorel, L., & Garnier, J. Evaluation of the efficiencies of helical anchor plates in sand by centrifuge model tests. Canadian Geotechnical Journal, 2012, 49(9), pp. 1102-1114.10.1139/t2012-064
Search in Google Scholar Back to article
3. Fioravante, V. : Load transfer from a raft to a pile with an interposed layer. Géotechnique, 2011, 61(2), pp.121-132.10.1680/geot.7.00187
Search in Google Scholar Back to article
4. Le Kouby, A., Dupla, J. C., Canou, J., & Francis, R.: The effects of installation order on the response of a pile group in silica sand. Soils and Foundations, 2016, 56(2), pp.174-188.10.1016/j.sandf.2016.02.002
Search in Google Scholar Back to article
5. Falborski T., Jankowski R.: Polymeric Bearings - A New Base Isolation System to Reduce Structural Damage during Earthquakes. 10th International Conference on Damage Assessment of Structures (DAMAS), 2013. http://www.scientific.net/KEM.569-570.14310.4028/www.scientific.net/KEM.569-570.143
Search in Google Scholar Back to article
6. Jankowski R.: Experimental study on earthquake-induced pounding between structural elements made of different building materials. Earthquake Engineering & Structural Dynamics, 2010, Vol. 39, Issue 3, pp. 343-354, DOI: 10.1002/eqe.94110.1002/eqe.941
Search in Google Scholar Back to article
7. Kozaczka E., Grelowska G., Kozaczka S.: Images of the Seabed of the Gulf of Gdansk Obtained by Means of the Parametric Sonar. Acta Physica Polonica A., 2010,Vol. 118, No.1, pp. 91-9410.12693/APhysPolA.118.91
Search in Google Scholar Back to article
8. Grelowska G., Kozaczka E.: Sounding of Layered Marine Bottom - Model Investigations. Acta Physica Polonica A., 2010,Vol. 118, No.1, pp. 66-70.10.12693/APhysPolA.118.66
Search in Google Scholar Back to article
9. Grelowska G., Kozaczka E., Nowicki A., Kozaczka S.: Investigation of Transmit and Receive Characteristics of Laboratory Model for the Parametric Echosounder. Acta Physica Polonica A., 2013,Vol. 123, No.6 , pp. 1094-1097.10.12693/APhysPolA.123.1094
Search in Google Scholar Back to article
10. Ghionna, V.N., Jamiolkowski, M. : A critical appraisal of calibration chamber testing in sands. Proceedings of the 1st International Conference on Calibration Chamber Testing, Clarkson Univ., Potsdam, USA, 1991. Edited by A.-B. Huang, pp. 13-37.
Search in Google Scholar Back to article
11. Dijkstra, J., Gaudin, C., & White, D. J. : Comparison of failure modes below footings on carbonate and silica sands. International Journal of Physical Modelling in Geotechnics , 2013, 13 (1).10.1680/ijpmg.12.00004
Search in Google Scholar Back to article
12. Hazarika, H., Kohama, E. and Sugano, T.: Underwater shake table on waterfront structures protected with tire chips cushion. J. Geotechnical and Geoenvironmental Engineering, (ASCE), 2008, Vol. 134, No.12.10.1061/(ASCE)1090-0241(2008)134:12(1706)
Search in Google Scholar Back to article
13. Mahmoud S., Abd-Elhameed A., Mahmoud S., Jankowski R.: Earthquake-induced pounding between equal height multi-storey buildings considering soil-structure interaction. Bulletin of Earthquake Engineering, 2013, Vol. 11, Issue 4 , pp.1021-1048. http://link.springer.com/10.1007/s10518-012-9411-610.1007/s10518-012-9411-6
Search in Google Scholar Back to article
14. Dymarski C., Dymarski P.: Developing Methodology for Model Tests of Floating Platforms in Low -Depth Towing Tank. Archives of Civil and Mechanical Engineering, 2016, Vol. 16, Issue 1, pp. 159-16710.1016/j.acme.2015.07.003
Search in Google Scholar Back to article
