Change in dust collection efficiency of liquid collectors in conditions of dedusting liquid recirculation

Krawczyk, Janusz

doi:10.1515/pjct-2017-0060

Abstract

The high efficiency of industrial wet scrubbers is the result of a simultaneous formation of dust particle collectors. Collectors can be understood as droplets of atomised liquid, bubbles formed in the conditions of intensive barbotage, liquid surface and wet surfaces. All collectors are formed during the operation of a circulating unit. The efficiency of dust collection process also depends on the ability of dust particles to be absorbed by collectors. The study provides an experimental analysis of the effect of the increasing concentration of a dust collection liquid in the conditions of full liquid recirculation on the efficiency of dust collection process in the examined types of collectors.

References

1. Łopata, S. & Ocłoń, P. (2012). Modelling and optimizing operating conditions of heat exchanger with finned elliptical tubes. In L. Hector Juarez (Ed.), Fluid dynamics, computational modeling and applications (pp. 327–356). Rijeka, Croatia: InTech.
Search in Google Scholar Back to article
2. Ocłoń, P., Łopata, St., Nowak, M. & Benim, A. (2014). Numerical study on the effect of inner tube fouling on the thermal performance of high-temperature fin-and-tube heat exchanger. Prog. Comput. Fluid Dyn. 15(5), 290. DOI: 10.1504/PCFD.2015.072014.10.1504/PCFD.2015.072014
Open DOI Search in Google Scholar Back to article
3. Brauer, H., Dyląg, M. & Talaga, J. (1989). Zur fluiddynamik von gerührten gas/feststoff/fltssigkeits-systemen. Chem. Ing. Tech. 61, 978–979 (in German).10.1002/cite.330611218
Open DOI Search in Google Scholar Back to article
4. Brauer, H., Dyląg, M. & Talaga, J. (1996). Modellvorstellung zur entstehung der vollständigen suspension im rühbehälter. Forsch. Ingenieurwes 62, 239–245 (in German).
Search in Google Scholar Back to article
5. Dyląg, M. & Talaga, J. (1995). Modeling of multiphase flows. Chem. Process Eng. 16(3), 407–420.
Search in Google Scholar Back to article
6. Kabsch, M. (1976). Methods of dust wettability measurements. Wrocław, Poland: Wroclaw University of Technology Publisher (in Polish).
Search in Google Scholar Back to article
7. Nazarow, G., Krawczyk J., Blinicziew, W., Czagin, O. (2000). Influence of the design of the dust collecting apparatus on the limiting concentration of the irrigating suspension. Himia Himic. Tehnol. 43(2), 80–85 (in Russian).
Search in Google Scholar Back to article
8. Krawczyk, J. (2015). Development of wet methods of industrial gasses dedustind on the basis of experimental investigations. Cracow, Poland: Cacow University of Technology Publisher (in Polish).
Search in Google Scholar Back to article
9. Krawczyk J., Dyląg, M. & Rosiński, J. (1998). Vermin-derung des wasserverbrauchs bei der entstaubung. Gefahrst. Reinhalt. L. 59(1), 45–49.
Search in Google Scholar Back to article
10. Byeon, S.H., Lee, B.K. & Mohan, B.R. (2012). Removal of ammonia and particulate matter using a modified turbulent wet scrubbing system. Sep. Purif. Technol. 98, 221–229. DOI: 10.1016/j.seppur.2012.07.014.10.1016/j.seppur.2012.07.014
Search in Google Scholar Back to article
11. Mohan, Jain, R. & Meikap, B. (2008). Comprehensive analysis for prediction of dust removal efficiency using twin-fluid atomization in a spray scrubber. Sep. Purif. Technol. 63 (2), 269–277. DOI: 10.1016/j.seppur.2008.05.006.10.1016/j.seppur.2008.05.006
Open DOI Search in Google Scholar Back to article
12. Kim, H., Jung, C., Oh, S. & Lee K. (2001). Particle removal efficiency of gravitational wet scrubber considering diffusion, interception and impaction. Environ. Eng. Sci. 18 (2), 125–136. DOI: 10.1089/10928750151132357.10.1089/10928750151132357
Open DOI Search in Google Scholar Back to article
13. Lim, K., Lee, S. & Park, H. (2006). Prediction for particle removal efficiency of a reverse jet scrubber. J. Aerosol. Sci. 37 (12), 1826–1839. DOI: 10.1016/j.jaerosci.2006.06.010.10.1016/j.jaerosci.2006.06.010
Open DOI Search in Google Scholar Back to article
14. Mohan, B., Biswas, S. & Meikap, B. (2008). Performance characteristics of the particulates scrubbing in a counter-current spray-column. Sep. Purif. Technol. 61(1), 96–102. DOI: 10.1016/j.seppur.2007.09.018.10.1016/j.seppur.2007.09.018
Open DOI Search in Google Scholar Back to article
15. Meikap, B. & Biswas, M. (2004). Fly-ash removal efficiency in a modified multi-stage bubble column scrubber. Sep. Purif. Technol. 36(3), 177–190. DOI: 10.1016/S1383-5866(03)00213-2.10.1016/S1383-5866(03)00213-2
Open DOI Search in Google Scholar Back to article
16. Ebert, F. & Büttner, H. (1996). Recent investigations with nozzle scrubbers. Powder Technol. 86(1), 31–36. DOI: 10.1016/0032-5910(95)03034-4.10.1016/0032-5910(95)03034-4
