References
- 1. Chaboche J., Dang Van K., Cordier G. (1979), Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel, Structural mechanics in reactor technology. Transactions, Vol. L, 1-10.
- 2. Chaboche J.-L., Kanouté P. & Azzouz F. (2012), Cyclic inelastic constitutive equations and their impact on the fatigue life predictions, International Journal of Plasticity, 35, 44–66.
- 3. Crossland B. (1982), Explosive welding of metals and its application, Clarendon Press, Oxford.
- 4. Findik F. (2011), Recent developments in explosive welding, Materials & Design, 32 (3), 1081–1093.
- 5. Ganczarski A., Szubartowski D. (2015), On The Stress Free Deformation Of Linear FGM Interface Under Constant Temperature, Acta Mechanica et Automatica, 9(3), 135-139.
- 6. Gloc M., Wachowski M., Plocinski T., Kurzydlowski K.J. (2016), Microstructural and microanalysis investigations of bond titanium grade1/low alloy steel st52-3N obtained by explosive welding, Journal of Alloys and Compounds, 671, 446–451.
- 7. Gómez C., Canales M., Calvo S., Rivera R., Valdés J.R., Núñez, J.L. (2011), High and low cycle fatigue life estimation of welding steel under constant amplitude loading: Analysis of different multiaxial damage models and in-phase and out-of-phase loading effects, International Journal of Fatigue, 33 (4), 578–587.
- 8. Hubel H. (1996), Basic conditions for material and structural ratcheting, Nuclear Engineering and Design, 162(1), 55–65.
- 9. Karolczuk A., Kowalski M. (2014), Fatigue phenomena in steel-titanium bimetallic composite (in Polish), Politechnika Opolska, Opole, Poland.
- 10. Karolczuk A., Kowalski M., Bański R., Żok F. (2013), Fatigue phenomena in explosively welded steel–titanium clad components subjected to push–pull loading, International Journal of Fatigue, 48, 101–108.
- 11. Karolczuk A., Kowalski M., Kluger K., Żok F. (2014), Identification of Residual Stress Phenomena Based on the Hole Drilling Method in Explosively Welded Steel-Titanium Composite, Archives of Metallurgy and Materials, 59 (3), 1129-1133.
- 12. Lazurenko D.V., Bataev I.A., Mali V.I., Bataev A.A., Maliutina I.N., Lozhkin V.S., Esikov M.A., Jorge A.M.J. (2016), Explosively welded multilayer Ti-Al composites: Structure and transformation during heat treatment, Materials and Design, 102, 122–130.
- 13. Paul H., Faryna M., Prażmowski M., Bański R. (2011), Changes in the bonding zone of explosively welded sheets, Archives of Metallurgy and Materials, 56 (2), 463–474.
- 14. Paul H., Lityńska-Dobrzyńska L., Miszczyk M., Prażmowski M. (2012), Microstructure and Phase Transformations Near the Bonding Zone of Al/Cu Clad Manufactured by Explosive Welding, Archives of Metallurgy and Materials, 57 (4), 1151-1162.
- 15. Song J., Kostka A., Veehmayer M., Raabe D. (2011), Hierarchical microstructure of explosive joints: Example of titanium to steel cladding, Materials Science and Engineering: A, 528 (6), 2641–2647.
- 16. Sulym H., Pasternak I., Tomashivskyy M. (2016), Boundary Integral Equations for an Anisotropic Bimaterial with Thermally Imperfect Interface and Internal Inhomogeneities, Acta Mechanica et Automatica, 10 (1), 66-74.
- 17. Walczak Z. (1989), Explosive welding (in Polish), WNT.