References
- Aktepe, B., & Molent, L. (1999). Management of Airframe Fatigue Through Individual Aircraft Loads Monitoring Programs. Defense Science and Technology Organization, Aeronautical and Maritime Research Laboratory, Victoria, Australia.
- Apicella, A., Armentani, E., & Citarella, R. (1998). Crack Propagation in MultiSite Damage Condition for a riveted Joint. Fisciano: Department of Mechanical Engineering, University of Salerno.
- Apicella, A., Armentani, E., & Citarella, R. (1997). Bidimensional Stress Analysis and SIF's Assessement of a Cracked Aeronautic Doubler-Skin Assembly by BEM and FEM. Fisciano: Department of Mechanical Engineering, University of Salerno.
- Bakuckas, J., Jr. (January 06, 2005). Structural Integrity of transport Airplanes. Airworthiness Assurance Branch, AAR-480, Atlantic City International Airport, from http://airportaircraftsafetyrd.tc.faa.gov/Programs/agingaircraft/Structural/index.htm
- Bruhn, E. (1965). Analisys and design of flight vehicle structures. Cincinnati, Ohio: Tri-State Offset Company.
- Cali, C., Citarella, R., & Soprano, A. (1998). FEM-BEM coupled methodolgy for cracked stiffened panels. Boundary Element Comunications Journal, 8(4).
- Findlay, S., & Harrison, N. D. (2002). Why aircraft fail. Materials Today, November 2002, ISSN: 1369 7021. Hampshire, United Kingdom: Elsevier Science Ltd. 2002, QinetiQ Ltd.
- Keller, E. (2001, May). Real-Time Sensing of Fatigue Crack Damage for Information-Based Decision and Control. A thesis in Mechanical Engineering, The Pennsylvania State University, The Graduate School College of Engineering.
- Khor, K., & Ubhi, H. (2001). Fatigue Crack Closure Studies In Advanced Airframe Aluminium Alloys. Materials Research Group, School of Engineering, Highfield, United Kingdom: University of Southhampton.
- Ko, L. W. (1987, May). Prediction of Service Life of Aircraft Structural Components Using the Half-Cycle Method. Ames Research Center, Dryden Flight Research Facility, Edwards, California: NASA Technical Memorandum 86812.
- Rusmee, P. (2005, September). Fatigue Crack Growth. Retrieved July 27, 2010, from www.mech.utah.edu/~rusmeeha/labNotes/fatigue.html
- Silva, A. (1997). Multiple Site Damage in Riveted Lap-Joints Specimens. Warrington, United Kingdom: EMAS Publishing.
- Vlieger, H., & Ottens, H. (1998, October). Uniaxial and biaxial tests on riveted fuselage lap joints specimens. Office of Aviation Research Washington, U. S. Departament of Transportation, Federal Aviation Administration. (DOT/FAA/AR-98/33)