15. Garnier, J., Gaudin, C., Springman, S. M., Culligan, P. J., Goodings, D., Konig, D., ... & Thorel, L. : Catalogue of scaling laws and similitude questions in geotechnical centrifuge modelling. International Journal of Physical Modelling in Geotechnics, 2007, 7(3), 1.10.1680/ijpmg.2007.070301
Search in Google Scholar Back to article
16. Konkol, J. : Derivation of the scaling laws used in geotechnical centrifuge modelling-application of dimensional analysis and Buckingham Π theorem. Technical Sciences/ University of Warmia and Mazury, Olsztyn , 2014.
Search in Google Scholar Back to article
17. Foray, P., Bałachowski, L., & Rault, G. : Scale effect in shaft friction due to the localization of deformations. In Proceedings of the international conference on centrifuge ,Tokyo, 1998, Vol. 98, pp. 211-216.
Search in Google Scholar Back to article
18. Madabhushi, G. : Centrifuge Modelling for Civil Engineers. CRC Press.
Search in Google Scholar Back to article
19, 2015, http://eurofuge2016.ifsttar.fr
Search in Google Scholar Back to article
20. Bayton, S.M., Black, J.A. : The effect of soil density on offshore wind turbine monopile foundation performance. Proc. of 3rd European Conference on Physical Modelling in Geotechnics, Eurofuge 2016, Nantes, pp. 239-244.
Search in Google Scholar Back to article
21. Loli, M., Kassas, K. & Anastasopoulos, I. : Centrifuge testing of a hybrid foundation for offshore wind turbines: experimental technique and preliminary results. Proc. of 3rd European Conference on Physical Modelling in Geotechnics, Eurofuge 2016, Nantes, pp. 263-268.
Search in Google Scholar Back to article
22. Blanc, M., Thorel, L., Isorna, R., Dano, C., Kotronis, P., Philippe, M. : Centrifuge investigation of axial cyclic behaviour of a single pile used for the foundation of a jacket type offshore wind turbine. Proc. Frontiers in offshore geotechnics, ISFOG 2015, Oslo, Norway, CRC Press, pp. 521-526.10.1201/b18442-65
Search in Google Scholar Back to article
23. Bałachowski, L. : Size effect in centrifuge cone penetration tests. Archives of Hydro-Engineering and Environmental Mechanics, 2007, 54(3), pp. 161-181.
Search in Google Scholar Back to article
24. Bałachowski, L. Physical modelling in sands in a wide range of stress level: Application to the calibration of CPTU and DMT tests. Wydawnictwo Politechniki Gdańskiej, Gdańsk 2008.
Search in Google Scholar Back to article
25. Bałachowski, L. : Penetration resistance of Lubiatowo sand in calibration chamber tests. Archives of Hydro- Engineering and Environmental Mechanics, 2006, 53(4), pp. 311-329.
Search in Google Scholar Back to article
26. Mortara, G., Mangiola, A., & Ghionna, V. N. : Cyclic shear stress degradation and post-cyclic behaviour from sandsteel interface direct shear tests. Canadian Geotechnical Journal, 2007, 44(7), pp. 739-752.10.1139/t07-019
Search in Google Scholar Back to article
27. Dymarski C., Dymarski P., Żywicki J.: Design and strength calculations of the tripod support structure for offshore power plant. Polish Maritime Research , 2015,Vol. 22, No.1(85), pp. 36-46. 10.1515/pomr-2015-0006
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.1515/pomr-2017-0014 | Journal eISSN: 2083-7429 | Journal ISSN: 1233-2585

Journal RSS Feed

Language: English

Page range: 4 - 9

Published on: May 23, 2017

Published by: Gdansk University of Technology

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

Related subjects:

Introductions and overviews,

Engineering, other,

Geosciences,

Atmospheric science and climatology,

Life sciences,

Life sciences, other

© 2017 Lech Bałachowski, published by Gdansk University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 24 (2017): Issue s1 (April 2017)