Have a personal or library account? Click to login
An Experimental Study of Emission and Combustion Characteristics of Marine Diesel Engine in Case of Cylinder Valves Leakage Cover

An Experimental Study of Emission and Combustion Characteristics of Marine Diesel Engine in Case of Cylinder Valves Leakage

Polish Maritime Research
Volume 22 (2015): Issue 3 (September 2015)
By: Jerzy Kowalski  
Open Access
|Oct 2015

References

  1. 1. J. Carlton: Marine Propellers and Propulsion. Third Ed., Elsevier Ltd., 2012.10.1016/B978-0-08-097123-0.00010-1
    Search in Google Scholar
  2. 2. International Safety Guide for Oil Tankers and Terminals. ICS, OCIMF, IAPH, 2006.
    Search in Google Scholar
  3. 3. R. Pawletko, S. Polanowski: Research of the influence of marine diesel engine Sulzer AL 25/30 load on the TDC position on the indication graph, Journal of KONES , Powertrain and Transport 17 ,2010, pp. 361 - 368.
    Search in Google Scholar
  4. 4. R. Pawletko, S. Polanowski : Influence of gas channels of medium speed marine engines on the accuracy of determination of diagnostic parameters based on the indicator diagrams. Journal of Polish CIMAC 7,2012, pp. 139 - 146.
    Search in Google Scholar
  5. 5. Marine Engine IMO Tier II Programme 2013
    Search in Google Scholar
  6. 6. A. Sarvi, C. J. Fogelholm, R. Zevenhoven : Emissions from large-scale medium-speed diesel engines: 1. Influence of engine operation mode and turbocharger.Fuel processing technology 89 , 2008, pp. 510 - 519.10.1016/j.fuproc.2007.10.006
    Search in Google Scholar
  7. 7. A. Sarvi, C. J. Fogelholm, R. Zevenhoven: Emissions from large-scale medium-speed diesel engines: 2. Influence of fuel type and operating mode. Fuel processing technology 89, 2008, pp. 520 - 527.10.1016/j.fuproc.2007.10.005
    Search in Google Scholar
  8. 8. A. Sarvi, R. Zevenhoven : Large-scale diesel engine emission control parameters. Energy 35 , 2010, pp. 1139-1145.10.1016/j.energy.2009.06.007
    Search in Google Scholar
  9. 9. J.M. Desantes, J. Benajes, S. Molina, C.A. Gonzalez : The modification of the fuel injection rate in heavy-duty diesel engines. Part 1: Effects on engine performance and emissions. Applied Thermal Engineering 24 , 2004, pp. 2701-2714.
    Search in Google Scholar
  10. 10. J.M. Desantes, J. Benajes, S. Molina, C.A. Gonzalez: The modification of the fuel injection rate in heavy-duty diesel engines. Part 2: Effects on combustion. Applied Thermal Engineering 24 ,2004, pp. 2715-2726.
    Search in Google Scholar
  11. 11. G.A. Weiser: Modeling of Combustion and Nitric Oxide Formation for Medium-Speed DI Diesel Engines: A Comparative Evaluation of Zero- and Three-Dimensional Approaches. Doctor’s Thesis, Swiss Federal Institute of Technology , Zurich, 2001.
    Search in Google Scholar
  12. 12. J. Huang, L. Lin, Y. Wang, J. Qin, A. P. Roskilly, L. Li, T. Ouyang, Y. Yu : Experimental study of the performance and emission characteristics of diesel engine using direct and indirect injection systems and different fuels. Fuel Processing Technology 92 , 2011, pp. 1380-1386.10.1016/j.fuproc.2011.03.001
    Search in Google Scholar
  13. 13. K. Verbiezen, A.J. Donkerbroek, R.J.H. Klein-Douwel, A.P. van Vliet, P.J.M. Frijters, X.L.J. Seykens, R.S.G. Baert, W.L. Meerts, N.J. Dam, J.J. ter Meulen: Diesel combustion: In-cylinder NO concentrations in relation to injection timing. Combustion and Flame 151 , 2007, pp. 333-346.10.1016/j.combustflame.2007.05.005
    Search in Google Scholar
  14. 14. E. Buyukkaya, M. Cerit: Experimental study of NOx emissions and injection timing of a low heat rejection diesel engine. International Journal of Thermal Sciences 47 , 2008, pp.1096-1106.10.1016/j.ijthermalsci.2007.07.009
    Search in Google Scholar
  15. 15. T. Thurnheer, D. Edenhauser, P. Soltic, D. Schreiber, P. Kirchen, A. Sankowski : Experimental investigation on different injection strategies in a heavy-duty diesel engine: Emissions and loss analysis. Energy Conversion and Management 52 , 2011, pp. 457-467.10.1016/j.enconman.2010.06.074
    Search in Google Scholar
  16. 16. A. Parlak, H. Yasar, C. Hasimoglu, A. Kolip: The effects of injection timing on NOx emissions of a low heat rejection indirect diesel injection engine. Applied Thermal Engineering 25 , 2005, pp. 3042-3052.10.1016/j.applthermaleng.2005.03.012
    Search in Google Scholar
  17. 17. R. Payri, F.J. Salvador, J. Gimeno, L.D. Zapata: Diesel nozzle geometry influence on spray liquid-phase fuel penetration in evaporative conditions. Fuel 87 , 2008, pp. 1165-1176.10.1016/j.fuel.2007.05.058
