Calculation and Experimental Verification of Residual Stresses in Riveted Joints Used in an Airframe

Elżbieta Gadalinska; Wojciech Wronicz; Jerzy Kaniowski; Bartosz Korzeniowski

doi:10.2478/v10164-010-0023-9

.blurhash-client-img { display: none !important; }

Calculation and Experimental Verification of Residual Stresses in Riveted Joints Used in an Airframe

Fatigue of Aircraft Structures

Volume 2010 (2010): Issue 2 (December 2010)

By: Elżbieta Gadalinska, Wojciech Wronicz, Jerzy Kaniowski and Bartosz Korzeniowski

Open Access

|Dec 2010

Abstract

This paper presents diffraction measurements of residual stresses around the rivet, formed during the riveting process. The measurements were made with the XSTRESS-3000 diffractometer, manufactured by Stresstech Oy. The measurements were carried out on specimens made of bare sheet 2024-T3 alloy, (standard AMS-QQ-250 / 4). The measurement results were compared with the FEM simulation results.

The work was performed under the EUREKA IMPERIA project E! 3496.

References

Müller, R., P., G. (1995). An Experimental Investigation on the Fatigue Behavior of Fuselage Riveted Lap Joints; The Significance of the Rivet Squeeze Force, and a Comparison of 2924-T3 and Glare 3. Praca doktorska, Delft University of Technology, Universitatdrukkerij, Delft.
Search in Google Scholar
Mruk, Z. (2008). Riveting process for specimen used in durability tests of riveted joint made with rivets closed with force control and axial strain measure. INSTRUCTION. (in polish). PZL Mielec. (Internal Report 1/DRG-6/42/2008)
Search in Google Scholar
Skorupa, M., Skorupa, A., Machniewicz, T., Korbel, A. (2009). An Experimental Investigation on the Fatigue Performance of Riveted Lap Joints. In: M. J. Bos (Eds.), ICAF 2009, Bridging the Gap between Theory and Operational Practice. Proceedings of the 25th Symposium of the International Committee on Aeronautical Fatigue, Rotterdam, The Nederlands, 27-29 May 2009.
Search in Google Scholar
MSC Marc Documentation, Volume A: Theory and User Information. MSC Corp. 2008.
Search in Google Scholar

Articles in this issue

DOI: https://doi.org/10.2478/v10164-010-0023-9 | Journal eISSN: 2300-7591

Journal RSS Feed

Language: English

Page range: 23 - 36

Published on: Dec 20, 2010

Published by: ŁUKASIEWICZ RESEARCH NETWORK – INSTITUTE OF AVIATION

In partnership with: Paradigm Publishing Services

Publication frequency: 1 issue per year

Related subjects:

Engineering,

Introductions and overviews,

Engineering, other

© 2010 Elżbieta Gadalinska, Wojciech Wronicz, Jerzy Kaniowski, Bartosz Korzeniowski, published by ŁUKASIEWICZ RESEARCH NETWORK – INSTITUTE OF AVIATION
This work is licensed under the Creative Commons License.

Volume 2010 (2010): Issue 2 (December 2010)