The influence of carbide reinforcement on the properties of sintered aluminium alloy matrix composites
References
- Aatthisugan, I. et al. (2020). Effect of Sintering Temperature on Microstructure and Mechanical Properties of Aluminium Composites, IOP Conference Series: Materials Science and Engineering, https://doi.org/10.1088/1757-899X/912/3/032070.
- Bobic, B., Mitrovic, S., Babic, M., Bobic, I. (2010). Corrosion of Metal-Matrix Composites with Aluminium Alloy Substrate, Tribology in Industry, 32, 3–11.
- Dudhmande, A., Schubert, Th., Balasubramanian, M., Kieback, B. (2005). Sintering and Properties of New P/M Aluminium Alloys and Composites, Powder Metallurgy World Congress & Exhibition, Euro PM 2005. Prague.
- Ghasali, E., Fazili, A., Alizadeh, M., Shirvanimoghaddam, K., Ebadzadeh, T. (2017). Evaluation of Microstructure and Mechanical Properties of Al-TiC Metal Matrix Composite Prepared by Conventional, Microwave and Spark Plasma Sintering Methods, Materials, 10, 1255, https://doi.org/10.3390/ma10111255
- Hemalathaa, A., Udhayakumar, P. (2022). Experimental Investigation on Influence of Process Parameters on Properties of Powder Synthesized Aluminium Metal Matrix Composites by Taguchi’s Analysis, Materials Research, 2022, 25(6), https://doi.org/10.1590/1980-5373-MR-2022-0083
- Izadi, H., Nolting, A., Munro, C., Bishop, D.P., Plucknett, K.P., Gerlich, A.P. (2013) Friction stir processing of Al/SiC composites fabricated by powder metallurgy, Journal of Materials Processing Technology, 213, 1900–1907, https://doi.org/10.1016/j.jmatprotec.2013.05.012.
- Kaftelen, H., Ünlü, N., Göller, G., Öveçoglu, M., Henein, H. (2011). Comparative processing-structure-property studies of Al-Cu matrix composites reinforced with TiC particulates, Composites Part A: Applied Science and Manufacturing, 42, 812–824, https://doi.org/10.1016/j.compositesa.2011.03.016.
- Lee, E., Oak, J.J., Kim, Y., Park, Y. (2017). Effect of Added Gas-Atomized Al-Si/SiCp Composite Powder on the Sinterability and Mechanical Properties of Alumix 431 fabricated by Hot-Pressing Process, Korean Journal of Metals and Materials, 55(2), 98–109, https://doi.org/10.3365/KJMM.2017.55.2.98
- Leszczyńska-Madej, B. (2013). The effect of sintering temperature on microstructure and properties of Al-SiC composites, Archives of Metallurgy and Materials, 58(1), 43–48, https://doi.org/10.2478/v10172-012-0148-7
- Loto, R.T. (2018). Investigation of the influence of SiC content and particle size variation on the corrosion resistance of Al-SiC matrix composite in neutral chloride solution, The International Journal of Advanced Manufacturing Technology, https://doi.org/10.1007/s00170-018-3137-9
- Mahesh, L., Sudheer Reddy, J., Mukunda, P.G. (2017). Compaction, Sintering and Characterization of TiC Reinforced Aluminum Metal Matrix Composites, SSRG International Journal of Mechanical Engineering, 4(2), 23–27, https://doi.org/10.14445/23488360/IJME-V4I2P104
- Matli, P.R., Shakoor, R.A., Mohamed, A.M.A., Gupta, M. (2016). Microwave Rapid Sintering of Al-Metal Matrix Composites: A Review on the Effect of Reinforcements, Microstructure and Mechanical Properties, Metals, 6, 143–162, https://doi.org/10.3390/met6070143
- Mohanavel, V., Rajan, K., Suresh Kumar, S., Udishkumar, S., Jayasekar, C. (2018). Effect of silicon carbide reinforcement on mechanical and physical properties of aluminum matrix composites, Materials Today: Proceedings, 5, 2938–2944, https://doi.org/10.1016/j.matpr.2018.01.089
