References
- US Patents 2575710 (1951), 3058339 (1962), 3467358 (1969), 3597963 (1971), 4153388 (1979), 4593566 (1986), 4827435 (1989), 5148711 (1992), 5479826 (1996), 6094989 (2000)
- Witos, M. (1994). Diagnosing of technical condition of turbine engine compressor blades using non-contact vibration measuring method. Dissertation, ITWL Warszawa (pol.)
- von Flotow A., Drumm, M. J. (2002). Engine Sensing Technology Hardware & Software to Monitor Engine Rotor Dynamics Using Blade Time-Of-Arrival and Tip Clearance. Hood River, OR, USA http://www.hoodtech.com
- Washburn, R. (2004). Amplitude and Phase Variations Associated with Low Order Resonance Responses Subjected to Time Varying Excitation Sources. Proc. of 9th National Turbine Engine High Cycle Fatigue Conference. March 2004, North Carolina.
- Zielinski, M., Ziller, G. (2005). Noncontact Crack Detection on Compressor Rotor Blades to Prevent Further Damage after HC-Failure. RTO MP-AVT-121 Meeting Proceedings, NATO, paper 19. (www.mtu.de) http://www.mtu.de
- Witos, M., Szczepanik, R. (2005). Turbine Engine Health/Maintenance Status Monitoring with Use of Phase-Discrete Method of Blade Vibration Monitoring. RTO-MP-AVT -121 Meeting Proceedings, NATO, paper 2.
- Duan, F., Fang, Z., Sun, Y. & Ye, S. (2005). Real-time Vibration Measurement Technique Based on Tip-timing for Rotating Blades. Opto-Electronic Engineering. 30(1), 29-31.
- Ayes, B.W., Arnold, S., Vining, Ch. & Howard, R. (2005). Application of Generation 4 Non-contact Stress Measurement System on HCF Demonstrator Engines. Proc. of 10th National Turbine Engine High Cycle Fatigue (HCF) Conference. Dayton, USA.
- http://www.agilismeasurementsystems.com
- Brouckaert, J.F. (editor). Tip Timing and Tip Clearance Problems in Turbomachinary. Lecture Series 3-2007, VKI Belgium, 2007.
- Witos, M. (2008). Turbine Engine Health/Maintenance Status Monitoring with Use of Tip Timing Method. Proc. of 4th European Workshop on Structural Health Monitoring 2008. DEStech Publication Inc., pp. 157-164.
- Witos, M. (2008). On the Modal Analysis of a Cracking Compressor Blade. Research works of AFIT, Issue 23, pp. 21-36
- Vlasov, V.T., Dubov, A.A. (2004). Physical Bases of the Metal Magnetic Memory Method. Moscow: ZAO "Tisso" Publishing House.
- Dubow, A. A., Dubow, Al. A., Kolokolnikow, S. M. (2004). Metoda magnetycznej pamięci metalu (MPM) i przyrządy kontroli. Warszawa: RESURS.
- Ding, X., Li, J., Li, F. & Pang, X. (2008). Magnetic Memory Inspection of High Pressure Manifoolds. 17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China.
- Lisiecki, J. (2004). O metodzie magnetycznej pamięci materiału. Prace Naukowe ITWL, Warszawa, Zeszyt 18, s. 51-84.
- Liu, Q., Lin, J., Chen, M., Wang, C., Wang, G., Zhao, F. Z., Geng, Y. & Zheng, Ch. (2008). A Study of Inspecting the Stress on Downhole Metal Casing in Oilfields with Magnetic Memory Method. 17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China.
- Radziszewski, A. (2001). Doświadczenia z kontroli urządzeń i ich oprzyrządowania w polskich przedsiębiorstwach z zastosowaniem metody magnetycznej pamięci metalu. Materiały 30 KKBN, Szczyrk. Zeszyty Problemowe. Badania Nieniszczące, Nr 6 (2001), s. 165-170.
- Roskosz M. (2005). Zastosowanie metody magnetycznej pamięci metalu do badań wirników sprężarek. Problemy i innowacje w remontach energetycznych. PIRE 2005. VIII Konferencja naukowo-techniczna, Szklarska Poręba, s. 259-270.
- Shi, Ch-L., Dong, Sh-Y., He, P. & Xu, B-Sh. (2008). Influence of Stress Concentration Factor on Magnetic Memory Effect of Steel Samples under Dynamic Tension Load. 17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China.
