Industrial Drive Systems. Current State and Development Trends

Orłowska-Kowalska, Teresa; Dybkowski, Mateusz

doi:10.5277/ped160101

Abstract

The article presents the current state and development trends of electrical drives, with particular emphasis on modern control structures and safety systems of various types of electrical machines. Special attention was paid to the needs of industrial drive systems and a possibility of practical implementation of complex control algorithms. Development perspectives of electrical drives are discussed from the perspective of new trends in control, power electronics and electrical machines, with consideration given to systems robust to faults of drive system elements.

References

[1] ORŁOWSKA-KOWALSKA T., State of the Art and Future Development of Electrical Drives, Przegląd Elektrotechniczny, 2004, Vol. 80, No 3, 185-190, (in Polish).
Search in Google Scholar Back to article
[2] FINCH J.W., GIAOURIS D., Controlled AC Electrical Drives, IEEE Trans. Industrial Electronics, Vol. 55, No. 2, 481-491, 2008.10.1109/TIE.2007.911209
Open DOI Search in Google Scholar Back to article
[3] HERMANN, PENTEK, OTTO, Design Principles for Industrie 4.0 Scenarios, 2015.10.1109/HICSS.2016.488
Search in Google Scholar Back to article
[4] CIENIAK I., Polish market of electric drives and servodrives, Control Engineering Polska, 2011, (in Polish).
Search in Google Scholar Back to article
[5] SCHWAB K., The Fourth Industrial Revolution, 2016.
Search in Google Scholar Back to article
[6] ORŁOWSKA-KOWALSKA T., Sensorless induction motor drives, Oficyna Wydawnicza Politechniki Wrocławskiej, Wrocław 2003, (in Polish).
Search in Google Scholar Back to article
[7] DYBKOWSKI M., Estimation of Speed in a Vector Controlled Induction Motor Drive - Selected Problems, Scientific Papers of the Institute of Electrical Machines, Drives and Measurements of the Wroclaw University of Technology, ser. Monographs, Vol. 20, Wrocław 2013, (in Polish).
Search in Google Scholar Back to article
[8] KAZMIERKOWSKI M.P., BLAABJERG F., KRISHNAN R., Control in Power Electronic - Selected Problems, Academic Press, USA, 2002.
Search in Google Scholar Back to article
[9] BLASCHKE F., The principle of field orientation as applied to the new TRANSVECTOR closed-loop control system for rotating field machines, Siemens Review, 1972, No. 34, 217-220.
Search in Google Scholar Back to article
[10] HASSE K., Drehzahlgelverfahren fur schnelle Umkehrantriebe mit stromrichtergespeisten Asynchron-Kurzchluss-laufer-motoren, Reglungstechnik, 1972, No. 20, 60-66.10.1524/auto.1972.20.112.60
Search in Google Scholar Back to article
[11] TAKAHASHI I., NOGUCHI T., A new quick response and high efficiency control strategy of an induction motor, IEEE Trans. Industry Applications, Sept/Oct 1986, Vol. IA-22, No. 5, 820-827.10.1109/TIA.1986.4504799
Search in Google Scholar Back to article
[12] DEPENBROCK M., Direkte Selbstregelung (DSR) fuer hoch dynamische Drehfeldantriebe mit Stromrivhterschaltung, ETZA, 1985, Vol. 7, 211-218.
Search in Google Scholar Back to article
[13] KRYKOWSKI K., PM BLDC Motor in Electric Drive. Analysis, Properties, Modelling, Wydawnictwo Politechniki Śląskiej, Gliwice 2011, (in Polish).
Search in Google Scholar Back to article
[14] ZAWIRSKI K., Control of Permanent Magnet Synchronous Motor, Wydawnictwo Politechniki Poznańskiej, Poznań 2005, (in Polish).
Search in Google Scholar Back to article
[15] GIERAS J.F., GIERAS I.A., Electric motors - the future, Proc. of 9th Int. Conf. on Power Electronics and Motion Control, PEMC’2000, Kosice, Slovak Republic, 2000, 1.12-1.18.
Search in Google Scholar Back to article
[16] MALINOWSKI M., Sensorless Control Strategies for Three-Phase PWM Rectifiers, Doctoral Thesis, Warsaw University of Technology, Warszawa 2001.10.1016/B978-012402772-5/50012-0
Search in Google Scholar Back to article
[17] SZABAT K., ORŁOWSKA-KOWALSKA T., DYBKOWSKI M., Indirect Adaptive Control of Induction Motor Drive with an Elastic Coupling, IEEE Trans. Industrial Electronics, 2010, Vol. 56, No. 10, 4038-4042.10.1109/TIE.2009.2022514
Search in Google Scholar Back to article
[18] ORŁOWSKA-KOWALSKA T., TARCHAŁA G., DYBKOWSKI M., Sliding-Mode Direct Torque Control and Sliding-Mode Observer with magnetizing reactance estimator for induction motor drive, Mathematics and Computers in Simulation, Vol. 98, 2014, 31-45.10.1016/j.matcom.2013.05.012
Search in Google Scholar Back to article
[19] KAMIŃSKI M., ORŁOWSKA-KOWALSKA T., Adaptive Neural Speed Controllers Applied for a Drive System with an Elastic Mechanical Coupling - a Comparative Study, Engineering Applications of Artificial Intelligence, October 2015, Vol. 45, 152-167.10.1016/j.engappai.2015.06.011
Search in Google Scholar Back to article
[20] WRÓBEL K., SERKIES P.J., Predictive position controller for the induction motor drive, Poznań University of Technology Academic Journals, Electrical Engineering, 2015, No. 83, 169-176.
Search in Google Scholar Back to article
[21] KOWALSKI C.T., Diagnostics of the Induction Motor Drives using Artificial Intelligence Methods, Oficyna Wydawnicza Politechniki Wrocławskiej, Wrocław 2013, (in Polish).
Search in Google Scholar Back to article
[22] ORŁOWSKA-KOWALSKA T., SOBAŃSKI P., Simple diagnostic technique of single IGBT open-circuit fault in SVM-VSI vector-controlled induction motor drive, Bulletin of the Polish Academy of Sciences, Technical Sciences, 2015, Vol. 63, No. 1, 281-288.10.1515/bpasts-2015-0032
Search in Google Scholar Back to article
[23] KLIMKOWSKI K., DYBKOWSKI M., Analysis of vector controlled induction motor drive robust to chosen sensor faults, Poznań University of Technology, Academic Journals, Electrical Engineering, 2014, No. 77, 193-200.
Search in Google Scholar Back to article
[24] WOLKIEWICZ M., TARCHAŁA G., KOWALSKI C.T., Stator windings condition diagnosis of voltage inverter-fed induction motor in open and closed-loop control structures, Archives of Electrical Engineering, 2015, Vol. 64, No. 1, 67-79.10.1515/aee-2015-0007
Search in Google Scholar Back to article
[25] ISERMANN R., Fault Diagnosis Systems. An Introduction from Fault Detection to Fault Tolerance, Springer, New York 2006.10.1007/3-540-30368-5
Search in Google Scholar Back to article
[26] JIN JIANG, XIANG YU, Fault-tolerant control systems: A comparative study between active and passive approaches, Annual Reviews in Control, April 2012, Vol. 36, No. 1, 60-72.10.1016/j.arcontrol.2012.03.005
Search in Google Scholar Back to article

Industrial Drive Systems. Current State and Development Trends

Abstract

Paradigm

My account