Deterministic Approach to Predicting the Fatigue Crack Growth in the 2024-T3 Aluminum Alloy Under Variable Amplitude Loading
By: Dorota Kocańda and Janusz Torzewski
Open Access
|Sep 2010References
- Kocanda, S. (1978).Sijthoff&Noordhoff Int. Publishers.
- Kocańda, S. (1985). Zmęczeniowe pękanie metali [in Polish], 3edition, Warszawa: WNT.
- Schijve, J. (2001).Kluwer Academic Publishers.
- Skorupa, M. (1996 June).Petten, Netherlands: Netherlands Energy Research Foundation. (ECN_R-96-007)
- Skorupa, M. (1998). Load Interaction Effects During Fatigue Crack Growth Under Variable Amplitude Loading - a Literature Review. Part I: Empirical Trends.21(8), 987-1006.
- Kermanidis, A. T., & Pantelakis, S. G. (2001). Fatigue Crack Growth Analysis of 2024-T3 Aluminium Specimens Under Aircraft Service Spectra.24(10), 699-710.
- Yisheng, W., & Schijve, J. (1995). Fatigue Crack Closure Measurements on 2024-T3 Sheet Specimens.18(9). 917-921.
- Ellyin, F., & Wu, J. (1999). An Numerical Investigation on the Effect of an Overload on Fatigue Crack Opening and Closure Behaviour.22(10), 835-848.
- Yasniy, P., & Pyndus, Y. U. (2000). Prediction of fatigue crack growth rate after single overload at different stress ratios. In: Proceedings of the 14Biennial Conference on Fracture. Cracow, Poland, 8-13 September 2002. 3(3). 609-616.
- Schijve, J., Skorupa, M., Skorupa, A., Machniewicz, T., & Gruszczyński, P. (2004). Fatigue crack growth in the aluminium alloy D16 under constant and variable amplitude loading.26(1), 1-15.
- Lazzeri, L., & Ratti, G. (2002). Fatigue crack propagation in thin sheets under typical helicopter spectra. In Blom A. F. (Eds.) The 8International Fatigue Congress, 2-7 June 2002. 1(5). 585-592. Stockholm, Sweden.
- Iyyer, N. S., Kwon, Y. S., & Phan, N. (2003). P-3C crack growth life predictions under spectrum loading. In: Proceedings of the 22International Committee on Aeronautical Fatigue, 5-9 May 2003, ICAF: Fatigue of Aeronautical Structures as an Engineering Challenge, 2, pp.18. Lucerne, Switzerland.
- Skorupa, M. (1996).Petten, Netherlands: Energy Research Foundation. (ECN-R-96-007)
- Kocanda, D., Kocanda, S., & Torzewski, J. (2004). Fatigue crack growth rate in an aircraft aluminium alloy under programmed loading and the capability of its reconstruction [in Polish]., 2(3), 69-83.
- Kocanda, D., Kocanda, S., & Torzewski, J. (2004).[in Polish]. In XXI Symposium on Experimental Mechanics of Solids, 2004, 23-44.
- Kocanda, D., Kocanda, S., & Torzewski, J. (2004). Reconstruction of fatigue crack growth rate for the 2024-T3 aluminium alloy sheet on the basis of fractographic analysis., 3, 361-375.
- Kocanda, D., Kocanda, S., & Torzewski, J. (2005).[in Polish]. In: Proceedings of the 3Symposium on Damage Mechanics of Materials and Structures, July 2005, Bialystok University of Technology, 153-158.
- Kocanda, D., Kocanda, S., & Torzewski, J. (2006).In: Proceedings of the 16European Conference of Fracture, ECF-16, Greece 2006, 177-178 (abstract), full paper on CD.
- Kocanda, D., Kocanda, S., Torzewski, J., & Werner, K. (2004).[in Polish]. In: Proceedings of the XX Symposium on Fatigue and Fracture Mechanics, University of Technology and Life Sciences, Bydgoszcz, 2004, 187-194.
- Kocanda, S., & Szala, J. (1997).PWN, Warszawa.
- Dowling, N. E. (1999)., 2edition, Prentice Hall.
- Fuchs, H. O., & Stephens, R. I. (1980).John Wiley & Sons.
- Rama Chandra Murthy A., Palani, G. S., & Nagesh, R. Iyer (2005).SID, 1(3), 203-213.
- Bochenek, A. (1998).Częstochowa University of Technology.
- Torzewski, J. (2007).Ph.D. Thesis, Military University of Technology WAT.
Language: English
Page range: 102 - 115
Published on: Sep 23, 2010
Published by: ŁUKASIEWICZ RESEARCH NETWORK – INSTITUTE OF AVIATION
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2010 Dorota Kocańda, Janusz Torzewski, published by ŁUKASIEWICZ RESEARCH NETWORK – INSTITUTE OF AVIATION
This work is licensed under the Creative Commons License.