Review of Solutions Used in High-Speed Induction Motor Drives Operating in Household Appliances

Dariusz Sobczyński

doi:10.5277/ped160102

.blurhash-client-img { display: none !important; }

Review of Solutions Used in High-Speed Induction Motor Drives Operating in Household Appliances

Power Electronics and Drives

Volume 1 (2016): Issue 1 (June 2016)

By: Dariusz Sobczyński

Open Access

|Oct 2017

Abstract

The paper presents a high-speed induction motor drive as an alternative for household appliances. A short comparison was made between standard and high-speed motors. The solutions that use three-phase induction motors were taken into consideration with different types of rotors: solid or squirrel-cage. The assumed power of drive was up to 1 kW. As the power source, a single-phase voltage source has been adopted, which was indirectly converted to a three-phase output voltages with the fundamental frequency up to 667 Hz.

References

[1] BINKOWSKI T., Universal High Speed Induction Motor Drives, Analysis and Simulation of Electrical and Computer Systems, Springer International Publishing, 2015, 149-162.10.1007/978-3-319-11248-0_12
Search in Google Scholar Back to article
[2] BINKOWSKI T. et al., A drive system with high-speed single-phase supplied three-phase induction motor, 13th Int. Power Electronics and Motion Control Conference, EPE-PEMC, 2008, 729-732.10.1109/EPEPEMC.2008.4635349
Search in Google Scholar Back to article
[3] BOGLIETTI A. et al., About the design of very high frequency induction motors for spindle applications, Conf. Rec. IEEE-IAS Annual Meeting, October, 1992, Vol. 1, 25-32.
Search in Google Scholar Back to article
[4] BRONDUM D. et al., High-speed, direct-drive centrifugal compressors for commercial HVAC systems, Proc. of the Int. Compressor Engineering Conf., Purdue Univ., West Lafayette, 1998, 921-926.
Search in Google Scholar Back to article
[5] BUCZEK K., SOBCZYŃSKI D., Analysis of Induction Motor and 330 Hz Inverter Drive System, 13th Int. Conf. on Electrical Drives and Power Electronics, EDPE’99, 1999, 64-68.
Search in Google Scholar Back to article
[6] BUCZEK K., SOBCZYŃSKI D., Analysis and examination of high-speed induction motor drive system, Power Electronics and Electrical Drives. Polish Academy of Sciences, Electrical Engineering Committee, 2007, 487-498.
Search in Google Scholar Back to article
[7] DU Z., OZPINECI B., TOLBERT L., CHIASSON J., DC-AC Cascaded H-bridge multi-level boost inverter with no inductors for electric/hybrid electric vehicle applications, IEEE Trans. Ind. Appl, Vol. 45, No. 3, 2009, 963-970.10.1109/TIA.2009.2018978
Search in Google Scholar Back to article
[8] KRYKOWSKI K. at al., Computer analysis of high-speed PM BLDC motor properties, COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 2011, Vol. 30, No. 3, 941-956.10.1108/03321641111110906
Search in Google Scholar Back to article
[9] LÄHTEENMÄKI J., Design and voltage supply of high-speed induction machines, Acta Polytecnica Scandinavica, Electrical Engineering Series, No. 108, Diss. HUT, Espoo, 2002.
Search in Google Scholar Back to article
[10] MEKHICHE M. et al., High speed motor drive development for industrial applications, Int. Electric Machines Drives Conf., Seattle, WA, 1999, 244-248.
Search in Google Scholar Back to article
[11] POPESCU M., Induction motor modelling for vector control purposes, Helsinki University of Technology Department of Electrical and Communications Engineering Laboratory of Electromechanics Espoo’2000, Report 63, 2000.
Search in Google Scholar Back to article
[12] RAHMAN M. et al., Super high speed electrical machines - summary, IEEE Power Engineering Society General Meeting, 2004, Vol. 2, 1272-1275.
Search in Google Scholar Back to article
[13] RAO J., LI Y., High-performance control strategies and applications of a new hybrid cascaded multilevel inverter, IEEE Ind. Appl. Soc. Ann. Meet., 2008, 1-5.10.1109/08IAS.2008.307
Search in Google Scholar Back to article
[14] SOMASEKHAR V., GOPAKUMAR K., PITTET A., RANGANATHAN V., PWM inverter switching strategy for a dual two-level inverter fed open-end winding induction motor drive with a switched neutral, IEE Proc. Electr. Power Appl., 2002, Vol. 149, No. 2, 152-159.10.1049/ip-epa:20020127
Search in Google Scholar Back to article
[15] SOONG W., KLIMAN G., JOHNSON R., WHITE R., MILLER J., Novel High-Speed Induction Motor for a Commercial Centrifugal Compressor, IEEE Trans. Industry Applications, 2000, Vol. 36, No. 3, 706-713.10.1109/28.845043
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.5277/ped160102 | Journal eISSN: 2543-4292 | Journal ISSN: 2451-0262

Journal RSS Feed

Language: English

Page range: 27 - 39

Submitted on: Jun 24, 2016

Published on: Oct 27, 2017

Published by: Wroclaw University of Science and Technology

In partnership with: Paradigm Publishing Services

Publication frequency: 1 issue per year

Keywords:

high speed induction motor drives,

household appliance drives,

power electronic converters

Related subjects:

Computer sciences,

Artificial intelligence,

Engineering,

Electrical engineering,

Electronics

© 2017 Dariusz Sobczyński, published by Wroclaw University of Science and Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 1 (2016): Issue 1 (June 2016)