- Murthy, H.C.A., Singh, S.K. (2015). Influence Of TiC Particulate Reinforcement On The Corrosion Behaviour of Al 6061 Metal Matrix Composites, Advanced Materials Letters, 6(7), 633–‘3640, https://doi.org/10.5185/amlett.2015.5654
- Padmavathi, C., Upadhyaya, A. (2010). Densification, Microstructure and Properties of Supersolidus Liquid Phase Sintered 6711Al-SiC Metal Matrix Composites, Science of Sintering, 42, 363–382, https://doi.org/10.2298/SOS1003363P
- Patel, M., Singh, M.K., Sahu, S.K. (2020). Abrasive wear behavior of SiC particulate reinforced AA5052 metal matrix composite, Materials Today, 33(8), https://doi.org/10.1016/j.matpr.2020.03.572
- Pieczonka, T., Kazior, J., Szewczyk-Nykiel, A., Hebda, M., Nykiel, M. (2012). Effect of atmosphere on sintering of Alumix 431D powder, Powder Metallurgy, 55(5), 354–360, https://doi.org/10.1179/1743290112Y.0000000015
- Rai, R.N., Saha, S.C., Datta, G.L., Chakraborty, M., Studies on synthesis of in-situ Al-TiC metal matrix composites, 4th International Conference on Advances in Solidification Processes (ICASP-4). 2016, 117, 012042K, https://doi.org/10.1088/1757-899X/117/1/012042
- Reddy, V., Kumar, G.S., Krishnudu, D.M., Rao, H.R. (2020). Mechanical and wear performances of aluminium-based metal matrix composites, Journal of Bio-and Tribo-Corrosion, 6(3), 1–16, https://doi.org/10.1007/s40735-020-00379-2
- Roy, M., Venkataraman, B., Bhanuprasad, V.V., Mahajan, Y.R., Sundararajan, G. (1992). The Effect of Particulate Reinforcement on the Sliding Wear Behavior of Aluminum Matrix Composites, Metallurgical and Materials Transactions A, 23A, 2833–2847.
- Rudianto, H., Jang, G.J., Yang, S.S., Kim, Y.J., Dlouh, I. (2015). Effect of SiC particles on sinterability of Al-Zn-Mg-Cu P/M alloy, Archives of Metallurgy and Materials, 60(2), 1383–1385, https://doi.org/10.1515/amm-2015-0136
- Rudianto, H., Jang, G.J., Yang, S.S., Kim, Y.J., Dlouh, I. (2015). Evaluation of Sintering Behavior of Premix Al-Zn-Mg-Cu Alloy Powder, Advances in Materials Science and Engineering, 2, 1–8, https://doi.org/10.1155/2015/987687
- Sachin, R., Vamshi Krishna, S., Anil Kumar, S., Karthikeyan, R., Saidamma, K., Sunil Kumar Reddy, K. (2022). Corrosion and wear behavior of AMMCs, a review, Materials Today: Proceedings, 62(6), 4140–4146.
- Sambathkumar, M., Navaneethakrishnan, P., Ponappa, K., Sasikumar, K.S.K. (2016). Mechanical and corrosion behavior of Al7075 (hybrid) metal matrix composites by two step stir casting process, Latin American Journal of Solids and Structures, 14(2), 243–255, https://doi.org/10.1590/1679-78253132
- Vani, V.V., Chak, S.K. (2018). The effect of process parameters in Aluminum Metal Matrix Composites with Powder Metallurgy, Manufacturing Review, 5(7), 1–13, https://doi.org/10.1051/mfreview/2018001
- Verma, A.S., Sumankant, Suri, N.M., Yashpal, K. (2015). Corrosion Behavior of Aluminum base Particulate Metal Matrix Composites: A review, Materials Today: Proceedings, 2, 2840–2851, https://doi.org/10.1016/j.matpr.2015.07.299
- Zakaria, H.M. (2014). Microstructural and corrosion behavior of Al/SiC metal matrix composites, Ain Shams Engineering Journal, 5, 831–838, https://doi.org/10.1016/j.asej.2014.03.003
DOI: https://doi.org/10.37705/TechTrans/e2023005 | Journal eISSN: 2353-737X | Journal ISSN: 0011-4561
Language: English
Submitted on: Jan 26, 2023
Accepted on: Apr 11, 2023
Published on: Apr 16, 2023
Published by: Cracow University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 1 issue per year
Keywords:
Related subjects:
© 2023 Aneta Szewczyk-Nykiel, published by Cracow University of Technology
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 License.