    Search in Google Scholar
  18. 18. M. Ebna Alam Fahd, Yang Wenming, P.S. Lee, S.K. Chou, Christopher R. Yap: Experimental investigation of the performance and emission characteristics of direct injection diesel engine by water emulsion diesel under varying engine load condition. Applied Energy 102 , 2013, pp. 1042-1049.10.1016/j.apenergy.2012.06.041
    Search in Google Scholar
  19. 19. W.M. Yang, H. An, S.K. Chou, S. Vedharaji, R. Vallinagam, M. Balaji, F.E.A. Mohammad, K.J.E. Chua: Emulsion fuel with novel nano-organic additives for diesel engine application. Fuel 104 ,2013, pp. 726-731.10.1016/j.fuel.2012.04.051
    Search in Google Scholar
  20. 20. A. Kumar Agarwal, A. Dhar: Experimental investigations of performance, emission and combustion characteristics of Karanja oil blends fuelled DICI engine. Renewable Energy 52 , 2013, pp. 283 - 291.10.1016/j.renene.2012.10.015
    Search in Google Scholar
  21. 21. A.K. Hossain, M. Ouadi, S.U. Siddiqui, Y. Yang, J. Brammer, A. Hornung, M. Kay, P.A. Davies: Experimental investigation of performance, emission and combustion characteristics of an indirect injection multi-cylinder CI engine fuelled by blends of de-inking sludge pyrolysis oil with biodiesel. Fuel 105, 2013, pp. 135-142.10.1016/j.fuel.2012.05.007
    Search in Google Scholar
  22. 22. D.C. Rakopoulos : Combustion and emissions of cottonseed oil and its bio-diesel in blends with either n-butanol or diethyl ether in HSDI diesel engine. Fuel 105, 2013, pp. 603-613.10.1016/j.fuel.2012.08.023
    Search in Google Scholar
  23. 23. S. Saravanan, G. Nagarajan, S. Sampath : Combined effect of injection timing, EGR and injection pressure in NOx control of a stationary diesel engine fuelled with crude rice bran oil methyl ester. Fuel 104 , 2013, pp. 409-416.10.1016/j.fuel.2012.10.038
    Search in Google Scholar
  24. 24. P. Behera, S. Murugan: Combustion, performance and emission parameters of used transformer oil and its diesel blends in a DI diesel engine. Fuel 104 , 2013, pp. 147-154.10.1016/j.fuel.2012.09.077
    Search in Google Scholar
  25. 25. B. İşcan, H. Aydın : Improving the usability of vegetable oils as a fuel in a low heat rejection diesel engine. Fuel Processing Technology 98 , 2012, pp. 59-64.10.1016/j.fuproc.2012.02.001
    Search in Google Scholar
  26. 26. S. Altun, H. Bulut, C. Oner: The comparison of engine performance and exhaust emission characteristics of sesame oil-diesel fuel mixture with diesel fuel in a direct injection diesel engine. Renewable Energy 33 , 2008, pp. 1791-1795.10.1016/j.renene.2007.11.008
    Search in Google Scholar
  27. 27. Ch. Yao, C.S. Cheung, Ch. Cheng, Y. Wang, T.L. Chan, S.C. Lee: Effect of Diesel/methanol compound combustion on Diesel engine combustion and emissions. Energy Conversion and Management 49, 2008, pp. 1696-1704. 10.1016/j.enconman.2007.11.007
    Search in Google Scholar
  28. 28. H. Aydin, C. Ilkılıç : Effect of ethanol blending with biodiesel on engine performance and exhaust emissions in a CI engine. Applied Thermal Engineering 30 , 2010, pp. 1199-1204.10.1016/j.applthermaleng.2010.01.037
    Search in Google Scholar
  29. 29. J. Huang, Y. Wang, J. Qin, A. P. Roskilly: Comparative study of performance and emissions of a diesel engine using Chinese pistache and jatropha biodiesel. Fuel Processing Technology 91 ,2010, pp. 1761-1767.10.1016/j.fuproc.2010.07.017
    Search in Google Scholar
  30. 30. Y.D. Wang, T. Al-Shemmeri, P. Eames, J. McMullan, N. Hewitt, Y. Huang, S. Rezvani: An experimental investigation of the performance and gaseous exhaust emissions of a diesel engine using blends of a vegetable oil. Applied Thermal Engineering 26, 2006, pp. 1684-1691.10.1016/j.applthermaleng.2005.11.013
    Search in Google Scholar
  31. 31. International Organization of Standardization : ISO 8178 regulation.
    Search in Google Scholar
DOI: https://doi.org/10.1515/pomr-2015-0061 | Journal eISSN: 2083-7429 | Journal ISSN: 1233-2585
Journal RSS Feed
Language: English
Page range: 90 - 98
Published on: Oct 15, 2015
Published by: Gdansk University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
marine diesel engine,
exhaust gas composition,
emission,
exhaust gas valve leakage,
inlet valve leakage
Related subjects:
Engineering,
Introductions and overviews,
Engineering, other,
Geosciences,
Atmospheric science and climatology,
Life sciences,
Life sciences, other

© 2015 Jerzy Kowalski, published by Gdansk University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Previous articleVolume 22 (2015): Issue 3 (September 2015)Next article