Analysis of Plastic Deformation of Double Reduced Sheets

Emil Spišák; Janka Majerníková; Emília Duľová Spišáková; Ľuboš Kaščák

doi:10.1515/ama-2016-0041

.blurhash-client-img { display: none !important; }

Analysis of Plastic Deformation of Double Reduced Sheets

Acta Mechanica et Automatica

Volume 10 (2016): Issue 4 (December 2016)

By: Emil Spišák, Janka Majerníková, Emília Duľová Spišáková and Ľuboš Kaščák

Open Access

|Dec 2016

Abstract

This paper discusses the causes and the effects of plastic deformation of double reduced sheets under uniaxial and biaxial loading. It focuses on the specific inhomogeneity and localization of plastic deformation, which is analysed in detail. The uniaxial and the hydraulic biaxial tensile tests were used for material testing and the results were compared and evaluated. The final part of the paper deals with the microstructure of material deformations.

References

1. Aerts T., Dimogerontakis Th., DeGraeve I., Fransaer J., Terryn H. (2007), nfluence of the anodizing temperature on the porosity and the mechanical properties of the porous anodic oxide film, Surface and Coatings Technology, 201(16-17), 7310–7317.10.1016/j.surfcoat.2007.01.044
Search in Google Scholar Back to article
2. European Standard EN 10202:2001 (2001) Cold reduced tin mill products-electrolytic tinplate and electrolytic chromium/Cr oxide coated steel, The European Standard Publications, Brussels.
Search in Google Scholar Back to article
3. Gburík R., Černík M., Legatt R., Vranec P. (2015), Crystallographic texture of light tinplate coatings made in various electrolytes, IOP Conference Series: Materials Science and Engineering, 82(1), 4.10.1088/1757-899X/82/1/012062
Search in Google Scholar Back to article
4. Hill R. (1952), On discontinuous plastic states with special reference to localized necking in thin sheets, Journal of the Mechanics and Physics of Solids, 1, 19-30.10.1016/0022-5096(52)90003-3
Search in Google Scholar Back to article
5. Kvačkaj T., Bacsó J., Bidulská J., Lupták M., Pokorný I., Kvačkaj M., Vlado, M. (2010), Influence of cryo and classic rolling conditions on processing parameters of C-Si steel, Acta Metallurgica Slovaca, 16(4), 268-276
Search in Google Scholar Back to article
6. Kvačkaj T., Bidulská J. (2014), From micro to nano scale structure by plastic deformations, Materials Science Forum, 783-786, 842-847.10.4028/www.scientific.net/MSF.783-786.842
Search in Google Scholar Back to article
7. Makarov P.V., Schmauder S., Cherepanov O.I., Smolin I.Yu., Romanova V.A., Balokhonov R.R., Saraev D.Yu., Soppa E., Kizler P., Fischer G., Hu S., Ludwig M. (2004), Simulation of elastic–plastic deformation and fracture of materials at micro-, meso- and macrolevels, Theoretical and Applied Fracture Mechanics, 37(1-3), 183-244.10.1016/S0167-8442(01)00078-7
Search in Google Scholar Back to article
8. Makarov P.V., Schmauder S., Cherapanov I.O., Smolin Yu.I., Romanova A.V., Balokhonov R.R., Saraev D.Yu., Soppa E., Kizler P., Fischer G., Hu S., Ludwig M. (2001), Simulation of elastic-plastic deformation and fracture of materials at micro, meso- and macrolevels, Theoretical and Applied Fracture Mechanics, 37, 183-244.10.1016/S0167-8442(01)00078-7
Search in Google Scholar Back to article
9. Marciniak Z. (1978), Mechanics of sheet metal forming, Plenum Press, New York.10.1007/978-1-4613-2880-3_9
Search in Google Scholar Back to article
10. Mihaliková M., Ambriško L., Pešek L. (2011), Videoextensometric measuring of deformation processes in automotive steel sheets at two strain rate levels, Kovové materiály, 49(2), 137-141.10.4149/km_2011_2_137