- Witoś, M., Wiśnoch, M. (2009). Metoda magnetycznej pamięci metalu w diagnozowaniu techniki lotniczej. XV Seminarium "Nieniszczące badania materiałów", 10-13 marca 2009, Zakopane. http://www.ndt-imbn.com/portal
- Shaniavski, A.A. (2007). Modeling of fatigue cracking of metals. Synergetics for aviation. Publishing House of Scientific and Technical Literature "Monography", Ufa (ros.).
- Shaniavski, A.A. (2003). Tolerance Fatigue of Aircraft Components. Synergetics in engineering applications. Publishing House of Scientific and Technical Literature "Monography", Ufa (ros.).
- Murakami, Y., Nomoto, T. & Ueda, T. (1999). Factors Influencing the Mechanism of Superlong Fatigue Failure in Steels. Fatigue and Fracture of Engineering Materials and Structures. Vol. 22, pp. 581-590.
- Murakami, Y., Takada, Y. & Toriyama, T. (1998). Super-long life tension-compression fatigue properties of quenched and tempered 0.46%C steel. International Journal of Fatigue. Vol. 16, pp. 661-667.
- Sakai, T. (2009). Review and prospects for current studies on Very High Cycle Fatigue of metal materials for machine structural use. Journal of Solid Mechanics and Materials Engineering. 3(3), 425-439.
- Witek, L. (2009). Experimental crack propagation analysis on the compressor blades working in high cycle fatigue condition. In A. Niepokólczycki (editor), Fatigue of Aircraft Structures Monographic Series (pp.195-204) Poland, Warsaw: Institute of Aviation Scientific Publications.
- http://www.polytec.com
- http://www.mtiintruments.com
- http://www.vibrationresearch.com/software
- Witoś, M. (2010). Increasing the durability of turbine engine components through active diagnostics and control. Research works of AFIT, Issue 29 (pol.)
- Ostrovsky, L.A., Johnson, P.A. (2001). Dynamic nonlinear elasticity in geomaterials. Revista del Nuovo Cimento. 24(7), 1-46. http://www.lanl.gov/orgs/ees/ees11/geophysics/nonlinear/2001/nrc8730.pdf http://www.lanl.gov/orgs/ees/ees11/geophysics/nonlinear/2001/nrc8730.pdf
- Ferreira, J. V. (1998). Dynamic Response Analysis of Structure with Nonlinear Components. Thesis, University of London.
- Buch, A. (1964). Zagadnienia wytrzymałości zmęczeniowej. Warszawa: PWN.
- Tae-Kyu Lee, J.W. Morris, Jr., Seungkyun Lee & J. Clarke. Detection of fatigue damage prior to crack initiation with scanning SQUID microscopy. Review of Progress in Quantitative Nondestructive Evaluation, Vol. 25.
- Altherton, D.L., Jiles, D.C. (1986). Effects of stress on magnetization. NDT International. 19(1), pp. 15-19.
- Własow, W.T., Dubow, A.A. (2007). Fizyczeskaja teoria procesa "deformacija-razruszenije. Czast I. Fiziczeskije kriterii predelnych sostojanij metałła. Moskwa.
- Birss, R.R., Faunce, C.A. (1971). Stress-Induced Magnetization in Small Magnetic Fields. Journal de Physique, Colloque C I, supplément au n○ 2-3, Tome 32, Février-Mars, page C 1 - 686-688.
- Robertson, I.M. (1991). Magneto-Elastic Behaviour of Steels for Naval Applications, MRL Technical Report, DSTO Materials Research Laboratory. (MRL-TR-90-27)
- Atherton D.L., Sudersena Rao, T., de Sa V., Schönbachler M. (1988). Thermodynamic Correlation Tests Between Magnetostrictive and Magnetomechanical Effects in 2% Mn Pipeline Steel. IEEE Transactions on Magnetics. 24(5), pp. 2177-2180.
- De Silva, C.W. (2007). Vibration Damping, Control and Design. Taylor & Francis
- Blanter, M.S., Golovin, I.S., Neuhäuser, H. & Sinning, H.-R. (2007). Internal Friction in Metallic Materials. A Handbook. Berlin: Springer-Verlag.
- Gui, Y.S., Wirthmann, A., Macking, N., Hu, C.-M. (2009). Direct measurements of nonlinear ferromagnetic damping via the intrinsic foldover effect. Phys. Rev. B80, 060402(R)