Open DOI Search in Google Scholar Back to article
17. Gemci, T. & Ebert, F. (1992). Prediction of the particle capture efficiency based on the combined mechanisms (turbulent diffusion, inertial impaction, interception, and gravitation) by a 3-D simulation of a wet scrubber. J. Aerosol. Sci. 23, 769–772. DOI: 10.1016/0021-8502(92)90525-Z.10.1016/0021-8502(92)90525-Z
Open DOI Search in Google Scholar Back to article
18. Park, S., Jung, C., Jung, K., Lee, B. & Lee, K. (2005). Wet scrubbing of polydisperse aerosols by freely falling droplets. J. Aerosol. Sci. 36, 1444–1458. DOI: 10.1016/j.jaerosci.2005.03.012.10.1016/j.jaerosci.2005.03.012
Open DOI Search in Google Scholar Back to article
19. Wang, Q., Chen, X. & Gong, X. (2013). The particle removing characteristics in a fixed valve tray column. Ind. Eng. Chem. Res. 52(9), 3441–3452. DOI: 10.1021/ie3027422.10.1021/ie3027422
Open DOI Search in Google Scholar Back to article
20. Krawczyk, J. (1996). Wet dedusting, heat and mass exchange in apparatuses of intense performance. Moscow, Russia: Russian National Academy Publisher.
Search in Google Scholar Back to article
21. Talaga, J., Brauer, H. & Dyląg, M. (1996). Modellvorstellung zur entstehung der vollständigen suspension im rühbehälter. Forsch. Ingenieurwes 62(9), 239–246. DOI: 10.1007/BF02601430.10.1007/BF02601430
Open DOI Search in Google Scholar Back to article
22. Löffler, F. (1988). Staubabscheiden. New York, USA: Georg Thieme Verlag.
Search in Google Scholar Back to article
23. Krawczyk, J., Czagin, O. & Postnikowa, I. (2010). The change of fractional dedusting efficiency with increase of liquid concentration for different wettability dusts. In proceedings of IX International Conference “Theoretical Basics of Energy and Resource-saving Processes, Equipment and Environmentally Safe Industries”, 28–30 September 2010 (pp. 121–128). Ivanovo, Russia: Ivanovo Stte University of Chemistry and Technology Publisher (in Polish).
Search in Google Scholar Back to article
24. Krawczyk, J. & Pikoń, J. (1986). Abscheider mit zellen-ftllkorpern. Staub. Reinhalt. Luft 1, 22–25 (in German).
Search in Google Scholar Back to article
25. Dłuska, E., Hubacz, R., Wroński, S., Kamieński, J., Dyląg, M. & Wójtowicz, R. (2007). The influence of helical flow on water fuel emulsion preparation. Chem. Eng. Commun. 194 (10), 1271–1286. DOI: 10.1080/00986440701293959.10.1080/00986440701293959
Search in Google Scholar Back to article
26. Krawczyk, J., Roszak, Z. & Wisła H. (2006) Dedusting in bubbling and drop zones of periodic apparatus. Chem. Enginee. Equip. 45(37), 99–101 (in Polish).
Search in Google Scholar Back to article
27. Wisła, H. (2009). Wet dedusting for full liquid recirculation. Doctoral dissertation, Cracow University of Technology, Cracow, Poland (in Polish).
Search in Google Scholar Back to article
28. Krawczyk, J., Maszek, L., Mieszkowski, A. & Roszak, Z. (2008). Wet dust extraction in the condition of total liquid recirculation. Czasopismo Techniczne – Technical Transactions 2-M/2008 (2), 143–154 (in Polish).
Search in Google Scholar Back to article
29. Krawczyk, J., Czagin, O. & Postnikowa, I. (2012). Changes in the dust capture during the impact aerosol of the liquid surface. Czasopismo Techniczne – Technical Transactions 2-M/2012 (6), 207–214 (in Polish).
Search in Google Scholar Back to article
30. Szatko, W., Blinicziew, W. & Krawczyk, J. (2011). Comparison of mathematical models describing changes of the suspension absorption capacity and thermal resistance of the sludge. In G. Wozny & Ł. Hady (Eds.), Process Engineering and Chemical Plant Design 2011, (pp. 103–113). Berlin: Universitätsverlag der TU Berlin.
Search in Google Scholar Back to article
31. Wójtowicz, R., Lipin, A.A. & Talaga, J. (2014). On the possibility of using of different turbulence models for modeling flow hydrodynamics and power consumption in mixing vessels with turbine impellers. Theor. Found. Chem. Eng. 48 (4), 360–375. DOI: 10.1134/S0040579514020146.10.1134/S0040579514020146
Open DOI Search in Google Scholar Back to article
32. Kamieński, J. & Wójtowicz, R. (2001). Drop size during dispersion of two immiscible liquids in a vibromixer. Chem. Process Eng. 22(3C), 597–602 (in Polish).
Search in Google Scholar Back to article
33. Wójtowicz, R. (2014). Choice of an optimal agitated vessel for the drawdown of floating solids. Ind. Eng. Chem. Res. 53 (36), 13989–14001. DOI: 10.1021/ie500604q, 53 13989–14001.10.1021/ie500604q,531398914001
Open DOI Search in Google Scholar Back to article

Change in dust collection efficiency of liquid collectors in conditions of dedusting liquid recirculation

Abstract

Paradigm

My account