Search in Google Scholar Back to article
11. Slota J., Spišák E., Jurčišin M. (2014), Local strain hardening and non-uniformity of plastic strain of tinplate, Key Engineering Materials, 606, 23-26.10.4028/www.scientific.net/KEM.606.23
Search in Google Scholar Back to article
12. Spišák E., Majerníková J. (2014), The Loss of Plastic Properties Stability of Thin Tinplates and Its Influence on Change of Corrosive Resistance, Applied Mechanics and Materials: Novel Trends in Production Devices and Systems 2, 693, 340-345.10.4028/www.scientific.net/AMM.693.340
Search in Google Scholar Back to article
13. Spišák E., Džupon M., Majerníková J., Spišáková Duľová E. (2015), Failure of coatings of tinplates, Acta Metallurgica Slovaca, 21(3),213-21910.12776/ams.v21i3.590
Search in Google Scholar Back to article
14. Spišák E., Majerníková J. (2014a), The Loss of Plastic Properties Stability of Thin Tinplates and Its Influence on Change of Corrosive Resistance, Applied Mechanics and Materials, 693, 340-345.10.4028/www.scientific.net/AMM.693.340
Search in Google Scholar Back to article
15. Spišák E., Slota J., Majerníková J. (2011), The analysis of plastic strain of single and double reduced tinplates, Chem. Lett., 105, 485-487.
Search in Google Scholar Back to article
16. Spišák E., Slota J., Majerníková J., Kaščák Ľ., Malega P. (2012), Inhomogeneous plastic deformation of tinplates under uniaxial stress state, Chem. Lett., 106, 537-540.
Search in Google Scholar Back to article
17. Spišák E., Majerníková J. (2012), Analysis of variance of mechanical properties of sheets as the input parameters for simulation of processes, Acta Metallurgica Slovaca, 18(2-3), 109-116.
Search in Google Scholar Back to article
18. Spišák E., Majerníková J. (2014b), The Loss of Plasticity Stability, Applied Mechanics and Materials: Novel Trends in Production Devices and Systems 2, 693, 346-351.10.4028/www.scientific.net/AMM.693.346
Search in Google Scholar Back to article
19. Swift H.W. (1952), Plastic instability under plane stress, Journal of the Mechanics and Physics of Solids, 1(1), 1-18.10.1016/0022-5096(52)90002-1
Search in Google Scholar Back to article
20. Yu H., Burgess I.W., Davison J.B., Plank R.J. (2008), Journal of Constructional Steel Research, 64(5), 515-525.10.1016/j.jcsr.2007.10.009
Search in Google Scholar Back to article
21. Zhang J., Jiang Y. (2004a), A study of inhomogeneous plastic deformation of 1045 steel, J. Eng. Mater. Technol., 126, 164-172.10.1115/1.1647125
Search in Google Scholar Back to article
22. Zhang J., Jiang Y. (2004b), Lüders bands propagation of 1045 steel under multiaxial stress state, International Journal of Plasticity, 21, 651-670.10.1016/j.ijplas.2004.05.001
Search in Google Scholar Back to article
23. Zhang J., Jiang Y.A. (2005), International Journal of Plasticity, 21(3), 651-670.10.1016/j.ijplas.2004.05.001
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.1515/ama-2016-0041 | Journal eISSN: 2300-5319 | Journal ISSN: 1898-4088

Journal RSS Feed

Language: English

Page range: 271 - 274

Submitted on: Nov 12, 2015

Accepted on: Nov 28, 2016

Published on: Dec 28, 2016

Published by: Bialystok University of Technology

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

Related subjects:

Electrical engineering,

Electronics,

Mechanical engineering,

Mechanics,

Bioengineering and biomedical engineering,

Biomechanics,

Civil engineering,

Environmental engineering

© 2016 Emil Spišák, Janka Majerníková, Emília Duľová Spišáková, Ľuboš Kaščák, published by Bialystok University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 10 (2016): Issue 4 (December 2016)