References
- 1. Nürnberger F., Grydin O., Yu Z., Schaper M., Microstructural Behavior of Tempering Steels during Precision Forging and Quenching from Hot-forming Temperatures. Metallurgical and Mining Industry 3 (2011) 79-86.
- 2. El-Bitar T., Fouad N., Zaky A. I., El-Rady S.A., Effect of cooling rate after controlled forging on properties of low carbon multi-microalloyed steels. Materials Science and Engineering A 534 (2012) 514- 520.
- 3. Zhuang L., Di W., Influence of Hot Deformation and Subsequent Austempering on the Mechanical Properties of Hot Rolled Multiphase Steel, J. Mater. Sci. Technol. 22 (2006) 763-768.
- 4. Radwañski G., Microstructural Comparison of the Thermomechanically Treated and Cold Deformed Nb-Microalloyed Trip Steel, Materials and Technology 48 (2014) 679-683.
- 5. Lourençoa N.J., Jorge Jr.a A.M., Rollob J.M.A., Balancina O., Plastic Behavior of Medium Carbon Vanadium Microalloyed Steel at Temperatures Near γ⇔α Transformation, Materials Research 4 (2001) 149-156.
- 6. Mazaheri Y., Kermanpur A., Najafizadeh A., Saeidi N., Effects of initial microstructure and thermo mechanical processing parameters on microstructures and mechanical properties of ultrafine grained dual phase steels, Materials Science & Engineering A 61 (2014) 254-262.
- 7. Long X.Y., Kang J., Lvb B., Zhang F.C., Carbide-free bainite in medium carbon steel, Materials and Design, Materials and Design 64 (2014) 237-245.
- 8. Sharma S., Sangal S., Mondal K., Development of New High-Strength Carbide-Free Bainitic Steels, Metallurgical and Materials Transactions A 42A (2011) 3916-3921.
- 9. Lan H.F., Du L.X., Misra R.D.K., Effect of Microstructural Constituents on Strength-Toughness Combination in a Low Carbon Bainitic Steel, Materials Science & Engineering A 611 (2014) 194-200.
- 10. Sandvik B.P.J, Nevalainen H.P, Structure-property relationships in commercial low-alloy bainiticaustenitic steel with high strength, ductility, and toughness, Material Science and Technology 8 (1981) 213-220.
- 11. Garcia-Mateo C., Caballero F.G., Bhadeshia H.K.D.H., Development of hard bainite, ISIJ International 43 (2003) 1238-1243.
- 12. Caballero F.G., Bhadeshia H.K.D.H., Very strong bainite. Solid State Material Science 8 (2004) 251-257.
- 13. Caballero F.G., Bhadeshia H.K.D.H., Mawella K.J.A., Jones D.G., Brown P., Very strong low temperature bainite. Material Science and Technology 18 (2002) 279-284.
- 14. Garcia-Mateo C., Caballero F.G., Bhadeshia H.K.D.H., Acceleration of low temperature bainite, ISIJ International 43 (2003) 1821-1825.
- 15. Hase K., Garcia-Mateo C., Bhadeshia H.K.D.H., Bimodal size-distribution of bainite plates. Material Science & Engineering A 438 (2006) 145-148.
- 16. Wang T.S., Li X.Y., Zhang F.C., Zheng Y.Z., Microstructures and mechanical properties of 60Si2CrVA steel by isothermal transformation at low temperature. Material Science & Engineering A 440 (2006) 1124-1127.
- 17. Yang J., Wang T.S., Zhang B., Zhang F.C., Microstructure and mechanical properties of high-carbon Si-Al-rich steel by low-temperature austempering. Material & Design 35 (2012) 170-184.
- 18. Soliman M., Palkowski H., Ultra-fine bainite structure in hypo-eutectoid steels, ISIJ International 47 (2007) 1703-1710.
- 19. Huang H., Sherif M.Y., Rivera-Díaz-del-Castillo P.E.J., Combinatorial optimization of carbide-free bainitic nanostructures, Acta Metallurgical 61 (2013) 1639-1647.
- 20. Masoud I. M., Farahat A.I.Z., AL-Jarrah J. A., Abu Mansour T., Thermo-Mechanical Processing of Carbide Free Steels, International Journal of Mechanical Engineering (IJME), 3 (2014) 37-44.